局域网传输系统可用性分析

采用可用性概念 ,分析局域网络系统的工作情况 ,对系统的平均故障间隔时间、中断率等参数进行评估 ,为工程设计和系统维护提供参考依据     

On Growing Operating Costs in the Armed Forces

Operating costs per unit of input or output are often claimed to grow faster in defence than elsewhere in the economy. In this paper, we outline several possible reasons as to why operating costs increase at higher rates in defence, including differences in the input factor mix and productivity growth, the technological complexity required to maintain the relative effect of weapon systems and a gradual reduction in the number of units and activity. We investigate whether operating costs grow at a faster rate than elsewhere in the economy, by estimating growth in real output unit costs in the Norwegian Armed Forces for the period 1994–2013, using activity as a measure of output. We find no increase beyond general inflation in structural (fixed) costs, whereas activity-based (variable) costs per unit of activity increase significantly.     

Effect of wire tension on different output responses during wire electric discharge machining on AISI 304 stainless steel

WEDM is used in machining conductive materials where it is required to obtained complicated and intricate shapes with high accuracy. Various applications are in the field of automobile, medical industries, aerospace etc. WEDM is an economical machining option with short product development cycle. Surface roughness, kerf width, Material removal rate, Recast layer hardness and surface microhardness in WEDM are most important responses. In this paper, effect of varied Wire tension on SR, KW, MRR, RCL hardness and surface microhardness on AISI 304 have been investigated. Pulse on time, pulse off time, current and dielectric fluid are taken as fixed parameter. Results show that Wire tension influences the SR, MRR and Surface microhardness and has no effect on kerf width in case of Stainless steel 304.     

两道同侧扫掠激波作用下形成的三维平板边界层

为探索一种减弱扫掠激波/边界层干扰强度的侧压方式,采用数值计算方法研究两道同侧扫掠激波作用下形成的三维平板边界层。对三维边界层的流动机理进行研究,并与相同气流偏转角的一道扫掠激波作用下形成的三维边界层进行定量比较。研究表明,存在两道同侧扫掠激波时,第一道扫掠激波使侧壁附近边界层变薄,进而使第二道扫掠激波与再附形成的边界层的相互作用减弱,从而总的效果是两道扫掠激波与边界层的相互作用强度比一道扫掠激波的弱;两道扫掠激波的气流总偏转角与一道扫掠激波的相同,相交后汇聚成的激波强度与一道扫掠激波的基本相同,之前被两道扫掠激波"扫"起来的边界层在汇聚激波作用下还呈现锥形流动,分离线和来流的夹角也与一道扫掠激波的基本相同。     

Growth model of cavity generated by the projectile impacting liquid-filled tank

The high-speed impact of a projectile on a liquid-filled tank causes the hydraulic ram, in which a cavity is formed. To study the growth characteristics of the cavity, the formation mechanism of the cavity is analyzed. The effect of Reynolds number and Mach number on drag coefficient is considered, the axial and radial growth models of the cavity are established respectively. The relative errors between the cavity length calculated by the axial growth model, the cavity diameter calculated by the radial growth model and Ma L. Y. test results are less than 20%, which verifies the effectiveness of the axial and radial growth models. Finally, numerical simulation is carried out to study the growth characteristics of the cavity caused by the projectile impacting the satellite tank at the velocity of 4000 m/s. The cavity length and diameter calculated by the axial and radial growth models agree well with those obtained by simulation results, indicating that the cavity length and diameter in satellite tank can be accurately calculated by the axial and radial growth models.     

基于航向自动舵实船环境模拟的海浪扰动模型研究

以航向自动舵实船模拟环境的建立为背景,讨论了等效到舵叶舵角上的海浪扰动数学模型的建立,并通过仿真,分析了各种因素对海浪扰动的影响.     

炸药冲击波激励气体辐射的数值模拟

建立了炸药冲击波激励气体辐射的物理模型和数学模型。用MMIC - 2D软件对爆炸过程进行了模拟计算。分析了冲击波作用下气体的流动特性 ,并给出了爆炸全场的密度分布及随时间的变化规律     

MS860动态测姿试验精度分析

为了评估动态MS860型GPS姿态测量性能,将其安装在某船上进行系统测试.采用动态滤波的方法采集MS860姿态信息,同时同步采集某型平台罗经的数据.在此基础上,用误差统计方法评估姿态测量系统的精度性能.结果表明GPS姿态测量系统可以满足舰船姿态测量的需要,其航向的测量精度优于平台罗经系统.     

悬浮式深弹的被动测距技术

通过测量线谱信号相位变化率来测量目标距离变化率,说明其原理并推导出相应的结果,根据对有关试验结果的分析表明,该方法简单易行,适合于浅水海域中悬浮式深弹测距使用,从而为深水炸弹反鱼雷提供了相关技术支持.     

阻燃剂对聚氯乙烯燃烧产烟影响的实验研究

利用烟密度仪、锥形量热仪研究了阻燃剂对聚氯乙烯燃烧产烟的影响。结果表明,三氧化二锑、三聚氰胺等四种阻燃剂使PVC热解燃烧的产烟量大幅度增加,促进PVC热解燃烧失重;红磷、氢氧化镁等四种阻燃剂对PVC热解燃烧的产烟量及燃烧失重影响较小;硼酸锌使PVC热释放速率峰值降低、质量损失速率减小,热释放速率峰值出现的时间推迟。随着氢氧化镁、十溴二苯乙烷在PVC中含量的增加,其燃烧产烟量减少。氢氧化镁的量对PVC燃烧失重速率和失重量影响明显。三氧化二锑和氢氧化镁混合、十溴二苯乙烷和聚磷酸铵混合阻燃对PVC热解燃烧的产烟影响较小,而三氧化二锑与硼酸锌混合阻燃剂对PVC的燃烧影响显著。