桥丝式电火工品静电感度测试方法研究

本文对目前静电感度试验的现状进行了分析。在理论分析的基础上解决了JGY-50型静电火花感度仪的串联电阻和真空开关所带来的问题。提出了桥丝式电火工品的静电感度测试新方法,通过一个高压线性采样装置直接测量试样在试验过程中的电压、电流曲线,求得试样实际消耗的能量,以此统计试样的静电感度。采用这种方法,测试了JD-11电点火具的50％发火能与放电时间常数的关系,得到了呈单调规律变化的曲线。     

ESD对电点火管安全性的影响研究

简述了真实静电感度测试方法及其数据处理方法,报道了利用该方法测试的两种电点火管DD—4.5、DD—17的静电感度测试结果。确定了其最小静电点火能分别为834μJ和188μJ。依据不同的ESD(静电放电)模型,讨论了不同静电危害源对电点火管直接放电时的最高安全电压值。     

Damage of multi-layer spaced metallic target plates impacted by radial layered PELE

Three different kinds of PELE (the penetrator with lateral efficiency) were launched by ballistic artillery to impact the multi-layer spaced metal target plates. The impact velocities of the projectiles were measured by the velocity measuring system. The damage degree and process of each layer of target plate impacted by the three kinds of projectiles were analyzed. The experimental results show that all the three kinds of projectiles have the effect of expanding holes on the multi-layer spaced metal target plates. For the normal structure PELE(without layered) with tungsten alloy jacket and the radial layered PELE with tungsten alloy jacket, the diameters of holes on the second layer of plates are 3.36 times and 3.76 times of the diameter of the projectile, respectively. For radial layered PELE with W/Zr-based amorphous composite jacket, due to the large number of tungsten wires dispersed after the impact, the diameter of the holes on the four-layer spaced plates can reach 2.4 times, 3.04 times, 5.36 times and 2.68 times of the diameter of the projectile. Besides, the normal structure PELE with tungsten alloy jacket and the radial layered PELE whit tungsten alloy jacket formed a large number of fragments impact marks on the third target plate. Although the number of fragments penetrating the third target plate is not as large as that of the normal structure PELE, the area of dispersion of fragments impact craters on the third target plate is larger by the radial layered PELE. The radial layered PELE with W/Zr-based amorphous composite jacket released a lot of heat energy due to the impact of the matrix material, and formed a large area of ablation marks on the last three target plates.     

Preparation of reduced sensitivity co-crystals of cyclic nitramines using spray flash evaporation

The present day weapon technology demands novel energetic materials that exhibit simultaneous high explosive yield and reduced sensitivity. This article demonstrates application of spray evaporation to prepare reduced sensitive co-crystals of high performance nitramine explosives like HMX and CL-20 with a relatively less insensitive explosive 1,1-diamino-2,2-dinitroethylene or FOX-7. Stronger intermolecular hydrogen bonding in FOX-7 is responsible for limited solubility in most of organic solvents. Large solubility differences of FOX-7 with HMX and CL-20 restricts it's co-crystallization through classical methods that yields thermodynamically favorable product. Spray flash evaporation, a kinetic crystallization method, has been therefore adopted and could successfully produce CL-20/FOX-7 (2:1) and HMX/FOX-7 (4:1) co-crystals. The fine powdered materials obtained were characterized by SEM, powder XRD, Raman spectroscopy, DSC-TGA etc. Multipoint Raman spectra showed consistent occurrence of spectral features indicating stoichiometric co-existence of ingredients in the crystal lattices. DSC analysis showed absence of all thermally assisted solid-solid phase transformation in the co-crystals as they were observed in pristine materials. The thermal stability calculated in terms of activation barrier for decomposition, revealed the CL-20/FOX-7 co-crystal to be intermediately stable on comparison to their constituents while, the HMX/FOX-7 co-crystal is more stable. Compared to pure HMX and CL-20, both the co-crystals have shown higher insensitivity to impact force, suggesting them to be suitable for future generation insensitive munitions.     

