舰空导弹综合试验与鉴定方法

从综合试验与鉴定的思路出发 ,针对舰空导弹的战术技术特点 ,建立了鉴定指标体系 ,论述了各种性能的综合试验与鉴定方法 ,并提出了需要研究的关键技术。     

基于网络和主机相结合的入侵检测技术

首先介绍了基于主机和基于网络的两种入侵检测系统的功能原理 ,在分析这两种系统功能原理的基础上 ,提出了基于网络和主机相结合入侵检测系统的工作流程和工作原理 ,进而阐明了当系统检测到有入侵情况下的应对措施 ,采用人工神经网络的入侵检测算法 ,提高了对入侵类型的判别能力 ,保证应对措施的正确 ,确保了系统的安全性。     

A computation procedure for the exact solution of location-allocation problems with rectangular distances

A method is presented to locate and allocate p new facilities in relation to n existing facilities. Each of the n existing facilities has a requirement flow which must be supplied by the new facilities. Rectangular distances are assumed to exist between all facilities. The algorithm proceeds in two stages. In the first stage a set of all possible optimal new facility locations is determined by a set reduction algorithm. The resultant problem is shown to be equivalent to finding the p-median of a weighted connected graph. In the second stage the optimal locations and allocations are obtained by using a technique for solving the p-median problem.     

美军作战试验与鉴定发展研究

当前,军队装备试验鉴定正由性能试验向作战试验、在役考核全领域拓展。在装备试验鉴定体系全面重塑的历史背景下,为适应军队装备试验鉴定发展新变化,探索装备试验鉴定新理论,推进装备试验鉴定自主创新发展,亟需开展装备试验鉴定技术研究。美军相对较早开展了装备试验与鉴定工作,在作战试验与鉴定工作方面已形成了较完善的法规制度体系和规范的操作流程,有较成熟的理论与方法成果可供借鉴。与此同时,美军作战试验与鉴定工作也面临许多新问题。本文剖析了美军作战试验与鉴定的内涵和管理模式,研究了2018和2019年美军作战试验与鉴定的重点技术领域,并进行了对比分析,以期掌握近期美军作战试验与鉴定工作的发展变化。     

美国陆军网络装备作战评估及启示

作战试验能有效地推动装备体系的建设发展,本文通过分析美国陆军网络集成评估与联合作战评估的作战试验特点,提出军队开展装备作战试验的几个建议。首先,总结了美国陆军网络集成评估到联合作战评估的发展演变,主要包括网络集成评估的地位和作用、网络集成评估的实施流程以及13次网络集成评估和3次作战评估的有关情况;其次,分析了网络集成评估的一系列作战试验特点,诸如实际作战需求牵引、逼真场景构建、试训一体化模式、部队战斗力的直接生成以及作战能力的军民融合式发展等;最后,提出了网络集成评估带来的若干启示,从满足实战能力需求开展作战试验、突出装备体系的互操作能力评估、探索试训结合的作战试验模式、组建专门的作战试验部队及鼓励工业部门参与作战试验等方面推动军队作战试验的发展。     

An investigation on anti-impact and penetration performance of basalt fiber composites with different weave and lay-up modes

The woven basalt fiber composites (WBFC) and the unidirectional [0°/90°/45°/-45°]_s basalt fiber composites (UBFC) were prepared by hot-pressing. Three-point bending test, low velocity impact test, and ballistic test were performed to the prepared composites. After the tests, the specimens were recovered and analyzed for micromorphology. Three-point bending tests show that both the bending strength and stiffness of the WBFC surpass those of the UBFC. Low velocity impact test results show that the low velocity impact resistance to hemispherical impactor of the UBFC is higher than that of the WBFC, but the low velocity impact resistance to sharp impactor of the UBFC is lower than that of the WBFC. For the ballistic test, it can be found that the ballistic property of the UBFC is higher than that of the WBFC. After the tests, microscopic analysis of the specimens was applied, and their failure mechanism was discussed. The main failure modes of the UBFC are delamination and fibers breakage under the above loading conditions while the main failure mode of the WBFC is fibers breakage. Although delamination damage can be found in the WBFC under the above loading conditions, the degree of delamination is far less than that of the UBFC.     

维修性增长趋势检验研究

对即时改进和延缓改进两种维修性增长规划方式进行了趋势检验研究.针对即时改进的维修性增长规划方式,提出了趋势检验的图示法和Laplace方法.针对延缓改进的维修性增长规划方式,根据修复率(第i阶段的修复率为μi)的顺序约束条件:∞>μm≥…≥μi≥…≥μ2≥μ1>0,探讨了指数分布和正态分布维修性增长趋势检验的区间估计法,并结合数值例说明了这些方法的可行性.     

C~4ISR系统仿真测试研究

针对一种C4ISR系统在测试时的特点,提出了模拟仿真测试的方案,建立了仿真装备与指挥系统的交互模型,设计了交互对象的自动匹配算法,并在实际系统的仿真测试中得到应用和验证。     

改进的Euler方法应用于非线性方程求根

本文通过引入动力系统,将改进的Euler方法应用于非线性方程求根问题,给出非线性方程求根的预估-再校正迭代格式,证明了该格式至少二阶收敛并可以调节参数达到超收敛。最后给出数值实验,数值结果验证了算法的有效性。     

基于ATS结构的某型导弹发控设备单板测试系统

为了解决某型导弹测控设备的单板检测问题,基于通用ATS平台,针对某型导弹发控设备的电路板测试原理进行了电路仿真,确定了测试策略,开发了检测适配器与软件,并完成了测试验证。