超短波数据调制解调器的研究与实现

超短波数据通信在国内日趋发展,迫切需要专门用于超短波的数据调制解调器。本文将有线、短波数据通信的理论和方法有机地结合在一起,研究和设计了多速率的超短波数据modem 的方案,对系统的性能和关键技术作了分析,并给出了计算机模拟结果。     

基于MIDAS的大跨度斜拉桥行波效应分析

针对宜巴段三塔四跨斜拉桥工程实例,结合MIDAS软件,进行动态时程分析,对比研究了行波效应对桥塔、桥墩各控制点的位移、剪力以及轴力的纵向地震反应的影响。通过施加-EL-Centro纵向地震波作用,模拟出斜拉桥控制点的位移、内力地震反应最大值,得出结论：对于多塔斜拉桥,行波效应对各桥塔塔底、各桥塔塔顶内力、位移响应的影响不同。     

基于AHP的舰船大风浪中航行安全评价

舰船在大风浪中航行的风险是一个比较重要的研究领域,其风险程度很难用量化进行评估.为了更好地方便研究,并为以后的研究奠定理论基础,采用了层次分析法,建立舰船在大风浪中航行的安全评价体系,同时构造了判断矩阵,并进行了层次单排序一致性检验,求出了每个影响舰船航行安全因素的权重,并通过实例进行解算,得出结果和实际情况相比大致相似.此方法可以较好地对舰船在大风浪中航行的安全进行直观的描述,可供舰船长用来掌握舰船航行的风险情况,进而进行有效的风险决策.     

Numerical simulation of the blast wave of a multilayer composite charge

The numerical simulation of a blast wave of a multilayer composite charge is investigated. A calculation model of the near-field explosion and far-field propagation of the shock wave of a composite charge is established using the AUTODYN finite element program. Results of the near-field and far-field calculations of the shock wave respectively converge at cell sizes of 0.25–0.5 cm and 1–3 cm. The Euler––flux-corrected transport solver is found to be suitable for the far-field calculation after mapping. A numerical simulation is conducted to study the formation, propagation, and interaction of the shock wave of the composite charge for different initiation modes. It is found that the initiation mode obviously affects the shock-wave waveform and pressure distribution of the composite charge. Additionally, it is found that the area of the overpressure distribution is greatest for internal and external simultaneous initiation, and the peak pressure of the shock wave exponentially decays, fitting the calculation formula of the peak overpressure attenuation under different initiation modes, which is obtained and verified by experiment. The difference between numerical and experimental results is less than 10%, and the peak overpressure of both internal and external initiation is 56.12% higher than that of central single-point initiation.     

Analysis of the stress wave and rarefaction wave produced by hypervelocity impact of sphere onto thin plate

Shock wave is emitted into the plate and sphere when a sphere hypervelocity impacts onto a thin plate. The fragmentation and phase change of the material caused by the propagation and unloading of shock wave could result in the formation of debris cloud eventually. Propagation models are deduced based on one-dimensional shock wave theory and the geometry of sphere, which uses elliptic equations (corresponding to ellipsoid equations in physical space) to describe the propagation of shock wave and the rarefaction wave. The “Effective thickness” is defined as the critical plate thickness that ensures the rarefaction wave overtake the shock wave at the back of the sphere. The “Effective thickness” is directly related to the form of the debris cloud. The relation of the “Effective thickness” and the “Optimum thickness” is also discussed. The impacts of Al spheres onto Al plates are simulated within SPH to verify the propagation models and associated theories. The results show that the wave fronts predicted by the propagation models are closer to the simulation result at higher impact velocity. The curvatures of the wave fronts decrease with the increase of impact velocities. The predicted “Effective thickness” is consistent with the simulation results. The analysis about the shock wave propagation and unloading in this paper can provide a new sight and inspiration for the quantitative study of hypervelocity impact and space debris protection.     

Experimental research on the instability propagation characteristics of liquid kerosene rotating detonation wave

In order to study the instability propagation characteristics of the liquid kerosene rotating detonation wave (RDW), a series of experimental tests were carried out on the rotating detonation combustor (RDC) with air-heater. The fuel and oxidizer are room-temperature liquid kerosene and preheated oxygen-enriched air, respectively. The experimental tests keep the equivalence ratio of 0.81 and the oxygen mass fraction of 35% unchanged, and the total mass flow rate is maintained at about 1000 g/s, changing the total temperature of the oxygen-enriched air from 620 K to 860 K. Three different types of instability were observed in the experiments: temporal and spatial instability, mode transition and re-initiation. The interaction between RDW and supply plenum may be the main reason for the fluctuations of detonation wave velocity and pressure peaks with time. Moreover, the inconsistent mixing of fuel and oxidizer at different circumferential positions is related to RDW oscillate spatially. The phenomenon of single-double-single wave transition is analyzed. During the transition, the initial RDW weakens until disappears, and the compression wave strengthens until it becomes a new RDW and propagates steadily. The increased deflagration between the detonation products and the fresh gas layer caused by excessively high temperature is one of the reasons for the RDC quenching and re-initiation.     

超声导波在管道中传播的可视化模拟研究

利用有限元方法建立管道导波3-D模型,通过在管道中激励纵向超声波,模拟导波在管道中的传播形态。根据回波信号的传播时间计算了纵波传播速度,与频散曲线得到的纵波速度符合较好。从观测点取得的波信号能够反映超声波在管道中传播时存在的反射和衰减现象,动画结果能够形象直观地反映导波在管道中传播的情形,实现了导波传播的可视化模拟。该研究有利于更好地解释导波在管道无损检测中出现的频散特征。     

关于潜艇装备劳兰C导航仪技术问题的研究

本文提出了一种改善潜艇现有天线接收性能的方法,从而解决了在潜艇上安装使用劳兰C导航仪的关键技术问题。     

短波通信天线场防雷保护技术研究

结合短波通信工程实践,简要介绍天线场防雷保护系统的组成、保护级别、保护范围等内容,着重研究短波天线及天线场的防雷技术与保护措施,并进一步讨论了短波天线场设计中如何设置和布置避雷系统及相关注意问题。     

BM弹头雷达一维像干扰初探

根据目前反导雷达使用宽带信号对目标进行一维成像,检测目标几何特征的特点,从弹道导弹(BM)弹头雷达一维像(HRRP)特征出发,参照宽带线性调频雷达成像原理,讨论了对BM弹头HRRP可采取的几种电子干扰措施,包括对BM弹头HRRP的模拟和遮盖,给出了模拟BM弹头HRRP时所需生成的各信号特征,分析了每种遮盖干扰信号的功率利用情况,最后分析了每种干扰措施的优缺点。