分段履带式水陆两栖车减阻增速试验及数值仿真

为了研究分段履带式水陆两栖车的水动力性能,实现减阻增速,将尾翼板安装到水陆两栖车的方艉部,并开展了水池试验和仿真研究,两者的研究结果具有较好的一致性。通过仿真研究了车体的纵向重心位置、尾翼板的长度和角度对水陆两栖车阻力性能的影响,并分析了阻力成分的变化趋势。研究结果表明:车体纵向重心位置在540～560 mm 时,车体所受水阻力最小;在速度为3～5 m/s时,长度为156 mm,与水平面夹角为10°的尾翼板减阻效果最明显,相比于原裸车体的阻力,减阻率达到34.3%;加装尾翼板可以增加车体的尾部中空区长度,相当于增加了水线长,增大了长宽比。该研究表明:适当调节重心位置和优化尾翼板参数,可以有效实现水陆两栖车的减阻增速。     

决策树报文分类算法

报文分类是网络的基本功能,研究人员在过去二十年提出了众多解决方案,其中决策树报文分类算法由于吞吐量高、适用于多字段、可流水线化等特点受到了广泛关注和深入研究。本文介绍了决策树算法最新研究成果,阐述了决策树报文分类算法的几何意义、常用技术和测试基准,从节点切割技术和规则集分组技术两个维度对决策树算法进行了系统分析和归纳。针对两类常用的决策树构建技术介绍了其中的典型算法,对比了各种典型算法的设计思路和特点,分析了它们的适用场景。总结并展望了决策树算法的下一步研究方向。     

伞衣优化设计对群伞系统气动特性的影响分析

随着载人航天、深空探测等航天任务的蓬勃发展,航天器回收载荷质量大幅提高,以单具降落伞为功能核心的传统减速系统已不能满足大质量回收载荷日益提高的迫切要求,发展群伞减速着陆系统是实现大载重航天器高效减速和无损着陆要求的发展方向。本文采用数值模拟手段对群伞系统的气动特性开展仿真研究,结合环帆伞构型优化设计,分析了多种构型下群伞系统的气动特性。通过对仿真结果进行流场分析和数据对比发现,开窗/开缝设计既能够确保群伞系统具有良好的阻力特性,又能够维持群伞系统的工作稳定性,避免单伞之间由于受力而发生碰撞现象。采用数值仿真手段不仅可以提高降落伞研制效率,降低研发成本,也为设计人员掌握群伞系统的工作原理、促进降落伞设计理论发展提供了有力保证。     

基于作业记账日志的并行作业特征分析工具 JobCAT

并行作业特征分析是负载分析的重要基础。作业记账日志是开展作业特征分析的重要数据源。由于作业记账日志中没有记录应用名称,现有工具无法按应用名称开展作业特征分析。提出基于关键字模糊匹配的作业记账日志标记方法,设计通用的作业数据模型和柔性可扩展软件架构,集成实现并行作业特征分析工具JobCAT。通过某超级计算机系统百万量级作业记账日志数据测试验证,JobCAT的作业记账日志标记率大于95%。JobCAT支持7个插件、29项统计报表,可一键生成应用的作业特征分析报告,对负载分析研究具有实用价值。     

A study on the surface overpressure distribution and formation of a double curvature liner under a two-point initiation

The formation mechanism of an EFP(explosively formed projectile) using a double curvature liner under the overpressure effect generated by a regular oblique reflection was investigated in this paper.Based on the detonation wave propagation theory,the change of the incident angle of the detonation wave collision at different positions and the distribution area of the overpressure on the surface of the liner were calculated.Three-dimensional numerical simulations of the formation process of the EFP with tail as well as the ability to penetrate 45# steel were performed using LS-DYNA software,and the EFP ve-locity,the penetration ability,and the forming were assessed via experiments and x-ray photographs.The experimental results coincides with those of the simulations.Results indicate that the collision of the detonation wave was controlled to be a regular oblique reflection acting on the liner by setting the di-mensions of the unit charge and maintaining the pressure at the collision point region at more than 2.4 times the CJ detonation when the incident angle approached the critical angle.The distance from the liner midline to the boundary of the area within which the pressure ratio of the regular oblique reflection pressure to the CJ detonation pressure was greater than 2.5,2,and 1.5was approximately 0.66 mm,1.32 mm,and 3.3 mm,respectively.It is noted that pressure gradient caused the liner to turn inside out in the middle to form the head of the EFP and close the two tails of the EFP at approximately 120μs.The penetration depth of the EFP into a 45# steel target exceeded 30 mm,and there was radial expansion between the head and tail of the EFE increasing the penetration resistance of the EFP.Therefore,the structural size of the unit charge and the liner can be further optimized to reduce resistance to increase the penetration ability of the EFP.     

