Simulation on the dynamic stability derivatives of battle-structure-damaged aircrafts

Accurately evaluating the aerodynamic performance of a battle-structure-damaged aircraft is essential to enable the pilot to optimize the flight control strategy. Based on CFD and rigid dynamic mesh techniques, a numerical method is developed to calculate the longitudinal and longitudinal-lateral coupling forces and moments with small amplitude sinusoidal pitch oscillation, and the corresponding dynamic de-rivatives of two fragment-structure-damaged and two continuous-rod-damaged models modified from the SACCON UAV. The results indicate that, at the reference point set in this paper, additional positive damping is generated in fragment-damaged configurations; thus, the absolute values of the negative pitch dynamic derivative increase. The missing wingtip induces negative pitch damping on the aircraft and decreases the value of the pitch dynamic derivative. The missing middle wing causes a noticeable increase in the absolute value of the pitch dynamic derivative;the missing parts on the right wing cause the aircraft to roll to the right side in the dynamic process, and the pitch-roll coupling cross dynamic derivatives are positive. Moreover, the values of these derivatives increase as the damaged area on the right wing increases, and an optimal case with the smallest cross dynamic derivative can be found to help improve the survivability of damaged aircraft.     

在柴油机放热曲线计算中两个关键问题的解决方法

对影响柴油机放热曲线精度计算的因素进行了讨论 ,并对影响放热率计算的主要问题如动态上止点修正、示功图光顺处理两个主要环节进行了分析研究 ,提出了解决方法 .     

带脉冲负荷的电站柴油机动态性能分析

通过对某一个在脉冲负荷作用下配置了液压调速器的电站柴油机系统的动态仿真计算 ,确定了改善这类系统动态性能的方法 ,并通过调整使系统动态性能达到了要求     

基于分形几何的信号特征提取技术及其应用研究

针对分形客观展现事物原貌的特点 ,从工程应用的角度分别对信号的分形性验证、有效分析区间的确定、分形性描述和刻画、设备状态的趋势分析等方面作了探讨 ,形成了基于分形几何的信号特征提取技术 ,并描绘出基于分形几何的设备故障诊断模式     

血小板在凝血中作用的动力学模型

在生化实验的基础上提出了血小板在凝血中作用的动力学模型,通过定性分析和数值模拟,得到了血小板的激活比率、因子Ⅷ、Ⅸ对凝血酶生成有重要影响的一系列结论.     

A comparative study of three tool replacement/operation sequencing strategies in a flexible manufacturing system

This paper studies three tool replacement/operation sequencing strategies for a flexible manufacturing system over a finite time horizon: (1) failure replacement—replace the tool only upon failure, (2) optimal preventive tool replacement for a fixed sequence of operations, and (3) joint scheduling of the optimal preventive tool replacement times and the optimal sequence of operations. Stochastic dynamic decision models are used for strategies 2 and 3. The optimization criterion for strategies 2 and 3 is the minimization of the total expected cost over the finite time horizon. We will show through numerical studies that, with the same amount of information, the total expected costs can be reduced considerably by choosing an optimal strategy. Our conclusion is that in flexible manufacturing, optimal tool replacement and optimal operations sequencing are not separate issues. They should be considered jointly to minimize the expected total cost. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 479–499, 2000     

弹炮混编防空群兵力分配模型

针对对付现代日益发展的空袭手段的一种有效方法--弹炮混编防空布势中存在的防空武器种类繁多,兵力分配复杂,难以充分发挥各自效能的问题,建立了非线性规划模型,利用动态规划对该模型进行分析,运用拉格朗日降维法进行降维,将三维降为二维.经防空作战的实例验证该算法不但能将两维降到单维,而且还可以将多维降到单维,能节省计算机的内存使用率,提高仿真计算的速度,符合信息化条件下指挥决策实时化的要求且分配效果较好.     

考虑刚度影响的双输入转矩分流式齿轮系统均载特性

为了对转矩分流齿轮系统均载特性进行更加深入的研究,建立系统非线性动力学模型,采用数值仿真方法计算系统的均载系数,分析联动轴扭转刚度、输出轴支撑刚度、输入转速以及轴位角对均载系数的影响规律,并对齿轮系统进行实验研究.研究结果表明:输出端的均载系数大于输入端的均载系数,高压输入端的均载系数大于低压输入端的均载系数;均载系数...     

非对称通气空泡多相流场特性研究

通气空泡的非对称介质分布将影响其水动力特性,继而影响空泡稳定控制,目前对其流动特性的认识较为局限。为揭示非对称通气空泡的流动机理,基于循环水洞实验及数值仿真开展了多相流场特性研究。结果表明：非对称流动导致空泡形成非对称沾湿区,依据流动介质的不同,非对称沾湿区可分为透明气相区、水气混合区及沾湿区。水气混合边界由底端母线向顶端母线发展过程中,滞止高压减小,空泡厚度增加,液体进入空泡内部方式从主要由轴向进入转化为主要由周向进入,同时水气混合物在来流作用下逐渐聚集,水气混合区面积随之增大。随着空泡闭合点逐渐靠近顶端母线,沿周向流动的液体层发展至顶端母线,顶端母线处则形成低速、高压、水气掺混区,湍流特性增强,并伴有大量细碎空泡涡的脱落。     

基于XML的装备维修信息标准化

基于XML的装备维修信息标准化是我军装备信息保障的发展趋势.以设备技术说明书为例,对其进行了标准化信息分解,构建了相应的DTD和数据库结构,并讨论了实现标准化维修信息动态传输与交换的相关问题.