Late Medieval Lance Use: Mounted Combat and Martial Arts in Western Europe from the 14th to the 16th Century

Despite the lance’s status and the amount of attention the couched lance has received in historiography, study of its martial art has been neglected. The various lance types and techniques used by western European cavalry have only recently begun to receive scholarly attention. Additionally, Medieval European lance use has too often been studied in isolation, without an adequate understanding of the idiosyncratic and asymmetrical dynamics of mounted combat. Although the charge with the couched lance was a valid tactic, it was only one of many. Light and heavy lances were used in one hand or two to trip, block, unhorse, and wrestle. These techniques were governed by the harsh laws of distance, speed, impact, iron, and asymmetry. By utilizing the surviving Fechtbücher and several Peninsular and Near Eastern sources, a brief foray into the diverse techniques of lance use and their purposes has been attempted here.     

利用过阻尼电路合成高压方波脉冲

在过阻尼RLC电路分时放电的基础上,提出新型高压方波脉冲产生方法。理论分析表明:过阻尼RLC电路产生的双指数电压波与脉冲形成线产生的方形电压波具有类似的上升沿和平顶。电路模拟表明:通过人工过零技术可以对双指数电压波进行截尾,从而形成完整的高压方波脉冲。建立了原理验证性样机,由两组RLC电路构成,每组电路包含一台脉冲电容器和一只三电极场畸变气体开关,两组电路共用一个上升沿调节电感。实验证明:样机可以在电阻负载上输出幅值为17 kV、平顶宽度为330 ns～5.8μs、上升沿为100～350 ns的单极性高压方波脉冲。该方法适应性强,对负载变化不敏感,同时具有良好的可调节性,方波上升沿、平顶宽度连续独立可调。     

利用RLC电路合成高压方波脉冲

基于过阻尼RLC电路分时放电,提出了一种新型高压方波脉冲产生方法。理论分析表明过阻尼RLC电路产生的双指数电压波与PFL产生的方形电压波具有类似的上升沿和平顶。电路模拟表明通过人工过零技术可以对双指数电压波进行截尾,从而形成完整的高压方波脉冲。建立了原理验证性样机,由两组RLC电路构成,每组电路包含一台400 nF脉冲电容器和一只三电极场畸变气体开关,两组电路共用一个上升沿调节电感。实验证明样机可以在250 Ω电阻负载上输出幅值17 kV,平顶宽度330 ns~5.8 μs,上升沿100~ 350 ns 的单极性高压方波脉冲。该方法适应性强,对负载变化不敏感,同时具有良好的可调节性,方波上升沿、平顶宽度连续独立可调。     

新体制导航信号下I/Q幅相不一致对接收机测距零值的影响分析

随着现代化导航信号带宽的增大,由于可以大幅降低采样率,复信号采样的优势日趋明显。由于存在I/Q幅相误差,复信号采样对导航接收机伪距测量造成了一定影响。改进了信道非理想与I/Q幅相误差共同影响BPSK/QPSK信号零值测量的分析模型;在该模型基础上,推导得到了任意I/Q误差和信道非理想特性影响BOC信号伪距零值的模型;探讨了二者在频域抗干扰应用场景下引起的零值变化;理论分析与软件接收机仿真结果高度吻合,误差在1.5×10^-4码片内,证明了分析模型的精确性。该分析方法可用于对高性能导航接收机信道特性进行事先约束及筛选,以确保干扰场景下的零值变化满足要求。     

反电动势对无扰载荷航天器精确定向的影响

无扰载荷航天器中非接触式作动器反电动势会引起有效载荷模块与支持模块之间的耦合,影响有效载荷模块的精确定向性能。通过建立无扰载荷航天器的耦合动力学模型,分析非接触式作动器反电动势对有效载荷模块精确定向性能的影响。考虑六支杆立方构型无扰载荷接口,结合拉格朗日方程和牛顿欧拉方法建立有效载荷模块平台动力学模型。推导非接触式作动器的输出力模型,并引入有效载荷模块平台动力学模型,给出考虑非接触式作动器反电动势的耦合动力学模型。将支持模块上飞轮动静不平衡引起的谐振作为干扰力矩,建立了无扰载荷航天器在轨定向状态的Simulink仿真模型。仿真结果表明,反电动势系数越大,干扰力矩对有效载荷模块的影响越大,有效载荷模块精确定向精度越低。     

Research and development of training pistols for laser shooting simulation system

Firearm shooting simulators are effective means for training the personnel in armed forces, police and shooting athletes. Shooter–weapon is a complex biomechanical system, therefore the best training quality is achieved when the process of a weapon shot is reconstructed in a training simulator and its training weapon mimics the (feeling) perception of the real weapon usage. Dynamics of motions of a handgun simulator held in the hand of a shooter by its grip during the shot is analysed theoretically and experimentally. Breech lock mechanism of the simulator is actuated pneumatically by supplying compressed air in pulses from external pressure source. Analysis of the obtained simulation results and experimentally recorded motion parameters of the training weapon body reveals that application of pneumatic drives is a reasonable option to simulate recoil perception of a pistol.     

