海水中电磁波传播特性的研究

利用电磁场传播所满足的Maxwell方程组,计算和分析出电磁波在导电媒质中传播时的特征;并以海水为例,得出一些有意义的结论,为海水中通信、信号探测、引信研究等方面工作提供理论依据.     

Research on the influences of confining pressure and strain rate on NEPE propellant: Experimental assessment and constitutive model

In order to study the influences of confining pressure and strain rate on the mechanical properties of the Nitrate Ester Plasticized Polyether (NEPE) propellant, uniaxial tensile tests were conducted using the self-made confining pressure system and material testing machine. The stress-strain responses of the NEPE propellant under different confining pressure conditions and strain rates were obtained and analyzed. The results show that confining pressure and strain rate have a remarkably influence on the mechanical responses of the NEPE propellant. As confining pressure increases (from 0 to 5.4 MPa), the maximum tensile stress and ultimate strain increase gradually. With the coupled effects of confining pressure and strain rate, the value of the maximum tensile stress and ultimate strain at 5.4 MPa and 0.0667 s⁻¹ is 2.03 times and 2.19 times of their values under 0 MPa and 0.00333 s⁻¹, respectively. Afterwards, the influence mechanism of confining pressure on the NEPE propellant was analyzed. Finally, based on the viscoelastic theory and continuous damage theory, a nonlinear constitutive model considering confining pressure and strain rate was developed. The damage was considered to be rate-dependent and pressure-dependent. The constitutive model was validated by comparing experimental data with predictions of the constitutive model. The whole maximum stress errors of the model predictions are lower than 4% and the corresponding strain errors are lower than 7%. The results show that confining pressure can suppress the damage initiation and evolution of the NEPE propellant and the nonlinear constitutive model can describe the mechanical responses of the NEPE propellant under various confining pressure conditions and strain rates. This research can lay a theoretical foundation for analyzing the structural integrity of propellant grain accurately under working pressure loading.     

舰用锅炉胀接结构可靠性与后退式胀管器的应用

针对舰用锅炉换热管与管板胀接结构可靠性,分析了影响胀接的主要因素,运用弹性理论对胀接结构进行了理论分析,并首次对舰用锅炉应用双轴承后退式胀管器进行管子与管板试件的胀接试验研究,推导出适合机械式胀接的胀管率近似理论计算方法.     

Numerical investigation on free air blast loads generated from center-initiated cylindrical charges with varied aspect ratio in arbitrary orientation

In current guidelines, the free air blast loads (overpressure and impulse) are determined by spherical charges, although most of ordnance devices are more nearly cylindrical than spherical in geometry. This may result in a great underestimation of blast loads in the near field and lead to an unsafe design. However, there is still a lack of systematic quantitative analysis of the blast loads generated from cylindrical charges. In this study, a numerical model is developed by using the hydrocode AUTODYN to investigate the influences of aspect ratio and orientation on the free air blast loads generated from center-initiated cylindrical charges. This is done by examining the pressure contours, the peak overpressures and impulses for various aspect ratios ranged from 1 to 8 and arbitrary orientation monitored along every azimuth angle with an interval of 5°. To characterize the distribution patterns of blast loads, three regions, i.e., the axial region, the vertex region and the radial region are identified, and the propagation of blast waves in each region is analyzed in detail. The complexity of blast loads of cylindrical charges is found to result from the bridge wave and its interaction with primary waves. Several empirical formulas are presented based on curve-fitting the numerical data, including the orientation where the maximum peak overpressure emerges, the critical scaled distance beyond which the charge shape effect could be neglected and blast loads with varied aspect ratio in arbitrary orientation, all of which are useful for blast-resistant design.     

Growth model of cavity generated by the projectile impacting liquid-filled tank

The high-speed impact of a projectile on a liquid-filled tank causes the hydraulic ram, in which a cavity is formed. To study the growth characteristics of the cavity, the formation mechanism of the cavity is analyzed. The effect of Reynolds number and Mach number on drag coefficient is considered, the axial and radial growth models of the cavity are established respectively. The relative errors between the cavity length calculated by the axial growth model, the cavity diameter calculated by the radial growth model and Ma L. Y. test results are less than 20%, which verifies the effectiveness of the axial and radial growth models. Finally, numerical simulation is carried out to study the growth characteristics of the cavity caused by the projectile impacting the satellite tank at the velocity of 4000 m/s. The cavity length and diameter calculated by the axial and radial growth models agree well with those obtained by simulation results, indicating that the cavity length and diameter in satellite tank can be accurately calculated by the axial and radial growth models.     

潜艇自航模水下长波遥控系统

提出了利用无线长波对水下潜艇自航模进行长波遥控的通信技术,阐述了长波遥控的发射、接收及天线系统的硬件组成和系统设计。对发射天线的现场测试结果进行了分析,提出了实际电路的阻抗匹配实现方法;对接收信号的噪声和灵敏度等有关问题进行了分析,采用天线的方向性自适应控制技术解决了潜艇水下接收,在实际应用中取得较好的效果。     

面向管理员的网络可生存性建模与计算

从网络系统安全评价和管理的角度出发,紧密结合可生存性定义和可生存性的四个特征属性,建立了面向管理员的网络可生存性量化模型;给出了该模型的算法流程;提出了面向管理员的网络可生存性计算公式,该公式中包括恢复率和系统状态转移矩阵的计算方法,反映出可生存性对网络空闲资源和恢复时间的要求;最后进行了面向管理员的网络可生存性计算的仿真实验,表明可以利用有限的网络资源实现高水平的网络可生存性。     

卫星移动通信信道模型及仿真

对移动卫星通信的三种典型信道进行了完整的理论分析.通信信号在不同的信道参数条件下,经过瑞利(Rayleingh)信道、莱斯(Rician)信道和阻挡效应下的莱斯信道(Rician/Lognormal)进行了计算机仿真,得到了仿真结果.经分析比较发现,信道参数不同,得到的误码率曲线不同.信道的性能主要取决于信道参数,各种因素的影响可以归结到这些参数的影响,理论分析和仿真实验结果一致.     

连续波对某数字电路的辐照效应实验研究

在GTEM室中用正弦连续波对某导弹装备上的1块数字控制电路进行电磁辐照,在30 V/m的场强下,引入的电磁骚扰还未导致被监测的与非门产生错误反转时,产生控制信号的自激多谐振荡器却受到了严重的电磁干扰。用计算机对此干扰进行仿真分析,并最后提出方波控制信号产生电路的电磁加固措施。     

大气波导对电子侦察设备的影响

电磁波异常传播,使武器装备的作战使用更加灵活机动。为充分利用大气波导条件,发挥电子侦察设备效能,使战场态势向有利于己方方向转化,在介绍大气波导分类的基础上,建立评估电子侦察设备的有效探测区的模型,给出用抛物线方程及其分布傅里叶算法计算电磁波在表面波导条件下传播的数值模拟方法,并分析了大气波导对电子侦察设备的影响情况。