科学管理、精益管理与精确作战工程保障研究

设计是作战行动筹划的重要步骤,精确工程保障需要对工程保障行动进行精密的设计和精确管理与控制。科学管理采用科学实验的方法,通过劳动方法标准化和差别计件工资制度,有效提高了工作效率,其基本原理经过百余年的实际检验,被证明是一个成熟有效的管理方法。借鉴科学管理理论,需要对工程保障行动进行动作研究,进而研究工程保障行动的作业标准,以期提高其保障效率。精益管理是在科学管理在新的历史时期的发展与改进,它使用了准时制、零库存、均衡生产、持续改进等先进的管理理念和六西格玛管理、成组技术等先进技术,为基于信息系统体系作战的工程保障能力生成提供了有益的借鉴,可加深我们对精确工程保障的理解,促进精确工程保障研究的可操作性。     

虚拟现实技术在美军实战化训练中的应用及启示

虚拟现实技术应用于军事领域,给军事训练带来了又一场革命。文章立足军队当前实战化训练背景,在分析虚拟现实技术及其特征的基础上,通过对虚拟现实技术在美军实战化训练中的应用现状分析,提出虚拟现实技术应用于我军实战化训练的发展对策。     

径向载荷作用下管道挤压变形过程数值模拟

野外埋地敷设的长距离输油管道发生断裂等较大事故时,采用管道局部挤压的方式可以在较短时间内将管道快速压扁以截断流油。为设计管道挤压截流装置,运用ANSYS Workbench建立上下压头加载作用下管道挤压的有限元模型,完成对ф159 mm×5 mm的45号钢挤压变形模拟仿真,得到管道挤压的等效应力、位移分布、变形范围和载荷-位移曲线等。将模拟数据与实验数据进行对比,两者结果比较吻合,可以为管道泄漏抢修提供理论和实践参考。     

Numerical simulation of the natural fragmentation of explosively loaded thick walled cylinders

The ability to predict the natural fragmentation of an explosively loaded metal casing would represent a significant achievement. Physically-based material models permit the use of small scale laboratory tests to characterise and validate their parameters. The model can then be directly employed to understand and design the system of interest and identify the experiments required for validation of the predictions across a wide area of the performance space. This is fundamentally different to the use of phenomenologically based material algorithms which require a much wider range of characterisation and validation tests to be able to predict a reduced area of the performance space. Eulerians numerical simulation methods are used to describe the fragmentation of thick walled EN24 steel cylinders filled with PBXN-109 explosive. The methodology to characterise the constitutive response of the material using the physically based Armstrong–Zerilli constitutive model and the Goldthorpe path dependent fracture model is described, and the results are presented. The ability of an Eulerian hydrocode to describe the fragmentation process and reproduce the experimentally observed fragment mass and velocity distributions is presented and discussed. Finally the suitability of the current experimental analysis methodology for simulation validation is addressed.     

Numerical simulation of base flow with hot base bleed for two jet models

In order to improve the benefits of base bleed in base flow field, the base flow with hot base bleed for two jet models is studied. Two-dimensional axisymmetric Navier–Stokes equations are computed by using a finite volume scheme. The base flow of a cylinder afterbody with base bleed is simulated. The simulation results are validated with the experimental data, and the experimental results are well reproduced. On this basis, the base flow fields with base bleed for a circular jet model and an annulus jet model are investigated by selecting the injection temperature from 830 K to 2200 K. The results show that the base pressure of the annular jet model is higher than that of the circular jet model with the changes of the injection parameter and the injection temperature. For the circular jet model, the hot gases are concentrated in the vicinity of the base. For the annular jet model, the bleed gases flow into the shear layer directly so that the hot gases are concentrated in the shear layer. The latter temperature distribution is better for the increase of base pressure.