不同腐蚀状态不锈钢管焊缝区 碱性腐蚀的电位噪声特征

利用电化学电位噪声方法检测了不同腐蚀状态304与316两种不镑钢管焊缝区试样在室温碱液中的腐蚀行为,并采用电化学噪声时域谱、频域谱进行了分析,结果表明:不同腐蚀状态焊缝试样的腐蚀电位及噪声时城谱特征不同,可利用电位噪声频城谱的高频斜率K值定性判定是否发生局部腐蚀,同时可根据频城谱中发生事件特殊频率fn区分材料的腐蚀状态...     

水下目标辐射噪声高精度仿真方法

在对水下高速运动目标实测辐射噪声数据频谱特征充分分析的基础上,基于能量聚点理论建立了一种“平台型λ水平能量聚点”辐射噪声连续谱模型.利用该模型实现了对水下目标辐射噪声的仿真.首先,对离散化的λ取值分别计算其能量聚点频率区间,然后用谐波叠加法生成频带内的时域信号,将所有频带的信号进行叠加就得到辐射噪声的时域信号,与传统的...     

非平稳噪声背景下DOA分步估计方法研究

针对相干和非相干信源同时存在的情况,结合斜投影理论和互相关矢量Toeplitz矩阵重构(CVTR)的方法,提出一种新的信源DOA分步估计方法。该方法把相干信源和非相干信源分开分辨,对相干信源用CVTR方法来恢复为满秩,避免了常规平滑算法阵列孔径损失大、运算量大的缺点;用斜投影算子而非差分方法对信源进行分离,不受相关矩阵须为Toeplitz结构的限制,使得算法可适用于任意阵列结构形式。这种分步分辨思路可有效增强信源过载能力,同时在互相关矢量Toeplitz矩阵重构过程中,可把非平稳噪声协方差矩阵转换成白噪声结构,使得算法对非平稳噪声有较好的适应能力。     

Signal‐to‐interference‐plus‐noise ratio estimation for wireless communication systems: Methods and analysis

The Signal‐to‐Interference‐plus‐Noise Ratio (SINR) is an important metric of wireless communication link quality. SINR estimates have several important applications. These include optimizing the transmit power level for a target quality of service, assisting with handoff decisions and dynamically adapting the data rate for wireless Internet applications. Accurate SINR estimation provides for both a more efficient system and a higher user‐perceived quality of service. In this paper, we develop new SINR estimators and compare their mean squared error (MSE) performance. We show that our new estimators dominate estimators that have previously appeared in the literature with respect to MSE. The sequence of transmitted bits in wireless communication systems consists of both pilot bits (which are known both to the transmitter and receiver) and user bits (which are known only by the transmitter). The SINR estimators we consider alternatively depend exclusively on pilot bits, exclusively on user bits, or simultaneously use both pilot and user bits. In addition, we consider estimators that utilize smoothing and feedback mechanisms. Smoothed estimators are motivated by the fact that the interference component of the SINR changes relatively slowly with time, typically with the addition or departure of a user to the system. Feedback estimators are motivated by the fact that receivers typically decode bits correctly with a very high probability, and therefore user bits can be thought of as quasipilot bits. For each estimator discussed, we derive an exact or approximate formula for its MSE. Satterthwaite approximations, noncentral F distributions (singly and doubly) and distribution theory of quadratic forms are the key statistical tools used in developing the MSE formulas. In the case of approximate MSE formulas, we validate their accuracy using simulation techniques. The approximate MSE formulas, of interest in their own right for comparing the quality of the estimators, are also used for optimally combining estimators. In particular, we derive optimal weights for linearly combining an estimator based on pilot bits with an estimator based on user bits. The optimal weights depend on the MSE of the two estimators being combined, and thus the accurate approximate MSE formulas can conveniently be used. The optimal weights also depend on the unknown SINR, and therefore need to be estimated in order to construct a useable combined estimator. The impact on the MSE of the combined estimator due to estimating the weights is examined. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

