次连续(S)型映射的广义拓扑度

基于Galerkin逼近技巧,本文构造了次连续(S)型映射的广义度,讨论了该广义度的初等性质,并给出了局部有界广义伪单调映射满值性的拓扑证明。     

聚能射流形成过程的理论建模与分析

分析了聚能射流的形成过程,并对其中的各阶段进行了详细建模。在模型中考虑了炸药爆轰、金属的驱动、药型罩压垮以及射流和杵体的形成过程。采用该模型对某一聚能装药结构进行了计算,计算结果表明:药型罩顶部和底部微元的压垮速度较小,在射流头部形成反向速度梯度,与试验数据吻合较好。该模型对于多级侵彻战斗部的工程设计与侵彻参数的计算具有一定的参考价值。     

Energy‐efficient scheduling for sustainable manufacturing systems with renewable energy resources

Environmentally friendly energy resources open a new opportunity to tackle the problem of energy security and climate change arising from wide use of fossil fuels. This paper focuses on optimizing the allocation of the energy generated by the renewable energy system to minimize the total electricity cost for sustainable manufacturing systems under time‐of‐use tariff by clipping the peak demand. A rolling horizon approach is adopted to handle the uncertainty caused by the weather change. A nonlinear mathematical programming model is established for each decision epoch based on the predicted energy generation and the probability distribution of power demand in the manufacturing plant. The objective function of the model is shown to be convex, Lipchitz‐continuous, and subdifferentiable. A generalized benders decomposition method based on the primal‐dual subgradient descent algorithm is proposed to solve the model. A series of numerical experiments is conducted to show the effectiveness of the solution approach and the significant benefits of using the renewable energy resources.     

Optimal allocation of minimal repairs in parallel and series systems

In reliability engineering, the concept of minimal repair describes that the repair brings the failed unit (eg, system or component) to the situation which is same as it was just before the failure. With the help of the well‐known Gamma‐Poisson relationship, this paper investigates optimal allocation strategies of minimal repairs for parallel and series systems through implementing stochastic comparisons of various allocation policies in terms of the hazard rate, the reversed hazard rate, and the likelihood ratio orderings. Numerical examples are presented to illustrate these findings as well. These results not only strengthen and generalize some known ones in the seminal work of Shaked and Shanthikumar, but also solve the open problems proposed by Chahkandi et al.'s study and Arriaza et al.'s study.     

Single‐machine scheduling with deadlines to minimize the total weighted late work

We consider scheduling a set of jobs with deadlines to minimize the total weighted late work on a single machine, where the late work of a job is the amount of processing of the job that is scheduled after its due date and before its deadline. This is the first study on scheduling with the late work criterion under the deadline restriction. In this paper, we show that (i) the problem is unary NP‐hard even if all the jobs have a unit weight, (ii) the problem is binary NP‐hard and admits a pseudo‐polynomial‐time algorithm and a fully polynomial‐time approximation scheme if all the jobs have a common due date, and (iii) some special cases of the problem are polynomially solvable.     

Oligopolistic contracting: Channel coordination under competition

We study contracts between a single retailer and multiple suppliers of two substitutable products, where suppliers have fixed capacities and present the retailer cost contracts for their supplies. After observing the contracts, the retailer decides how much capacity to purchase from each supplier, to maximize profits from the purchased capacity from the suppliers plus his possessed inventory (endowment). This is modeled as a noncooperative, nonzero‐sum game, where suppliers, or principals, move simultaneously as leaders and the retailer, the common agent, is the sole follower. We are interested in the form of the contracts in equilibrium, their effect on the total supply chain profit, and how the profit is split between the suppliers and the retailer. Under mild assumptions, we characterize the set of all equilibrium contracts and discuss all‐unit and marginal‐unit quantity discounts as special cases. We also show that the supply chain is coordinated in equilibrium with a unique profit split between the retailer and the suppliers. Each supplier's profit is equal to the marginal contribution of her capacity to supply chain profits in equilibrium. The retailer's profit is equal to the total revenue collected from the market minus the payments to the suppliers and the associated sales costs.     

卫星导航信号无模糊抗多径码相关参考波形设计技术

针对目前卫星导航接收机码环多径抑制技术在二进制偏移副载波类信号下鉴别曲线可能出现多个稳定跟踪位置,导致接收机存在伪距测量的系统性误差的问题,提出最优鉴别曲线设计技术,采用奇异值优化的最小二乘方法,设计无多余跟踪点的本地码相关参考波形。从多径误差包络和跟踪精度两方面,对基于最优鉴别曲线的二进制偏移副载波信号码相关参考波形的设计性能进行验证评估。仿真结果表明：该方法可实现二进制偏移副载波信号在有限接收带宽下的无模糊鉴别曲线设计。以前端带宽为8.184 MHz时的BOC(1,1)信号为例,设计的码相关参考波形相比W2波形,多径误差包络面积增加了61.8%,而跟踪精度提高了4~5 dB。     

内置频率对Duffing振子微弱二进制相移键控信号盲检测影响

采用Duffing振子实现对微弱二进制相移键控（Binary Phase Shift Keying, BPSK）信号的盲检测时,Duffing系统输出的周期态和混沌态转换之间存在过渡带。针对这一问题,推导出过渡带时长和Duffing系统内置频率之间的关系表达式;指出内置频率越高,过渡带时间越短;仿真实验给出时间频率响应曲线。内置频率的提高,会降低系统检测微弱信号的灵敏度。针对这一问题,推导出周期态下Duffing系统输出幅度作为因变量、内置频率作为自变量的表达式;仿真实验给出幅频响应曲线。针对微弱BPSK信号盲检测,建立变尺度方法和检测阵列相结合的基于S变换提取Duffing系统输出幅度包络的微弱BPSK信号盲检测模型,仿真实验验证了模型方法的有效性。     

装备交互式维修支持系统在基层级维修中的应用研究

阐述了装备交互式维修支持系统的原理和创作过程,以及在基层级维修工作中的应用,研究成果可近一步提高基层级装备维修保障能力。     

发变电所传导干扰分析与抑制措施的研究

通过对发变电所由开关操作在二次系统和低压交流电源系统传导测量结果的分析,确定变电站低压交流电源中传导干扰的特征,利用安捷伦（Agilent）矢量网络分析仪,研究几种典型电源滤波器的插入损耗和特性阻抗等频率特性,应用夏弗纳（Schaffner）等系列抗扰度试验设备,研究电源滤波器对电快速瞬变脉冲群和衰减振荡波的滤波和抑制效果,给出了变电站电源滤波器的滤波特性要求。