低电压宽供电电源光电开关电路的研究

提出了一种新的光电开关电路设计形式（差分形式的光电开关电路）,解决了在低电压宽供电电源下,光电开关电路难以正常工作的问题。电路结构简单,并适用于高供电电源的光电开关。     

巨型机环境下UNIX逻辑盘的实现

本文针对巨型机的体系结构特点,对UNIX逻辑设备概念进行了扩充,引入巨型机逻辑盘的概念,给出了一种逻辑盘的实现。逻辑盘的概念使得文件系统的大小独立于物理盘的容量、支持巨型文件或巨型文件系统。     

CO2激光器虚共焦腔凸面镜失调的实验研究

高功率激光器工作时,由于谐振腔反射镜上的光强分布不均匀,会导致镜面温度不均匀,从而造成镜面的角向偏转,致使激光器光轴发生偏转,严重影响输出光束质量,甚至造成不出光。文中主要从实验研究了CO2激光器虚共焦腔凸面镜失调对激光器输出光束质量的影响,实验结果表明,当凸面镜失调角接近于由理论计算而得的失调临界角时,输出光斑约为半个圆环,与理论分析非常符合,当凸面镜失调角达到约为失调临界角的4.5倍时,完全停止振荡。     

应用于引信遥控装定的火控信息交联装置

自差式多普勒无线电引信发射和接收装置是引信遥控装定的重要内容.在装置中引入单片机和FPGA技术,能快速、准确的装定已经出炮口300 ms以上的密集弹药,选择工作方式,可供选择的工作方式有近炸、碰炸、遥控炸、定时(距)炸.引信具备近目标发射电磁波功能,能有效抗有源干扰、海杂波干扰和信道干扰.FPGA的高度集成特性减小了编码和解码、调制与解调电路的体积,减小了引信工作电路.     

基于动力学模型的柔性加工设备机电系统状态监测与故障预警

在建立的加工设备机电系统精确动力学模型及对模型参数实时辨识的基础上［１］，建立柔性加工设备机电系统的状态监测模型，包括ＢＡＹＥＳ故障检测、突发故障检测及故障分析与定位等；同时利用Ｋｕｌ－ｂａｃｋ信息距离和多层递阶ＡＲ模型实现系统的状态与故障预警。在加工设备上的实验表明模型可行有效，它能排除柔性多变工况、时变性及随机干扰对监测与预警功能的影响，提高其鲁棒性和自适应能力。     

Parametric study of single confined fragment launch explosive device

In this article, parametric study of single confined fragment launch device was carried out. The configuration proposed was further studied to derive the empirical relationship for effect of fragment size, charge size, confinement thickness on fragment velocity. The simulations were carried out using ANSYS-AUTODYNE explicit solver. Fragment velocities were estimated as a function of different parametric combinations of explosive quantities, charge length to diameter ratio, fragment height to diameter ratio, confinement thickness, fragment material and fragment mass. The data was further converted to charge to metal ratio under fragment and confinement. It was observed that, increase in confinement thickness, charge quantity and decrease in fragment height increases the fragment velocity. It is also noted that, charge to metal mass ratio under fragment significantly affects the fragment velocity. At the end, an empirical relationship for fragment velocity interms of all these parameters was established. Using these relations, two velocities 1831.92 m/s and 2523.9 m/s required for NATO STANAG 4496 IM test were estimated. The design parameters for these velocities are presented. Also, the results estimated using the empirical relationship has been compared with published experimental data. Error in the predicted velocities is within the acceptable range. The empirical relationship proposed will be useful for finalization of design of the fragment launch device.     

某型车载导弹发射制导装置现场快速检测方法

某型装甲车载反坦克导弹系统的发射制导装置,集光、机、电多种技术于一体,技术状态易受装载、运输等因素的影响。在导弹射击前,一般应在现场对发射制导装置进行快速检测以确定其技术状态。为了解决现场快速检测问题,分析了该型导弹系统发射制导装置的结构和技术特点,确定了现场快速检测的内容：用点光源的电视图像检测两个光轴不平度;用电压比较法检测点火电压和点火程序正确性;用指令频率变化检测控制指令正确性。开发了适于现场快速检测的装置,为部队射击保障提供了一种决策支持方法。     

风载荷对某发射装置待发射状态的影响

应用冯.卡门功率谱和谐波合成法生成了考虑脉动效应的瞬时风速时程曲线;计算了发射筒各段的等效风压及等效力矩,给出了作用于发射筒迎风面的风压总值及等效力矩;最后将载荷作为输入条件,进行动力学分析,获得了风载荷作用下发射装置的动态响应。通过分析可知:由于发射装置具有刚度强、质量大的特点,风载荷作用下发射装置的速度、加速度响应均较低,因此,风载荷主要影响发射筒的倾斜程度。     

Research on a MEMS pyrotechnic with a double-layer barrier safety and arming device

As an essential component of ammunition, pyrotechnics can control ignition with high reliability. However, due to limits of fabrication technology, traditional pyrotechnics are bulky. To achieve both functionality and miniaturization, MEMS pyrotechnics integrate initiator, safety-and-arming (S&A) device and lead charge and keep all components within a small size. MEMS S&A devices, as the core component to ensure system safety, are difficult to achieve active and rapid response to control signals with high safety and reliability. In order to overcome the difficulty, we propose the design and characterization of a MEMS pyrotechnic with a double-layer barrier S&A device. The MEMS pyrotechnic is a high-integrated device with an overall size of 13.4 × 8.5 × 5.2 mm³. The initiator is a NiCr bridge foil covered with an Al/CuO energetic film, which can generate flame when ignited by an excitation voltage. To match the flame energy, lead styphnate is chosen in this study as the lead charge. The S&A device contains four semi-circular barriers, which are directly driven by V-shape electro-thermal actuators to gain active control of the pyrotechnics' ignition condition with rapid response. To improve the system's reliability, the four barriers are axisymmetrically placed in two layers, two barriers for each layer, to constitute a double-layer structure with a thickness of 100 μm. The ignition test results show that the S&A device can prevent the initiator from detonating the lead charge in safety condition. In arming condition, the lead charge will be detonated.     

Research on design and firing performance of Si-based detonator

For the chip integration of MEMS (micro-electromechanical system) safety and arming device, a miniature detonator needs to be developed to reduce the weight and volume of explosive train. A Si-based micro-detonator is designed and fabricated, which meets the requirement of MEMS safety and arming device. The firing sensitivity of micro-detonator is tested according to GJB/z377A-94 sensitivity test methods: Langlie. The function time of micro-detonator is measured using wire probe and photoelectric transducer. The result shows the average firing voltage is 6.4 V when the discharge capacitance of firing electro-circuit is 33 μF. And the average function time is 5.48 μs. The firing energy actually utilized by Si-based micro-detonator is explored.