低错误平层数列分割移位LDPC码构造算法研究

为降低LDPC码错误平层,提出一种基于环分类搜索的数列分割移位LDPC码构造算法。该算法具有码长、码率和列重的任意可设性,同时该类码的Tanner图围长至少为8。循环移位因子可以通过简单的代数表达式描述,从而降低内存需求。仿真结果表明,当误码率达到10-5时,数列分割移位LDPC(496,248)码相对于PEG-LDPC码获得了约1.9dB的性能提升;且随着信噪比的升高,两条译码性能曲线之间的差距将更为增大。此外,列重为3的数列分割移位LDPC码(6144,5376)在信噪比4.6dB以后并未出现明显的错误平层。该构造算法与PS-LDPC码相比在误码率达到10-8时大约获得0.25dB增益,特别在错误平层区域其译码性能优于围长为4和6的PEG构造算法,其构造复杂度和耗时也相较于PS-LDPC码和PEG-LDPC码构造算法展现出一定优势。通过基于Tanner图的诱捕集分析方法,统计(496,248)APPS-LDPC码中由8环组成的部分小型诱捕集并不存在,从而证明了其错误平层降低的原因。     

星载SAR天线阵面形变分析与补偿方法

研究了星载SAR天线阵面形变对波束输出的影响及形变补偿方法.针对未来星载SAR将采用的柔性阵面,提出了一种用于星载SAR天线的空间形变实时测量与控制的闭环系统,建立了阵面形变下阵列流形误差模型,得出小幅度形变主要影响波束的旁瓣输出,通过求解补偿形变权值的最小二乘解,使阵列形变补偿后波束输出与期望波束输出最佳逼近,并给出用于阵列误差补偿的阵列形变测量精度要求.仿真结果验证了本文方法结论的正确性与有效性.     

垂直发射低空超低空防空导弹杀伤区近界研究

以低空超低空防空导弹为研究对象,分析了影响其杀伤区近界的主要因素,并针对其采取垂直冷发射的特殊发射方式,应用快速姿态调转的方法,保证了导弹由姿态调转段到制导段的动态误差小。提出了有效的控制方式,进行了大量的典型弹道的数学仿真,从结果来看,这种设计可以将低空超低空防空导弹的杀伤区近界压至接近最小。     

基于遗传算法的航向测量误差分析

提出了一种基于遗传算法的高精度航向测量误差分析的方法,测量模型由2台全站仪组成.通过最佳保留策略和带约束条件的遗传算子,保证该算法具有全局搜索能力.分析结果表明,遗传算法的搜索空间仅为整个搜索空间的0.03%,该模型在现有码头条件下航向测量的精度可达到4″,满足对舰船导航设备高精度航向标校的要求.     

SINS/DR组合导航系统可观测性研究

对SINS/DR组合导航系统的误差方程进行了介绍。将陀螺漂移、加速度计零偏和里程仪刻度系数误差扩展为卡尔曼滤波器的状态,建立了19维状态的组合导航滤波模型。采用分段线性定常系统(PWCS)分析了载车在各个不同运动特性下SINS/DR组合导航系统的可观测矩阵;利用奇异值分解(SVD)分析法定量地分析了SINS/DR导航系统的可观测度。通过系统仿真预测了位置误差、姿态误差和速度误差的滤波效果,仿真结果表明,位置误差、姿态误差和速度误差的估计效果较好。     

Adaptive phasefield modelling of crack propagation in orthotropic functionally graded materials

In this work, we extend the recently proposed adaptive phase field method to model fracture in orthotropic functionally graded materials (FGMs). A recovery type error indicator combined with quadtree decomposition is employed for adaptive mesh refinement. The proposed approach is capable of capturing the fracture process with a localized mesh refinement that provides notable gains in computational efficiency. The implementation is validated against experimental data and other nu-merical experiments on orthotropic materials with different material orientations. The results reveal an increase in the stiffness and the maximum force with increasing material orientation angle. The study is then extended to the analysis of orthotropic FGMs. It is observed that, if the gradation in fracture properties is neglected, the material gradient plays a secondary role, with the fracture behaviour being dominated by the orthotropy of the material. However, when the toughness increases along the crack propagation path, a substantial gain in fracture resistance is observed.     

Cooperative interception with fast multiple model adaptive estimation

For the case that two pursuers intercept an evasive target, the cooperative strategies and state estimation methods taken by pursuers can seriously affect the guidance accuracy for the target, which performs a bang For the case that two pursuers intercept an evasive target, the cooperative strategies and state estimation methods taken by pursuers can seriously affect the guidance accuracy for the target, which performs a bang-bang evasive maneuver with a random switching time. Combined Fast multiple model adaptive estimation (Fast MMAE) algorithm, the cooperative guidance law takes detection configuration affecting the accuracy of interception into consideration. Introduced the detection error model related to the line-of-sight (LOS) separation angle of two interceptors, an optimal cooperative guidance law solving the optimization problem is designed to modulate the LOS separation angle to reduce the estimation error and improve the interception performance. Due to the uncertainty of the target bang-bang maneuver switching time and the effective fitting of its multi-modal motion, Fast MMAE is introduced to identify its maneuver switching time and estimate the acceleration of the target to track and intercept the target accurately. The designed cooperative optimal guidance law with Fast MMAE has better estimation ability and interception performance than the traditional guidance law and estimation method via Monte Carlo simulation.     

基于车载GPS定位的固定目标坐标测量误差分析

通过分析地面移动侦察系统对固定目标进行一次坐标测量时的测量过程,建立了固定目标坐标测量模型。通过对测量过程中误差传递规律的分析,导出了目标坐标测量误差的分布规律。根据坐标测量误差中各组成成分的大小,将测量误差分布规律近似成正态分布,并给出了分布参数的简化计算方法。仿真结果证实了误差分布规律近似及参数计算简化的可行性。     

寻的制导控制系统设计方法探讨

对使用寻的体制探测目标的防空导弹制导控制系统设计方法进行了分析、探讨.设计中主要考虑了天线罩折射误差及去耦系数、有效导航比、稳定回路时间常数、气动力时间常数和遮挡效应的影响;对于低空制导控制系统主要考虑了多路径(镜像干扰)的影响,对布鲁斯特角效应抑制多路径(镜像干扰)的影响进行了分析.     

武装直升机无控武器射击误差源分析

探讨了影响武装直升机无控武器对地射击准确度的因素 ,建立了武装直升机对地射击瞄准方程 ,定量分析了主要误差源对射击准确度的影响 ,得出了必须修正直升机迎角、旋翼下洗气流和平均风对射击准确度影响的结论