Long-rod penetration: the transition zone between rigid and hydrodynamic penetration modes

Long-rod penetration in a wide range of velocity means that the initial impact velocity varies in a range from tens of meters per second to several kilometers per second. The long rods maintain rigid state when the impact velocity is low, the nose of rod deforms and even is blunted when the velocity gets higher, and the nose erodes and fails to lead to the consumption of long projectile when the velocity is very high due to instantaneous high pressure. That is, from low velocity to high velocity, the projectile undergoes rigid rods, deforming non-erosive rods, and erosive rods. Because of the complicated changes of the projectile, no well-established theoretical model and numerical simulation have been used to study the transition zone. Based on the analysis of penetration behavior in the transition zone, a phenomenological model to describe target resistance and a formula to calculate penetration depth in transition zone are proposed, and a method to obtain the boundary velocity of transition zone is determined. A combined theoretical analysis model for three response regions is built by analyzing the characteristics in these regions. The penetration depth predicted by this combined model is in good agreement with experimental result.     

Theoretical study of an energetic material di-1H-1,3,4-triazole derivatives

Computations by density functional theory (DFT) method are performed on a series of di-1H-1,3,4-triazole derivatives with different substituents and linkages. The heat of formation (HOF) is predicted by the designed isodesmic reactions. The predicted results reveal that –N₃ and –NN– groups are effective structural units for increasing the HOF values of the di-1H-1,3,4-triazole derivatives. The HOMO–LUMO gap is affected by the substituents and linkage groups. Detonation performance is evaluated using the Kamlet–Jacobs approach based on the calculated density and HOF. The results indicate that –NO₂, –NF₂, –NH–, –NH–NH– and –NN– groups are helpful for enhancing the detonation properties of di-1H-1,3,4-triazole derivatives. The bond dissociation energy and bond order of the weakest bonds are analyzed to investigate their stability. It is observed that the –CH₂–, –CH₂–CH₂– and –CHCH– groups are effective structural units for improving the stabilities of these derivatives. Considering the detonation performance and the stability, five compounds are screened as the potential candidates for high energy density materials.     

Scale-up synthesis and characterization of 2,6-diamino-3,5-dinitropyrazine-1-oxide

2,6-diamino-3,5-dinitropyrazine-1-oxide (ANPZO), as an insensitive high explosive, with a high yield and excellent purity has been prepared at pilot plant scale by an improved method. The synthesized ANPZO is characterized by IR, laser granularity measurement, SEM and HPLC. The particle analysis revealed that the improved method could offer desired product with average particle size of 40 μm and high purity (>98.45%). The experimental parameters exhibited that the detonation velocity of the formulation based on ANPZO was higher than that of the corresponding TATB formulation. The DSC curve showed that the exothermic decomposition of the product occurred at the temperature between 300.5 °C and 360.4 °C. Furthermore, the sensitivity test suggests its safe nature towards mechanical stimulus.     

Analysis on the resistive force in penetration of a rigid projectile

According to the dimensionless formulae of DOP (depth of penetration) of a rigid projectile into different targets, the resistive force which a target exerts on the projectile during the penetration of rigid projectile is theoretically analyzed. In particular, the threshold V_c of impact velocity applicable for the assumption of constant resistive force is formulated through impulse analysis. The various values of V_c corresponding to different pairs of projectile-target are calculated, and the consistency of the relative test data and numerical results is observed.     

圆柱形装药驱动轴向预制破片飞散特性

为了增强柱形战斗部轴向威力,在无壳柱形战斗部底面布置单层离散的预制破片.开展圆柱形TNT装药驱动轴向预制破片飞散试验,获得预制破片的最大初速、飞散角等特征参数;运用LS-DYNA软件对装药驱动预制破片过程进行数值模拟,阐述预制破片群飞散过程;对装药驱动整体平板理论计算公式进行改进,获得预制破片的最大初速.结果表明:破片...     

稀薄气体动理论中介观尺度数值模拟的加速方法

针对滑移流、早期过渡流区域采用离散速度法(discrete velocity method, DVM)求解Boltzmann方程收敛速度极慢、计算资源消耗大的难题,提出全流场耦合介观/宏观方程加速方法。在介观层面基于有限差分的DVM求解Boltzmann方程,在宏观层面基于有限体积的压力耦合方程组半隐式方法求解矩方程,充分利用纳维-斯托克斯-傅里叶/R26矩方程在低克努森数下的快速收敛特性,对介观方程进行加速。基于高阶Hermite多项式重构分布函数,完成宏观方程与介观方程之间的数据传输。仿真结果表明:全流场耦合介观/宏观方程的加速方法在滑移流、早期过渡流区域具有显著加速性能,最大降低了95.28%的计算时长;但对中、大克努森数流域,加速性能大幅度下降。     

基于测速定轨的一类自适应样条滤波方法

提出了一种测速定轨的实时算法。该方法基于样条表示飞行轨道速度参数 ,在只有多个测速元信息的情况下 ,建立了自适应Kalman滤波递推算法 ,实时给出了较高精度的飞行器轨道参数     

永磁式同步电动机的矢量图

根据稀土永磁材料性能和以其制成的同步电动机工作的特点,提出了永磁式同步电动机的矢量图;并举例说明在矢量控制系统中的应用.     

机械故障自动特征向量提取与智能识别系统

有效特征向量的提取和状态识别是设备状态监测与故障诊断中的关键技术.近年来,国内外非常重视特征参量有效性的研究和模式识别方法的探讨.笔者介绍了“机械故障自动特征向量提取与智能识别系统”的设计、结构与功能、实现方法及其应用.     

致伤因素及其对目标综合效应的估算方法

本文综述了致伤因素对目标的致伤效果,取决于击中的部位和释放能量的多少,且随着击中部位和因素的改变而不同。指出各因素对目标的致伤作用既有相互影响又有其独立性。并给出了致伤因素对目标综合效应的估算公式。