Theoretical calculation and experimental study on the interaction mechanism between TKX-50 and AP

The combination of 5,5′-bistetrazole-1,1′-diolate (TKX-50) and ammonium perchlorate (AP) can make greater use of the chemical energy of TKX-50 based energetic materials. The research on the interaction mechanism between TKX-50 and AP is very important for designing TKX-50-AP compounds and judging the formation feasibility of composite particles, which can lay a theoretical foundation for the preparation of TKX-50-AP mixed crystals and the application of TKX-50 in propellant, propellant and explosive. Herein, in order to research the interaction mechanism between TKX-50 and AP, density-functional theory calculation was applied to optimize three configurations of TKX-50-AP compounds. The geometry structure, electrostatic potential and binding energy of the compounds were predicted, and the electronic density topological analysis was also carried out. Then TKX-50-AP mixed crystals structures were constructed, and the radial distribution function of H–O and H–N in mixed crystals was calculated. Finally, solvent/non-solvent method was applied to prepare TKX-50-AP composites, and the infrared spectroscopy and the non-isothermal decomposition performance of the composites were characterized. Results show that the superposition of positive charges in TKX-50 molecule and negative charges in AP makes the electrostatic potential distributions of TKX-50-AP compounds different from that of TKX-50 and AP. The interaction energies of TKX-50-AP 1, TKX-50-AP 2 and TKX-50-AP 3 are 39.743 kJ/mol, 61.206 kJ/mol and 27.702 kJ/mol, respectively. The interaction between TKX-50 molecules and AP molecules in TKX-50-AP mixed crystals both depends on hydrogen bonds and van der Waals force, and the number and strength of hydrogen bonds are significantly greater than that of van der Waals force. The composition of AP and TKX-50 makes the absorption peak of the five-membered rings and NH₃OH⁺ of TKX-50 shift to low wavenumber in the infrared spectroscopy. In general, TKX-50 interacts with AP via hydrogen bonds and van der Waals force, and the calculated results are in good agreement with the experimental results. The composition of TKX-50 and AP can also prolong the decomposition process.     

舰载武器系统零位检测与规正方法

零位检测与规正是作战系统装舰的基础工作,也是武器系统准确打击目标的前提和基础.鉴于传统瞄星方法和标定物标定方法的局限性,以在工程中遇到的特定环境下的武器系统标定为例,分析了具体环境下武器系统零位检测与规正的创新性运用,提出了"线标定法",以为类似情形下的武器系统或作战系统标定提供借鉴.     

多GPU的可压缩湍流并行计算

利用CUDA Fortran语言发展了一种基于GPU的计算流体力学可压缩湍流求解器。该求解器基于结构网格有限体积法,空间离散采用AUSMPW 格式,湍流模型为k-ω SST两方程模型,采用MPI实现并行计算。针对最新的GPU架构,讨论了通量计算的优化方法及GPU计算与PCIe数据传输、MPI通信重叠的多GPU并行算法。进行了超声速进气道及空天飞机等算例的数值模拟以验证GPU在大网格量情况下的加速性能。计算结果表明相对于Intel Xeon E5-2670 CPU单一核心的计算时间,单块NVIDIA GTX Titan Black GPU可获得107至125倍的加速比。利用四块GPU实现了复杂外形1.34亿网格的快速计算,并行效率为91.6%。     

Analysis of the effect of bore centerline on projectile exit conditions in small arms

Most finite element models of small arms focus on an idealized barrel, typically one with a perfectly straight bore centerline. Using five different experimentally measured bore centerlines, this investigation analyzes the effect centerline nonlinearity has on projectile exit conditions. This includes the effect of rotating a centerline through several orientations. Modeled using Abaqus/Explicit, this dynamic analysis simulates a single firing cycle for each centerline. Projectile jump is calculated for each model as a measure of the effects of warped centerlines. The warped centerlines have a small effect on barrel dynamics.