A general approach to the shape of failure rate and MRL functions

Failure rate and mean residual life are two important characteristics for studying reliability of products. In literature, some work studied the shape of failure rate function based on the knowledge of the associated probability density function; some other work investigated the shape of mean residual life function based on the shape of the associated failure rate function separately for continuous case and discrete case. In this article, a general approach is developed which can be applied to the aforementioned studies. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

基于能量度量的星载AIS信号自适应码元同步抽取算法

基带信号码元同步抽取是目前星载AIS(Automatic Identification System)信号处理中的一个难点问题,针对过零检测和迟门早门等现有算法存在的不足,提出了基于能量度量的基带信号自适应码元同步抽取算法。将基带信号根据采样率和码速率的比值分割成相同的段的组合,之后分别计算每个段内相应样点的能量度量,最后选择使能量度量最大时的样点集作为最优同步抽取样点,该样点集具有最大信噪比。仿真结果验证了该算法误码率优于过零检测和迟门早门算法。     

箱式屏蔽效能测试方法及影响因素分析

为测试强电磁场作用下材料的屏蔽效能,基于屏蔽材料的屏蔽原理,提出一种在GTEM室内置屏蔽箱测试材料屏蔽效能的新方法,构建实验平台,仿真分析屏蔽箱窗口尺寸及测试探头位置对测试结果的影响．实验结果表明：测试窗口大小和测试位置对测试材料的屏蔽效能有影响．其主要影响因素是屏蔽效能的测试频率下限,并确定了0．6m×0．6m窗口的测试频率下限为55MHz,0．3m×0．3m测试窗口的测试频率下限为250MHz．     

机动输油管线泄漏监测技术

机动输油管线采用露天方式快速铺设,容易发生泄漏事故。根据负压波原理,利用一种基于可变窗长中值滤波器的泄漏检测算法,在不降低检测灵敏度的前提下,能有效降低泄漏误报率。该算法在保证泄漏定位精度的同时,还能保持较高的实时性,较好地满足机动输油管线泄漏监测的需要。     

切向空气气流对激光辐照碳纤维复合材料的影响

实验研究了靶材表面存在和不存在切向空气气流时,975nm连续激光对碳纤维增强树脂基复合材料的辐照效应,发现切向气流的加载有利于激光对碳纤维复合材料的破坏.从理论上对激光辐照下碳纤维复合材料的破坏机理进行了初步分析,基于碳的氧化特性和氧化反应机理,推导了碳纤维的氧化速率方程.采用改进的光滑粒子方法,对激光辐照下复合材料树...     

如何估计软件的MTBF

软件剩余初始故障个数No、平均无故障时间MTBF、故障暴露率λ和软件运行的成功率θ等是衡量软件可靠性的重要参数.其中对高可靠性软件(包括军用软件等)MTBF是最重要的.传统的MTBF计算方法有2种一是计算发生故障的平均时间间隔二是通过软件可靠性模型进行估计.前者代价较大,后者不太准确.本文从软件的失败率入手研究软件的MTBF,这是一个比较贴近实际的方法.     

后方油库整体生存概率分析计算

针对我军后方油库特点,探讨了油库整体生存概率计算的基本思路和方法,分析了各类分项目标生存概率的计算方法,采用层次分析对后方油库各分项目标权值进行了详细分析计算,可为后方油库伪装防护效能评估提供依据。     

Optimal (τ, T) opportunistic maintenance of a k‐out‐of‐n:G system with imperfect PM and partial failure

The opportunistic maintenance of a k‐out‐of‐n:G system with imperfect preventive maintenance (PM) is studied in this paper, where partial failure is allowed. In many applications, the optimal maintenance actions for one component often depend on the states of the other components and system reliability requirements. Two new (τ, T) opportunistic maintenance models with the consideration of reliability requirements are proposed. In these two models, only minimal repairs are performed on failed components before time τ and the corrective maintenance (CM) of all failed components are combined with PM of all functioning but deteriorated components after τ; if the system survives to time T without perfect maintenance, it will be subject to PM at time T. Considering maintenance time, asymptotic system cost rate and availability are derived. The results obtained generalize and unify some previous research in this area. Application to aircraft engine maintenance is presented. © 2000 John Wiley & Sons;, Inc. Naval Research Logistics 47: 223–239, 2000     

分层介质系统声透射问题的传递矩阵方法

分层介质中的声透射问题一直是应用声学中的一个棘手问题 ,因为随着层数增加 ,需要求解的方程数目也成比例地增加 ,要按常规方法得到解析表达式几乎不可能 .该文引入传递矩阵的概念使这一问题变得相当简单 ,而且可以很方便地用于程序化处理 ,对于吸声材料的结构设计具有很大的实用价值 .     

线导鱼雷导引弹道的动力学分析

通过线导鱼雷常用导引方法—三点法、前置角法导引弹道的动力学分析 ,推导出不同方法下鱼雷旋回速率的解析表达式 ,并通过数字仿真对鱼雷线导导引弹道动力学特性进行探讨 ,明确了线导鱼雷导引弹道特性与导引方法之间的关系 .