内置频率对Duffing振子微弱二进制相移键控信号盲检测影响

采用Duffing振子实现对微弱二进制相移键控（Binary Phase Shift Keying, BPSK）信号的盲检测时,Duffing系统输出的周期态和混沌态转换之间存在过渡带。针对这一问题,推导出过渡带时长和Duffing系统内置频率之间的关系表达式;指出内置频率越高,过渡带时间越短;仿真实验给出时间频率响应曲线。内置频率的提高,会降低系统检测微弱信号的灵敏度。针对这一问题,推导出周期态下Duffing系统输出幅度作为因变量、内置频率作为自变量的表达式;仿真实验给出幅频响应曲线。针对微弱BPSK信号盲检测,建立变尺度方法和检测阵列相结合的基于S变换提取Duffing系统输出幅度包络的微弱BPSK信号盲检测模型,仿真实验验证了模型方法的有效性。     

基于正交实验的弹道导弹射程灵敏度参数分析

传统灵敏度分析方法无法得出弹道导弹射程的高敏感影响因素。针对这一问题,提出利用基于正交试验的灵敏度分析方法,对影响弹道导弹战标的主要参数进行分析。选取射程灵敏度问题,设计了实验方案与分析流程,并依托弹道模型进行了仿真。仿真结果验证了方法的有效性。     

考虑载荷作用次数的多失效模式扭力轴灵敏度分析

机械构件的不同的失效模式之间具有一定的相关性,而且随机载荷作用次数对机械构件的可靠性有一定程度的影响。因此对机械构件进行可靠性灵敏度分析时,需要充分考虑其不同失效模式和载荷作用次数的影响。通过运用顺序统计量理论考虑载荷多次作用以及多种失效模式条件下机械构件可靠性及可靠性灵敏度的变化规律,运用随机摄动理论和四阶矩技术,建立一种考虑载荷作用次数的多失效模式机械构件可靠性灵敏度分析数值方法的应力强度干涉模型。在随机变量前四阶矩已知的情况下,结合灵敏度分析的梯度算法,推导出关于随机变量均值和方差的灵敏度计算公式。以某履带车辆底盘扭力轴为例进行计算,得到其可靠度随载荷作用次数、随机变量均值和方差而改变的可靠性灵敏度变化曲线,为扭力轴的可靠性优化提供一定的理论依据。研究成果可以推广到相关机械可靠性灵敏度设计和结构优化领域,具有非常重要的实用意义。     

基于敏感性分析和准稳态假设简化详细反应机理

发展了一套基于敏感性分析和准稳态假设来简化复杂化学动力学机理系统的方法。采用等压均相反应器燃烧模型和详细化学动力学机理计算特定工况下的自燃过程。通过对详细机理计算结果的敏感性分析后删除其中的冗余组分和冗余反应,简化得到基干反应模型。再找出基干机理中反应速率较快,浓度较低的组分假定为稳态组分,使用准稳态假设方法简化得到总包反应模型。最后以甲烷燃烧的GriMech1.2详细机理为例分析得到了简化机理并计算了着火延迟时间,与详细机理所得的结果进行比较验证,得到了较好的结果。     

装备性能影响舰艇作战能力的敏感性研究

首先给出了基于效用函数的舰载武器系统作战能力评估模型,以便在装备性能与舰艇作战能力之间建立联系,在此基础上对部分装备的性能变化影响舰艇作战能力的敏感性进行了分析.     

气控软体驱动器结构分析与优化设计

气控软体驱动器的结构特性对其运动和力学特性影响显著,目前气控软体驱动器支反力和倾角性能亟须提升.基于ABAQUS提供的脚本接口,采用Python语言开发脚本建立气控软体驱动器参数化仿真模型,将尺寸因子作为优化变量,联立Isight和ABAQUS,采用单因子试验方法确定倾角和支反力两个目标量的高敏感性影响因子.运用归一化...