基于试验研究的大型油罐冷却用水量估算

根据利用移动摇摆炮对10×10^4m^3着火油罐冷却试验的结果,对大型着火油罐冷却用水量实验和理论数据进行对比分析,得出冷却用水量的估算方法,为大型油罐火灾扑救提供参考和依据。     

载机军舰航空燃油分段接力式补给模型

为解决载机军舰远洋作战时所需的航空燃油按时补给问题,建立了带有自动调节系统的载机军舰航空燃油分段接力式补给的预测模型。对航空燃油分段接力式补给进行研究,采用系统动力学方法,构建影响补给船队补给效率的各元素因果回路图与存量流量图及预测模型,并以系统动力学软件Vensim PLE 5.9为平台进行建模仿真。运行结果表明,该模型在扰动条件下能进行航空燃油分段接力式补给趋势的预测,可为航空燃油分段接力式补给方案的制定提供理论依据。     

有限元法在管道水击计算中的应用探索

管道水击基本方程属于一阶双曲型偏微分方程,虽然目前水击主要采用特征线法进行计算,但有限元法也可以求解双曲型方程,据此尝试采用伽辽金加权余量法对管道水击进行有限元数值计算。根据管道水击的基本微分方程组,选取适当的速度、压力插值函数,建立管道水击的有限元模型,并通过实例分析,和特征线法相比较,证实有限元法在管道水击计算中是有应用前景的,有必要作进一步深入研究。     

Vertically restrictive pricing in supply chains with price‐dependent demand

We examine the behavior of a manufacturer and a retailer in a decentralized supply chain under price‐dependent, stochastic demand. We model a retail fixed markup (RFM) policy, which can arise as a form of vertically restrictive pricing in a supply chain, and we examine its effect on supply chain performance. We prove the existence of the optimal pricing and replenishment policies when demand has a linear additive form and the distribution of the uncertainty component has a nondecreasing failure rate. We numerically compare the relative performance of RFM to a price‐only contract and we find that RFM results in greater profit for the supply chain than the price‐only contract in a variety of scenarios. We find that RFM can lead to Pareto‐improving solutions where both the supplier and the retailer earn more profit than under a price‐only contract. Finally, we compare RFM to a buyback contract and explore the implications of allowing the fixed markup parameter to be endogenous to the model. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006.     

Bullwhip and reverse bullwhip effects under the rationing game

When an unreliable supplier serves multiple retailers, the retailers may compete with each other by inflating their order quantities in order to obtain their desired allocation from the supplier, a behavior known as the rationing game. We introduce capacity information sharing and a capacity reservation mechanism in the rationing game and show that a Nash equilibrium always exists. Moreover, we provide conditions guaranteeing the existence of the reverse bullwhip effect upstream, a consequence of the disruption caused by the supplier. In contrast, we also provide conditions under which the bullwhip effect does not exist. In addition, we show that a smaller unit reservation payment leads to more bullwhip and reverse bullwhip effects, while a large unit underage cost results in a more severe bullwhip effect. © 2017 Wiley Periodicals, Inc. Naval Research Logistics 64: 203–216, 2017     

Optimal division of inventory between depot and bases

We consider a problem of optimal division of stock between a logistic depot and several geographically dispersed bases, in a two‐echelon supply chain. The objective is to minimize the total cost of inventory shipment, taking into account direct shipments between the depot and the bases, and lateral transshipments between bases. We prove the convexity of the objective function and suggest a procedure for identifying the optimal solution. Small‐dimensional cases, as well as a limit case in which the number of bases tends to infinity, are solved analytically for arbitrary distributions of demand. For a general case, an approximation is suggested. We show that, in many practical cases, partial pooling is the best strategy, and large proportions of the inventory should be kept at the bases rather than at the depot. The analytical and numerical examples show that complete pooling is obtained only as a limit case in which the transshipment cost tends to infinity. © 2017 Wiley Periodicals, Inc. Naval Research Logistics, 64: 3–18, 2017     

光电探测系统电源通用化设计与实现

为应对全天候、全天时实时使用要求,光电探测系统逐渐从功能单一的光电探测系统演变为多功能、多传感器的综合光电系统。因此,具体进行工程设计时,系统电源组件的技术指标要合理,满足系统使用要求。同时,组件维修、故障诊断、部件互换也要容易。针对此问题,基于描述的光电探测系统电源通用化设计原则,提出了一种可工程化设计方案。该方案对电源硬件结构设置、电源控制管理和电源功能扩展设计等进行了讨论,并给出具体设计方法。通过实际应用验证表明,该方案能够满足系统对电源组件的要求。     

A single‐period inventory placement problem for a serial supply chain

This article addresses the inventory placement problem in a serial supply chain facing a stochastic demand for a single planning period. All customer demand is served from stage 1, where the product is stored in its final form. If the demand exceeds the supply at stage 1, then stage 1 is resupplied from stocks held at the upstream stages 2 through N, where the product may be stored in finished form or as raw materials or subassemblies. All stocking decisions are made before the demand occurs. The demand is nonnegative and continuous with a known probability distribution, and the purchasing, holding, shipping, processing, and shortage costs are proportional. There are no fixed costs. All unsatisfied demand is lost. The objective is to select the stock quantities that should be placed different stages so as to maximize the expected profit. Under reasonable cost assumptions, this leads to a convex constrained optimization problem. We characterize the properties of the optimal solution and propose an effective algorithm for its computation. For the case of normal demands, the calculations can be done on a spreadsheet. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48:506–517, 2001     

消防供水的计算和分析

介绍国际上消防供水的计算方法,并对消防供水方式进行分析.针对国内外的差异,提出消防供水的新思路.     

槽头式野战管线水击波速计算方法研究

按照弹性水击理论,管线内发生水力瞬变时,其水击波速取决于管子的弹性、流体的可压缩性和管子受约束的情况。对于给定的输送介质,焊接式固定输油管线的水击波速是一个常数。而槽头式野战管线采用连接器连接,胶圈密封,这种特殊的连接方式改变了管子整体的弹性摸量,从而使水击波速的常规计算方法不再适用。本文研究了野战管线连接器连接方式时水击波速的影响,实验研究了在受到约束时,橡胶的弹性模量随所受压力的变化而变化的规律,推导出野战管线水击波速平均计算方法,推导的公式表明:与焊接式固定管线不同,野战管线的水击波速随管线内压力的增大而增大。