基于到达时差法的目标定位系统

运用声被动定位理论探索空中目标的定位问题。建立了一种平面波声被动定位模型,利用简易被动声传感器阵列,分析并设计了定位系统的总体结构。提出了一种简易的计算到达时差电路设计方案,此电路利于目标的实时定位。在利用这种系统定位远距离目标时,可消除有效声速的影响。最后给出了几组实验结果,证明了此系统的可行性,但对近距离目标的定位结果较差,模型需进一步研究。     

基于实际案例的导弹装备战斗损伤评估

指出了基于实际案例的通用导弹装备战斗损伤评估内容及特点,提出了战斗损伤评估的量化标准,定义了战损率的概念;采用向量夹角余弦方法综合出了导弹装备各级组件的战损率及车辆的战损量化值,并通过实例证明了该方法具有所需信息量小、主客观综合性强、评估方法易于仿真实现等优点.     

PMSM空间矢量控制在坦克全电炮控中的应用

介绍了数字交流全电式坦克炮控系统的设计,针对基于DSP(数字信号处理器)的永磁同步电动机(PMSM)电压空间矢量算法的特点,研究出了优化控制的新算法,减少了计算量,提高了系统的性能.试验结果表明系统具有良好的动静态性能,能显著地提高炮控系统的各项战技指标.     

仿生偏振光导航传感器量测模型研究

仿生偏振导航传感器仿照昆虫利用天空偏振光进行导航的原理,测量载体的姿态和方位,具有精度高、功耗低等优势,是一种新型的导航传感器．根据偏振导航的原理分析偏振导航传感器的测量参考矢量和导航能力,根据其参考矢量的数量及性质,对偏振导航传感器使用在不同性质载体上的测量进行建模,并提出其对载体进行定姿的条件．     

弹丸初速对磁阻型线圈发射器发射性能的影响分析

通过设置弹丸初速并研究其对单级磁阻型线圈发射器发射性能的影响,模拟分析前一级线圈弹丸出口速度对后一级线圈发射性能影响的规律;利用Ansoft有限元仿真软件进行了动态仿真,得到弹丸初速对单级磁阻型线圈发射器驱动电流、驱动线圈感应电压、电磁力、弹丸出VI速度、弹丸位移及能量转换效率等影响的规律．研究表明：弹丸初速越大,经过单级线圈加速后弹丸出口速度也越大,但弹丸出口速度增量减小;随着弹丸初速增大,能量转换效率呈现先增大后减小的趋势．     

Investigations on influence of rifle automatics system action on values of energetic efficiency coefficient of muzzle brakes

The objective of the paper was to compare values of the muzzle brake efficiency coefficient for a rifle with active or inactive automatics systems. Special laboratory stand designed for investigating the recoil process was used. The motion of the rifle was detected by the use of the laser interferometer and the optical camera. The recoil velocity time courses were determined by smoothing and differentiation of experimental position records. The results of the experiments indicated that in the case of an active automatics system two values of the recoil velocity can be used for calculation of the energetic efficiency coefficient: the maximum recoil velocity and the final recoil velocity at the end of the automatics action cycle. The values of the coefficient, calculated using these two values of the recoil velocity, distinctly differ. However, it was shown that their values indicate the same relation between the efficiency of various muzzle brakes. The value of the efficiency coefficient, determined on the basis of the final recoil velocity value, is practically the same as that determined on the basis of the final recoil velocity value for the rifle with an inactive automatics system.     

钢管在冲击荷载作用下的变形与失效破坏

为研究钢管在弹体侵彻过程中的变形特点,基于ANSYS/LS-DYNA软件,采用Johnson-Cook模型,模拟了半球形弹体以不同速度正向冲击钢管时的非线性动力响应情况。结果表明：弹体速度越小,钢管的抗侵彻性能越好;弹体速度越接近临界破坏速度,钢管降低弹体速度的能力就越明显;弹体冲击钢管时,钢管上表面比下表面更容易产生大变形,消耗更多的弹体动能,并在抗侵彻过程中伴有局部凹陷、蝶形变形和贯穿现象。实验结果可为圆柱壳结构钢管在冲击荷载作用下的耗能分析提供参考。     

新型舰炮使用测速雷达后观测距离偏差射击校正方法

针对测速雷达精确校正初速后的观测距离偏差校正方法进行研究,建立不同校正方法校正量计算模型,对比分析不同校正方法校正精度,得出了使用测速雷达精确校正初速后观测距离偏差应采用折合空气密度校正精度高的结论,为中大口径舰炮部队作战与训练和装备的研制改进提供依据。     

Study of nano-nitramine explosives: preparation,sensitivity and application

Nano-nitramine explosives (RDX, HMX, CL-20) are produced on a bi-directional grinding mill. The scanning electron microscope (SEM) observations show that the prepared particles are semi-spherical, and the narrow size distributions are characterized using the laser particle size analyzer. Compared with the micron-sized samples, the nano-products show obvious decrease in friction and impact sensitivities. In the case of shock sensitivities, nano-products have lower values by 59.9% (RDX), 56.4% (HMX), and 58.1% (CL-20), respectively. When nano-RDX and nano-HMX are used in plastic bonded explosives (PBX) as alternative materials of micron-sized particles, their shock sensitivities are significantly decreased by 24.5% (RDX) and 22.9% (HMX), and their detonation velocities are increased by about 1.7%. Therefore, it is expected to promote the application of nano-nitramine explosives in PBXs and composite modified double-based propellants (CMDBs) so that some of their properties would be improved.     

Long-rod penetration: the transition zone between rigid and hydrodynamic penetration modes

Long-rod penetration in a wide range of velocity means that the initial impact velocity varies in a range from tens of meters per second to several kilometers per second. The long rods maintain rigid state when the impact velocity is low, the nose of rod deforms and even is blunted when the velocity gets higher, and the nose erodes and fails to lead to the consumption of long projectile when the velocity is very high due to instantaneous high pressure. That is, from low velocity to high velocity, the projectile undergoes rigid rods, deforming non-erosive rods, and erosive rods. Because of the complicated changes of the projectile, no well-established theoretical model and numerical simulation have been used to study the transition zone. Based on the analysis of penetration behavior in the transition zone, a phenomenological model to describe target resistance and a formula to calculate penetration depth in transition zone are proposed, and a method to obtain the boundary velocity of transition zone is determined. A combined theoretical analysis model for three response regions is built by analyzing the characteristics in these regions. The penetration depth predicted by this combined model is in good agreement with experimental result.