直升机工作特性建模与飞行性能仿真

以涡轮轴发动机工作特性建模为中心,对某系列直升机飞行性能进行仿真研究,力争实现对直升机实施"基于状态的维修"。讨论了直升机飞行性能和涡轮轴发动机特性的表述方法,建立了涡轮轴发动机的数学模型,并讨论了其解法与应用。基于发动机台架性能仿真程序对该模型进行简化,得到涡轮轴发动机工作过程的热力学模型。对发动机性能进行计算完成飞行性能仿真,应用结果表明该方法是可信、高效的。     

振荡器相位噪声对GNSS接收机载波跟踪数字锁相环性能的影响

关于振荡器相位噪声引起的GNSS接收机载波跟踪数字锁相环相位抖动,目前的解析结论仍是基于模拟锁相环的,不能说明相位抖动大小与中频积累时间的关系,因此不能有效指导高灵敏度、高精度载波跟踪锁相环参数设计.本文首先推导中频积累输出的频率白噪声、频率游走噪声序列的功率谱,然后基于数字二阶锁相环离散线性模型导出了环路相位抖动公式并进行了仿真验证,最后对公式进行了解析和数值分析.分析结果表明:频率白噪声、频率游走噪声引起的二阶载波跟踪锁相环相位抖动,均随中频积累时间单调递增,随环路带宽先递减后递增.本文推得的相位抖动公式及其随参数变化特征的分析结论,可用于具体指导GNSS载波跟踪锁相环参数设计.     

基于Bell态与Two-qutrit态无信息泄漏的量子对话协议

基于Einistein-Podolsky-Rosen纠缠对与量子安全直接通信(QSDC),提出了一个新的基于Bell态的量子对话协议.通信双方Alice和Bob只需要进行一次通信即可实现双方之间秘密的同时交换.该方案利用一个随机比特串和检测光子来实现安全性,能够抵抗截获/重放攻击、特洛伊木马攻击和纠缠攻击等典型攻击.很多近期提出的协议中存在严重的信息泄漏,也就是说任何窃听者都可以从合法通信者的公开声明中提取到部分秘密信息,我们的方案很好地克服了这一问题.协议的效率较高,可以达到66.7％,同时由于纠缠态粒子只需要进行一次传输,该方案更简单易行.将该协议推广到two-qutrit态,其安全性仍能得到保证.     

模2n加与模2加相对结合律相容程度的分析

模2n加和模2加是密码算法设计中经常使用的两个编码环节,二者对于结合律的相容程度是指改变二者形成的混合等式中两个变量的运算顺序所造成的误差大小.本文研究了模2n加与模2加相对于结合律的相容程度,给出了在改变[(χ(+)y)+z]mod 2n的运算顺序时,产生的噪声函数ξ(x,y,z)=[(x(+)y)+nz](+)[x(+)(y+nz)]在各点取值的概率分布规律,以及对噪声函数所有取值点的概率值平方求和的计算公式.这些结论在区分攻击中有一定的应用价值.     

潜艇自航发射鱼雷的若干问题

潜艇自航发射鱼雷可以降低发射过程的辐射噪声,有利于提高发射艇的安全性。通过分析自航发射需具备的基本条件、现有533mm口径潜艇鱼雷发射管实现自航发射的可能性、后端补水的自航发射、有动力后端补水的自航发射等几个问题,得出了533mm口径的潜艇鱼雷发射管不可能实现自航发射的结论。另外,对降低潜艇发射鱼雷时的出管速度给鱼雷和发射艇带来的风险作了分析,得出了为保证潜艇发射鱼雷时的安全不能随意降低鱼雷出管速度的结论。     

基于罗兰C的广域增强系统地面通信网络设计

研究了罗兰C脉冲内频率调制,理论分析了各调制方式对罗兰C定位接收机的影响及其数据传输率。研究结果表明:我国罗兰C台链通过脉冲频率二阶16级调制能满足WAAS地面通信网络的要求,且该调制方式兼容于定位接收机。