燃烧加热型煤油加热器工作特性试验

针对冲压发动机地面试验应用需求,设计了基于燃气加热方式的煤油加热器,通过试验的方法研究了多个因素对其工作特性的影响规律。研究结果表明,该煤油加热器加热能力强,响应时间短,可在线制备超临界/裂解态煤油;其中,燃气温度、流量和煤油流量是影响煤油加热器工作特性的主要因素,通过控制燃气温度和流量可以大范围调节煤油温度,能满足冲压发动机不同试验工况的应用需求。     

液体火箭发动机功率平衡通用计算方法

本文提出了一种新的液体火箭发动机功率平衡通用计算方法。该方法按照预定的计算顺序，对发动机系统的各个部件进行迭代计算，采用拟牛顿法求解系统可调变量。该方法对各种发动机系统方案的分析具有通用性，适用于液体火箭发动机系统循环方案论证。该方法已在计算机上采用面向对象程序设计实现。本文给出了用该程序对采用液氧、丙烷作为推进剂的分级燃烧循环进行计算的结果。     

Experimental research on the instability propagation characteristics of liquid kerosene rotating detonation wave

In order to study the instability propagation characteristics of the liquid kerosene rotating detonation wave (RDW), a series of experimental tests were carried out on the rotating detonation combustor (RDC) with air-heater. The fuel and oxidizer are room-temperature liquid kerosene and preheated oxygen-enriched air, respectively. The experimental tests keep the equivalence ratio of 0.81 and the oxygen mass fraction of 35% unchanged, and the total mass flow rate is maintained at about 1000 g/s, changing the total temperature of the oxygen-enriched air from 620 K to 860 K. Three different types of instability were observed in the experiments: temporal and spatial instability, mode transition and re-initiation. The interaction between RDW and supply plenum may be the main reason for the fluctuations of detonation wave velocity and pressure peaks with time. Moreover, the inconsistent mixing of fuel and oxidizer at different circumferential positions is related to RDW oscillate spatially. The phenomenon of single-double-single wave transition is analyzed. During the transition, the initial RDW weakens until disappears, and the compression wave strengthens until it becomes a new RDW and propagates steadily. The increased deflagration between the detonation products and the fresh gas layer caused by excessively high temperature is one of the reasons for the RDC quenching and re-initiation.     

Experimental study on the cavity evolution and liquid spurt of hydrodynamic ram

In research of the characteristics of the cavity evolution, the pressure, and the liquid spurt in hydrodynamic ram, the experiment of the high-velocity fragment impacting the water-filled container had been conducted. The relationships between the above three characteristics have been researched. The evolution of the cavity can be divided into three processes according to its shape characteristics. The first liquid spurt occurred in Process Ⅱ and the rest of it occurred in Process Ⅲ. The duration of the second liquid spurt is longer than the first liquid spurt. When the impact velocity of the fragment is less than 996 m/s, the velocity of the second liquid spurt is the highest. When the velocity of the fragment is greater than 996 m/s, the velocity of the first liquid spurt is the highest. The maximum velocities of the first and second liquid spurt are 111 m/s and 94 m/s respectively. The pressure fluctuated sharply in Processes Ⅰ and Ⅲ. The maximum peak pressures in the shock and the cavity oscillation phases are 15.51 MPa and 7.96 MPa respectively. The time interval of the two adjacent pressure pulses increases with the increase of the fragment velocity.     

考虑入口和出口容积效应的涡轮动力学模型

建立了考虑涡轮入口和出口容积效应的涡轮动力学模型 ,利用该模型计算了燃气涡轮气瓶启动的动态响应过程 ,分析了影响涡轮动态特性的主要因素。计算结果表明 :涡轮前容积对涡轮入口压力和出口背压的过渡过程均有显著的影响 ,涡轮后容积对涡轮入口压力的过渡过程影响不大 ,对涡轮出口背压的影响显著。     

流量连续可调火箭发动机极度富燃燃烧特性

以气氧/煤油作为推进剂对火箭发动机进行流量连续调节试验,研究火箭发动机连续变工况过程中的燃烧特性。火箭发动机通过可调气蚀文氏管连续调节煤油流量。试验在富燃工况(混合比0.405~0.690)下成功点火,并实现了混合比、燃气总流量连续调节。试验发现流量连续调节过程中,当混合比小于0.535时,燃烧室压力随煤油流量减小而增大;当混合比大于0.535时,燃烧室压力随煤油流量减小而减小。同时,特征速度和燃烧效率随混合比增大而增大,并且混合比小于0.535时特征速度、燃烧效率增大的速率大于混合比大于0.535时的速率。研究表明推进剂流量与燃烧效率同时影响燃烧室压力。当混合比小于0.535时,燃烧效率的影响占优;混合比大于0.535时,推进剂流量影响占优。     

空气/煤油/水燃气发生器点火特性试验研究

燃气发生器是超燃冲压发动机地面试验系统中的关键设备,为提高系统安全性和经济性设计了空气/煤油/水燃气发生器,在富燃状态下进行了一系列点火试验,试验结果表明：该型燃气发生器,实现可靠点火的余氧系数下限为0.51;水的加入使得化学反应速率和火焰传播速度降低,燃气发生器点火和火焰稳定困难,提高余氧系数可以提高点火可靠性。同时水的加入容易引起燃烧不稳定,通过提高余氧系数可消除低频不稳定燃烧。     

The mechanism of liquid dispersing from a cylinder driven by central dynamic shock loading

A systematic investigation on the mechanism of dynamic liquid dispersing process via theoretical and experimental approach is presented. The experiments include weak and strong constrained scenarios using the high-speed camera technique and the flash X-ray radiography technique. Based on dynamic analysis, one-dimensional characteristics analysis and some numerical simulations on the propagating processes of blast waves before the container shell rupturing, further and detailed analyses of the experimental results are presented. The effects of the liquid viscosity on the dynamic dispersing flow are also analyzed, and the spall fracture mechanism is explored. Thus, the dominating forces determining the dispersing liquid flow are revealed, that is, the stretching and shearing action due to the interaction of two reflecting rarefaction waves in opposite propagating directions. The influence of container shell strength on the dispersing liquid flow is also investigated, and the characters of cavitation layered in liquid before shell rupturing are uncovered. Results revealed that different shell material results in different cavitating layers. Then the different cavitating layers drive the different dynamic liquid dispersing process coming into being. The metastable liquid states caused by pressure drop and cavi-tation generation are discussed.     

液体火箭发动机烧蚀冷却推力室室壁温度响应的计算

本文对液体火箭发动机烧蚀冷却推力室的冷却机理进行了分析,较为全面地考虑了影响温度场的主要因素,利用六点中心差分建立了离散数学模型,并对室壁温度响应进行了计算,得到了烧蚀速率和侵蚀速率等。所得结果可供设计推力室时参考。     

液氢液氧火箭发动机稳态数值仿真与故障分析

根据发动机工作的物理过程建立了大型液氢液氧火箭发动机稳态故障的数学模型,数学模型包含了70个工作参数和45个干扰因素,采用了布罗伊登法求解。确立了各种故障的正确仿真机制,对计算结果进行了分析,并与试车结果相比较,吻合良好。