关公人物形象的多角度阐释

本文在运用辩证唯物主义和历史唯物主义研究关公人物形象的同时,也用“二律背反”的哲学观点观照他,历史并辩证地剖析了关公思想及行为中均可以论证但又相互背反的三对命题,从而对关公人物形象有了更加立体、丰富的审美剖析,并从哲学的角度提出了关公悲剧诞生的根本原因。     

基于星载干涉仪测向的辐射源定位综合算法

针对卫星多次观测定位点的估计问题,提出一种不依赖于先验知识的定位点综合算法.该算法首先分析了星载干涉仪测向体制的定位精度,并基于此提出利用定位误差协方差矩阵对定位点进行加权综合的方法.仿真实验表明本文方法可以提高定位精度.     

Optimizing fishbone aisles for dual‐command operations in a warehouse

Unit‐load warehouses store and retrieve unit‐loads, typically pallets. When storage and retrieval operations are not coordinated, travel is from a pickup and deposit (P&D) point to a pallet location and back again. In some facilities, workers interleave storage and retrieval operations to form a dual‐command cycle. Two new aisle designs proposed by Gue and Meller (“Improving the unit‐load warehouse.” In Progress in Material Handling Research: 2006. Material Handling Industry of America, Charlotte, NC, 2006) use diagonal aisles to reduce the travel distance to a single pallet location by approximately 10 and 20[percnt] for the two designs, respectively. We develop analytical expressions for travel between pallet locations for one of these—the fishbone design. We then compare fishbone warehouses that have been optimized for dual‐command to traditional warehouses that have been optimized in the same manner, and show that an optimal fishbone design reduces dual‐command travel by 10–15%. © 2009 Wiley Periodicals, Inc. Naval Research Logistics 54: 389–403, 2009     

有线数据通信仿真模块的设计与实现

针对某通信系统中的有线通信模块,采用半实物仿真技术对其进行仿真,论述了基于DSP和USB技术的设计,详细地描述了系统各部分的构成及工作原理,其调制部分通过按位分析数据并控制8253输出不同频率的方波实现;解调部分通过AD采样并由DSP对数据进行信号处理而实现.同时给出硬件接口设计思路和原理图,最后介绍相关软件基本框架.     

Dynamic signatures and their use in comparing the reliability of new and used systems

The signature of a system with independent and identically distributed (i.i.d.) component lifetimes is a vector whose ith element is the probability that the ith component failure is fatal to the system. System signatures have been found to be quite useful tools in the study and comparison of engineered systems. In this article, the theory of system signatures is extended to versions of signatures applicable in dynamic reliability settings. It is shown that, when a working used system is inspected at time t and it is noted that precisely k failures have occurred, the vector s [0,1]^n‐k whose jth element is the probability that the (k + j)th component failure is fatal to the system, for j = 1,2,2026;,n ‐ k, is a distribution‐free measure of the design of the residual system. Next, known representation and preservation theorems for system signatures are generalized to dynamic versions. Two additional applications of dynamic signatures are studied in detail. The well‐known “new better than used” (NBU) property of aging systems is extended to a uniform (UNBU) version, which compares systems when new and when used, conditional on the known number of failures. Sufficient conditions are given for a system to have the UNBU property. The application of dynamic signatures to the engineering practice of “burn‐in” is also treated. Specifically, we consider the comparison of new systems with working used systems burned‐in to a given ordered component failure time. In a reliability economics framework, we illustrate how one might compare a new system to one successfully burned‐in to the kth component failure, and we identify circumstances in which burn‐in is inferior (or is superior) to the fielding of a new system. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009     

低合金船体钢点蚀敏感性的研究

通过极化试验比较了4种含有不同合金元素的低合金钢的点蚀诱发敏感性,并用电子探针对钢中的主要夹杂物及点蚀诱发后的腐蚀形态作了鉴定.结果表明:镍-铬系钢比锰系钢具有更好的耐点蚀性能;点蚀总是从夹杂物与周围钢基体毗邻的界面处开始诱发;含有硫化物的复相夹杂对点蚀的敏感性更强.     

软件可靠性分配的遗传模型研究

对软件可靠性分配的遗传模型进行了研究,结合相关知识缩小了基本遗传算法的搜索区域,比较灵活地处理了非线性约束条件,提高了搜索效率,避免了早熟收敛现象.此外,在基本遗传算法中增加了保优操作,从而能够在理论上保证实现分配的最优化.算例表明,该算法十分有效.     

自适应逆控制FXLMS算法有源噪声控制仿真研究

前馈有源噪声控制方法可在较宽的频带有效,使之获得了广泛的应用.在前馈有源噪声控制中,直接使用传统的FXLMS算法时,由于次级通道传递函数往往是非最小相位系统,导致系统的性能下降.文中提出一种基于非最小相位系统逆控制的自适应前馈有源噪声控制FXLMS算法,用带宽随机噪声信号和实测风机通风管道噪声信号进行仿真实验研究,结果表明,较传统的FXLMS算法有明显的改进.     

Balancing a one‐way corridor capacity and safety‐oriented reliability: A stochastic optimization approach for metro train timetabling

In urban rail transit systems of large cities, the headway and following distance of successive trains have been compressed as much as possible to enhance the corridor capacity to satisfy extremely high passenger demand during peak hours. To prevent train collisions and ensure the safety of trains, a safe following distance of trains must be maintained. However, this requirement is subject to a series of complex factors, such as the uncertain train braking performance, train communication delay, and driver reaction time. In this paper, we propose a unified mathematical framework to analyze the safety‐oriented reliability of metro train timetables with different corridor capacities, that is, the train traffic density, and determine the most reliable train timetable for metro lines in an uncertain environment. By employing a space‐time network representation in the formulations, the reliability‐based train timetabling problem is formulated as a nonlinear stochastic programming model, in which we use 0‐1 variables to denote the time‐dependent velocity and position of all involved trains. Several reformulation techniques are developed to obtain an equivalent mixed integer programming model with quadratic constraints (MIQCP) that can be solved to optimality by some commercial solvers. To improve the computational efficiency of the MIQCP model, we develop a dual decomposition solution framework that decomposes the primal problem into several sets of subproblems by dualizing the coupling constraints across different samples. An exact dynamic programming combined with search space reduction strategies is also developed to solve the exact optimal solutions of these subproblems. Two sets of numerical experiments, which involve a relatively small‐scale case and a real‐world instance based on the operation data of the Beijing subway Changping Line are implemented to verify the effectiveness of the proposed approaches.     

加权模糊C均值聚类算法实现BDS三频组合观测值优选

在对BDS三频载波相位组合观测值进行误差分析的基础上,确定了优选载波相位线性组合系数的筛选标准。针对传统聚类算法在高维多频混合数据集分类中存在的不足,采用一种基于加权的模糊C均值聚类算法,通过对同一维度在不同簇上赋予不同的权重值,对传统遍历搜索法所获得的部分BDS三频载波相位组合观测值进行了优化分类选取,有效解决了传统全球导航卫星系统载波相位观测值选取方法效率低的问题,同时为多系统多频数据组合观测值系数的优化选取提供了一种新的思路。对分类结果进行分析,确定了各类组合观测量的适用范围,并结合实测数据,利用无几何层叠模糊度解算方法对优选组合进行了整周模糊度的解算,结果验证了该方法的可行性。