镍(Ⅱ)系无机热敏材料的研究

制备出十余种镍(II)系热敏颜料,测定了它们的变色温度(Tc),较系统地研究了颜料组成、基料、填料及环境湿度等因素对变色特性的影响,初步讨论了颜料的变色机理。     

边界润滑膜的微观分析

利用X—射线光电子能谱、扫描电镜等手段对新研制的含S、O、Mo油溶性化合物作为极压剂所形成的边界润滑膜进行了微观分析。结果表明:该极压剂的极压抗磨作用除了与极压剂在摩擦表面上分解,生成具有良好润滑性能的MoS_2、MoO_3、MoO_2等化合物有关外,还与极压剂对摩擦表面有化学抛光作用有关。     

军事物流的若干问题刍议

针对军事物流的特点,本文分析了军事物流中物资储备、仓储管理和技术革新等存在的问题,并提出了相应的发展对策。     

相变温控混凝土相变储热性能试验研究

混凝土中加入相变材料之后对水化反应产生的热量有一定的吸收,从而对混凝土内部温度有一定的控制作用,这将减少混凝土温度裂缝产生的几率.通过筛选带一定结晶水的硬脂酸、月桂酸和正十二醇的3种有机相变材料,模拟实际大体积混凝土工程来研究不同相变材料的掺量、控温效果.运用计算机软件绘制时间一温度曲线,从中搜寻出最佳的相变材料掺量.     

Maximizing deviation method for multiple attribute decision making under q-rung orthopair fuzzy environment

Because of the uncertainty and subjectivity of decision makers in the complex decision-making environment, the evaluation information of alternatives given by decision makers is often fuzzy and uncertain. As a generalization of intuitionistic fuzzy set (IFSs) and Pythagoras fuzzy set (PFSs), q-rung orthopair fuzzy set (q-ROFS) is more suitable for expressing fuzzy and uncertain information. But, in actual multiple attribute decision making (MADM) problems, the weights of DMs and attributes are always completely unknown or partly known, to date, the maximizing deviation method is a good tool to deal with such issues. Thus, combine the q-ROFS and conventional maximizing deviation method, we will study the maximizing deviation method under q-ROFSs and q-RIVOFSs in this paper. Firstly, we briefly introduce the basic concept of q-rung orthopair fuzzy sets (q-ROFSs) and q-rung interval-valued orthopair fuzzy sets (q-RIVOFSs). Then, combine the maximizing deviation method with q-rung orthopair fuzzy information, we establish two new decision making models. On this basis, the proposed models are applied to MADM problems with q-rung orthopair fuzzy information. Compared with existing methods, the effectiveness and superiority of the new model are analyzed. This method can effectively solve the MADM problem whose decision information is represented by q-rung orthopair fuzzy numbers (q-ROFNs) and whose attributes are incomplete.     

Fabrication of AA7005/TiB2-B4C surface composite by friction stir processing: Evaluation of ballistic behaviour

The present work aims to enhance the ballistic resistance of AA7005 alloy by incorporating the TiB₂ and B₄C ceramic reinforcement particles. Surface composites with different weight fractions of TiB₂ and B₄C particles were processed by friction stir processing. Micro-hardness and depth of penetration tests were carried out to evaluate the ballistic properties of the surface composites. The surface hardness of the composite was found to be nearly 70 HV higher than base alloy. The depth of penetration of the steel projectile was 20–26 mm in the composites as compared to 37 mm in the base alloy. Ballistic mass efficiency factor of the surface composite was found to be 1.6 times higher than base alloy. This is mainly attributed to the dispersion strengthening from the reinforcement particles.     

On the roles of free play in army exercises and the Russians

The article outlines the essential role of free play elements in various types of exercises for the development of in-depth and practical military professionalism. It thereafter argues why such use of free play contradicts the military science founded Russian Way of War.     

Effect of wave shaper on reactive materials jet formation and its penetration performance

Wave shaper effect on formation behavior and penetration performance of reactive liner shaped charge (RLSC) are investigated by experiments and simulations. The reactive materials liner with a density of 2.3 g/cm³ is fabricated by cold pressing at a pressure of 300 MPa and sintering at a temperature of 380 °C. Experiments of the RLSC with and without wave shaper against steel plates are carried out at standoffs of 0.5, 1.0, and 1.5 CD (charge diameter), respectively. The experimental results show that the penetration depths and structural damage effects of steel plates decrease with increasing the standoff, while the penetration depths and the damage effects of RLSC without wave shaper are much greater than that with wave shaper at the same standoff. To understand the unusual experimental results, numerical simulations based on AUTODYN-2D code are conducted to discuss the wave shaper effect, including the propagation behavior of detonation wave, the velocity and temperature distribution of reactive jet, and penetration depth of reactive jet. The simulations indicate that, compared with RLSC without wave shaper, there is a higher temperature produced inside reactive jet with wave shaper. This unusual temperature rise effects are likely to be an important mechanism to cause the initiation delay time of reactive jet to decline, which results in significantly decreasing its penetration performance.     

民用建筑外墙保温材料防火对策

分析民用建筑外墙保温材料火灾危险性和在建工程施工现场消防管理存在的问题,讨论了我国建筑外墙保温立法存在的缺失,并提出了针对性的防火对策。