单脉冲测角在BM突防干扰机上的应用

高分辨雷达(HRR)使用目标HRRP检测目标,由此要求弹道导弹(BM)突防干扰机生成的多假目标信号中包含BM弹头HRRP信息,HRRP长度是HRRP的一个重要特征,需要通过测量雷达观测角计算得到,BM突防干扰机自旋,自身三维姿态难以提取,二维单脉冲测角系统难以应用,一维单脉冲测角系统根据自旋特点,可间断地测得雷达观测角,干扰机和BM弹头运动以及干扰机自旋对测角精度影响较小,间断得到的雷达观测角可以用来计算BM弹头HRRP长度,指出了干扰机章动是影响测角精度的主要因素,最后说明了探讨的方法对目前BM突防干扰机设计具有一定实际工程意义。     

基于中频数字化技术的塔康测角方法研究

随着软件无线电技术的发展,中频数字化技术不断趋于成熟。针对塔康设备传统的模拟式信号处理体制在实现方式及测量精度上的不足,提出了一种基于中频数字化技术的塔康测角方案,主要针对主辅基准定时点的准确选取和包络信号的快速提取进行了研究。最后给出了仿真测试结果,证明了方案的可行性。     

压力喷嘴常温下雾化特性实验研究

为了满足工程中对喷嘴雾化特性测量的高精度、低成本要求,建立了喷嘴雾化特性实验系统,以自来水为雾化工质,对蒸发冷却压力喷嘴在常温、常压下的雾化特性进行了实验研究。用容积法测量了喷嘴的流量,用最小二乘法对测量数据进行回归分析,得到了喷嘴流量、雾化压力和喷孔直径之间的关联式与流量系数;用机器视觉方法测量了喷嘴的雾化锥角与雾滴尺寸,得到了雾化锥角与雾滴尺寸随雾化压力变化的规律。结果表明:随着雾化压力的增大,喷嘴雾化锥角不断增加,雾滴尺寸不断减小;随轴向距离的增大,D0.632、D0.5、D32有不同幅度的增大,而D0.9则基本不变。     

鱼雷最大航向估计在反鱼雷中的应用

在悬浮式深弹反鱼雷时,若只能根据声纳兵的经验估计鱼雷距离,如何正确估计鱼雷航向角范围就成为正确布放悬浮式深弹的关键.从直航雷的相遇三角形和尾流鱼雷命中目标条件出发,推导出鱼雷相对舰艇的正常提前角,从而确定鱼雷在被发现点的最大航向角范围,为正确投放悬浮式深弹提供了理论依据.     

激光照射指示器束散角数字化检测方法研究

激光末端制导武器系统中,激光照射指示器出射激光的束散角是一个重要的参数。介绍了一种出射激光束散角的数字化检测方法。区别于传统的套孔法和反射靶板法,该方法通过CCD采集激光光斑,用质心法确定光斑中心,根据激光能量密度分布确定激光光斑半径,进而计算出待测的激光束散角。     

Effect of change of sand properties on travel distance of ricocheted debris

The debris from exploded buildings can ricochet after colliding with the ground, thus increasing the debris travel distance and danger from any associated impacts or collisions. To reduce this danger, the travel distance of ricocheted debris must be accurately predicted. This study analyzed the change in the travel distance of ricocheted concrete debris relative to changes in the properties of a sand medium. Direct shear tests were conducted to measure the change in internal friction angle as a function of temperature and water content of the sand. Finite element analysis (FEA) was then applied to these variables to predict the speed and angle of the debris after ricochet. The FEA results were compared with results of low-speed ricochet experiments, which employed variable temperature and water content. The travel distance of the debris was calculated using MATLAB, via trajectory equations considering the drag coefficient. As the internal friction angle decreased, the shear stress decreased, leading to deeper penetration of the debris into the sand. As the loss of kinetic energy increased, the velocity and travel distance of the ricocheted debris decreased. Changes in the ricochet velocity and travel distance of the debris, according to changes in the internal friction angle, indicated that the debris was affected by the environment.     

Numerical investigation on free air blast loads generated from center-initiated cylindrical charges with varied aspect ratio in arbitrary orientation

In current guidelines, the free air blast loads (overpressure and impulse) are determined by spherical charges, although most of ordnance devices are more nearly cylindrical than spherical in geometry. This may result in a great underestimation of blast loads in the near field and lead to an unsafe design. However, there is still a lack of systematic quantitative analysis of the blast loads generated from cylindrical charges. In this study, a numerical model is developed by using the hydrocode AUTODYN to investigate the influences of aspect ratio and orientation on the free air blast loads generated from center-initiated cylindrical charges. This is done by examining the pressure contours, the peak overpressures and impulses for various aspect ratios ranged from 1 to 8 and arbitrary orientation monitored along every azimuth angle with an interval of 5°. To characterize the distribution patterns of blast loads, three regions, i.e., the axial region, the vertex region and the radial region are identified, and the propagation of blast waves in each region is analyzed in detail. The complexity of blast loads of cylindrical charges is found to result from the bridge wave and its interaction with primary waves. Several empirical formulas are presented based on curve-fitting the numerical data, including the orientation where the maximum peak overpressure emerges, the critical scaled distance beyond which the charge shape effect could be neglected and blast loads with varied aspect ratio in arbitrary orientation, all of which are useful for blast-resistant design.     

区间正交小波变换域FLP算法及其在捷联寻北中的应用

针对机抖激光陀螺角随机游走和发动机干扰等影响静态捷联寻北精度的问题,提出了一种新的基于区间正交小波变换的前向线性预测算法。该算法利用前向线性预测技术以及区间正交小波变换抑制边界效应的能力,有效地减小了角随机游走和发动机干扰。车载实验证明该算法的有效性。     

低入射余角下雷达地杂波反射率模型

在常用雷达地杂波反射率模型的基础上,综合考虑雷达频率、地形种类和入射余角等对地杂波反射率的影响,建立了一个低入射余角下雷达地杂波反射率模型,并在不同的情况下,该模型与其他常用地杂波反射率模型相比较。结果表明:该雷达地杂波反射率模型更符合实际,进而证明了该模型的有效性和实用性。     

低入射余角下雷达海杂波的建模与仿真

研究了低入射余角下雷达海杂波的建模、仿真算法及实现问题。根据实际背景 ,对实测数据进行深入讨论 ,建立起一个较为准确的海杂波幅度分布模型与功率谱模型 ;针对非相参和相参两种雷达体制 ,分别采用修正的零记忆非线性变换法和球不变随机过程法来实现具有给定相关性的K分布随机数序列的产生 ,并以VisualC + +为平台实现了仿真软件。仿真结果证明了模型和算法的有效性。