一种信号检测模糊技术及其应用

本文基于模糊理论,建立一种信号检测的模糊模型,并实际运用于连续波多普勒测速雷达目标速度的提取,取得了满意的结果     

高速水射流倒空弹体装药安全性研究

本文阐述了高速水射流倒空弹体装药的机理,建立了确定水射流引爆炸药的临界速度的模拟实验方法和模型,进行了高速水射流冲击炸药的安全性试验,并对试验结果进行了分析,证明在工作泵压下高速水射流倒空弹体装药安全、可靠。     

智能化转速测试系统的原理及设计

本文在收集众多的转速测量方案的基础上,提出由光电反射式传感器或霍尔传感器与8098单片机构成一套可在坦克上应用的智能化转速测试系统,并进行了电路硬件设计和软件编制.     

BDS在低轨卫星编队高精度相对轨道确定上的应用分析

分析基于北斗卫星导航系统(BeiDou satellite navigation System, BDS)的低轨卫星编队相对轨道确定问题,但由于缺乏实测数据,通过仿真实验展开研究。结果表明,500 km空域平均可视BDS卫星数约为9.7,由于地球静止轨道(GeoStationary earth Orbit,GEO)卫星和倾斜地球同步轨道(Inclined GeoSynchronous earth Orbit,IGSO)卫星的存在,亚太地区的可视BDS卫星数明显偏多。仅考虑观测噪声的影响时,基于BDS的相对定轨精度可达0.74 mm,加入星历误差的影响,对近距离编队系统的相对定轨而言,GEO卫星数米的星历误差可以忽略,但当星间距离增大到约200 km时,GEO卫星单差后的星历误差可达厘米量级,GEO+IGSO+中圆地球轨道(Medium Earth Orbit,MEO)卫星和IGSO+MEO卫星求解的相对轨道精度分别为1.09 mm和0.96 mm,GEO卫星的加入使得精度下降了13.54%。在其余误差得到有效处理后,BDS的相对定轨精度可达亚毫米量级,且无明显区域差异,GEO卫星和IGSO卫星能提高近距离编队系统的全球相对定轨精度,未来BDS将广泛应用于低轨卫星编队相对轨道确定。     

Interface defeat studies of long-rod projectile impacting on ceramic targets

The interface defeat phenomenon always occurs when a long-rod projectile impacting on the ceramic target with certain velocity, i.e., the projectile is forced to flow radially on the surface of ceramic plates for a period of time without significant penetration. Interface defeat has a direct effect upon the ballistic performance of the armor piercing projectile, which is studied numerically and theoretically at present. Firstly, by modeling the projectiles and ceramic targets with the SPH (Smoothed Particle Hydrodynamics) particles and Lagrange finite elements, the systematic numerical simulations on interface defeat are performed with the commercial finite element program AUTODYN. Three different responses, i.e., complete interface defeat, dwell and direct penetration, are reproduced in different types of ceramic targets (bare, buffered, radially confined and oblique). Furthermore, by adopting the validated numerical algorithms, constitutive models and the corresponding material parameters, the influences of projectile (material, diameter, nose shape), constitutive models of ceramic (JH-1 and JH-2 models), buffer and cover plate (thickness, constraints, material), as well as the prestress acted on the target (radial and hydrostatic) on the interface defeat (transition velocity and dwell time) are systematically investigated. Finally, based on the energy conservation approach and taking the strain rate effect of ceramic material into account, a modified model for predicting the upper limit of transition velocity is proposed and validated. The present work and derived conclusions can provide helpful reference for the design and optimization of both the long-rod projectile and ceramic armor.     

An investigation on anti-impact and penetration performance of basalt fiber composites with different weave and lay-up modes

The woven basalt fiber composites (WBFC) and the unidirectional [0°/90°/45°/-45°]_s basalt fiber composites (UBFC) were prepared by hot-pressing. Three-point bending test, low velocity impact test, and ballistic test were performed to the prepared composites. After the tests, the specimens were recovered and analyzed for micromorphology. Three-point bending tests show that both the bending strength and stiffness of the WBFC surpass those of the UBFC. Low velocity impact test results show that the low velocity impact resistance to hemispherical impactor of the UBFC is higher than that of the WBFC, but the low velocity impact resistance to sharp impactor of the UBFC is lower than that of the WBFC. For the ballistic test, it can be found that the ballistic property of the UBFC is higher than that of the WBFC. After the tests, microscopic analysis of the specimens was applied, and their failure mechanism was discussed. The main failure modes of the UBFC are delamination and fibers breakage under the above loading conditions while the main failure mode of the WBFC is fibers breakage. Although delamination damage can be found in the WBFC under the above loading conditions, the degree of delamination is far less than that of the UBFC.     

横向效应增强型弹垂直侵彻薄靶的轴向剩余速度理论分析

为了得到横向效应增强型弹（Penetration with Enhanced Lateral Efficiency projectile, PELE）对金属薄靶垂直侵彻后的弹体轴向剩余速度,运用平面冲击波理论,对PELE的侵彻机理进行分析。参照平头弹体对靶板的侵彻模型,将PELE侵彻过程中的能量损失划分为以下几个部分：外壳体和内芯撞靶区域对应的环形塞块获得的能量、冲击波作用下弹体的内能增量以及剪切耗能等。然后根据能量守恒原理,得到PELE垂直侵彻金属薄靶后的PELE弹体轴向剩余速度的理论模型。为了验证该模型的合理性和准确性,设计相应的试验进行验证。结果表明,不同条件下得到的试验结果和理论模型得到的计算结果均吻合得较好。因此,得到的PELE垂直侵彻薄靶的轴向剩余速度理论模型可为工程应用提供指导和参考。     

稀薄气体动理论中介观尺度数值模拟的加速方法

针对滑移流、早期过渡流区域采用离散速度法(discrete velocity method, DVM)求解Boltzmann方程收敛速度极慢、计算资源消耗大的难题,提出全流场耦合介观/宏观方程加速方法。在介观层面基于有限差分的DVM求解Boltzmann方程,在宏观层面基于有限体积的压力耦合方程组半隐式方法求解矩方程,充分利用纳维-斯托克斯-傅里叶/R26矩方程在低克努森数下的快速收敛特性,对介观方程进行加速。基于高阶Hermite多项式重构分布函数,完成宏观方程与介观方程之间的数据传输。仿真结果表明:全流场耦合介观/宏观方程的加速方法在滑移流、早期过渡流区域具有显著加速性能,最大降低了95.28%的计算时长;但对中、大克努森数流域,加速性能大幅度下降。     

基于ANSYS／LS—DYNA的电子装备爆炸冲击振动损伤建模研究

针对电子装备爆炸冲击振动损伤问题,设计了损伤模拟的基本方案;采用ANSYS／LS—DYNA建立了二维“爆炸源-地面-弹性体-电子装备”模型;通过模型试验,获得了与实际爆炸冲击振动特性相吻合的加速度、位移和应力等数据。     

弹丸速度的数字化激光幕测试技术

针对传统弹丸速度测量方法的局限,提出一种新的弹丸速度测试技术——数字化激光幕结合互相关速度测量算法的测试技术,并给出了激光总体测速方案、测速原理以及互相关测速方法,经靶场试验验证测试效果良好。