用光纤干涉仪测量压电位相调制器的相移系数

制作了压电位相调制器 ,并利用光纤干涉仪测量了它的相移系数 ,同时对影响它的相移能力的几个因素进行了实验和理论分析 ,为研制干涉型光纤传感器做准备 .     

平板湍流边界层内气泡流流动实验研究

在低湍流度水槽里 ,利用片光源显示了平板气液两相湍流边界层内气泡流的流场结构 ,研究了平板安装位置、来流速度、喷气方式等参数对湍流边界层内气泡流的影响 .利用激光测速技术测量了平板水平放置时气泡流最外缘处的水平速度及厚度 .结果表明 :平板喷气减阻的原因在于喷气改变了平板湍流边界层的流动结构 ,抑制了湍流     

Markovian approximation for manufacturing systems of unreliable machines in tandem

This paper studies production planning of manufacturing systems of unreliable machines in tandem. The manufacturing system considered here produces one type of product. The demand is assumed to be a Poisson process and the processing time for one unit of product in each machine is exponentially distributed. A broken machine is subject to a sequence of repairing processes. The up time and the repairing time in each phase are assumed to be exponentially distributed. We study the manufacturing system by considering each machine as an individual system with stochastic supply and demand. The Markov Modulated Poisson Process (MMPP) is applied to model the process of supply. Numerical examples are given to demonstrate the accuracy of the proposed method. We employ (s, S) policy as production control. Fast algorithms are presented to solve the average running costs of the machine system for a given (s, S) policy and hence the approximated optimal (s, S) policy. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48: 65–78, 2001     

嵌银丝贫氧推进剂燃烧特性

采用试验发动机法 ,对嵌银丝铝镁贫氧推进剂的燃烧特性进行了研究 ,得到了低压下嵌银丝铝镁贫氧推进剂的燃烧规律 ,研究了银丝直径和贫氧推进剂配方对嵌银丝发动机燃速的影响。结果表明 ,嵌银丝贫氧推进剂的燃烧过程由初始工作段、稳定工作段和结束段组成 ;采用较粗的银丝 (0 3mm和0 4mm)可以显著提高贫氧推进剂的燃速 ;提高贫氧推进剂的基础燃速也是提高嵌银丝贫氧推进剂燃速的有效方法之一。     

新型抗冲击、抗爆炸防护结构的研究

海湾战争、科索沃战争和伊拉克战争表明,完善的防护工程体系在高科技局部战争中具有极为重要的作用。针对目前防护工程中存在的一些问题,提出了一种新型抗冲击、抗爆炸防护结构,该防护结构以钢管混凝土短构件为基本构件,通过一定的组合方式组成一种新型的遮弹结构,由于钢管混凝土构件具有承载能力高、抗压强度大尤其是延性好的特性,因此该新型遮弹结构的抗冲击和抗爆炸能力是很强的,非常适宜在防护工程中应用。     

国外先进战斗机电子对抗系统的发展

首先介绍国外F-22和F-35为代表的先进战斗机的电子战系统和其他欧洲先进战斗机的电子战系统等发展情况。对未来战斗机电子战系统的综合特点和基本功能进行了比较详细的分析和描述,最后叙述了未来战斗机的航空电子系统将设计成为一体化共平台,电子战系统与一体化的航空电子系统融合成为一个功能系统,并描述了这种先进的电子战系统的作战能力。     

双总线方式下的串口通信技术

针对军事电子信息系统对网络安全性和可靠性的要求,提出了一种具有双总线结构的互联系统。通过对外总线子系统中串行通信的研究,为外总线子系统中通信的实现提供了有力的保证。     

一种与连续相位调制相适应的信道编码技术

以Rimoldi提出的分解方法为基础,文中介绍了一种与连续相位调制CPM(Continuous PhaseModulation)相适应的环卷积编码技术,该编码与CPM内在编码具有相同的代数结构,文中给出了两者结合后的常用研究方法。通过计算机搜索,以最小欧氏距离最大为目标,得到了一些典型参数下最优的编码方案。仿真结果表明,采用环编码后CPM信号的误比特性能有很大的提升。     

基于相位相关和自适应阈值的图像亚像素配准

针对图像的亚像素配准问题,提出了一种基于相位相关和自适应阈值技术来计算图像间平移参数的方法.先通过传统的相位相关技术得到图像间的整数平移参数,接着引入由整数平移参数自适应确定的阈值来消除相位相关矩阵的主导奇异向量中相应的高频部分,最后使用主导奇异向量剩下的部分来估计非整平移参数.实验结果证实了这一方法具有较高的配准精度和鲁棒性.     

Statistical variability and fragility assessment of ballistic perforation of steel plates for 7.62 mm AP ammunition

The paper describes field test results of 7.62 × 51 mm M61 AP (armour piercing) ammunition fired into mild steel targets at an outdoor range. The targets varied from 10 mm to 32 mm in thickness. The tests recorded penetration depth, probability of perforation (i.e., complete penetration), muzzle and impact velocities, bullet mass, and plate yield strength and hardness. The measured penetration depth exhibited a variability of approximately ±12%. The paper then compared ballistic test results with predictive models of steel penetration depth and thickness to prevent perforation. Statistical parameters were derived for muzzle and impact velocity, bullet mass, plate thickness, plate hardness, and model error. A Monte-Carlo probabilistic analysis was then developed to estimate the probability of plate perforation of 7.62 mm M61 AP ammunition for a range of impact velocities, and for mild steels, and High Hardness Armour (HHA) plates. This perforation fragility analysis considered the random variability of impact velocity, bullet mass, plate thickness, plate hardness, and model error. Such a probabilistic analysis allows for reliability-based design, where, for example, the plate thickness with 95% reliability (i.e. only 1 in 20 shots will penetrate the wall) can be estimated knowing the probabilistic distribution of perforation. Hence, it was found that the plate thickness to ensure a low 5% probability of perforation needs to be 11–15% thicker than required to have a 50/50 chance of perforation for mild steel plates. Plates would need to be 20–30% thicker if probability of perforation is reduced to zero.