复合材料圆锥壳稳定性分析的传递函数法

基于线弹性小变形理论， 利用Ｆｏｕｒｉｅｒ级数展开、Ｌａｐｌａｃｅ 变换和摄动方法， 建立了复合材料薄壁圆锥壳的静力响应、频率响应、自由振动与屈曲特征值问题的渐近传递函数解。构造了复杂边界条件、中间带支撑、变锥度及阶梯变厚度圆锥壳的传递函数解。数值计算结果表明该方法具有很高的计算精度。     

Value management of diagnostic equipment with cancelation,no‐show,and emergency patients

Magnetic resonance imaging and other multifunctional diagnostic facilities, which are considered as scarce resources of hospitals, typically provide services to patients with different medical needs. This article examines the admission policies during the appointment management of such facilities. We consider two categories of patients: regular patients who are scheduled in advance through an appointment system and emergency patients with randomly generated demands during the workday that must be served as soon as possible. According to the actual medical needs of patients, regular patients are segmented into multiple classes with different cancelation rates, no‐show probabilities, unit value contributions, and average service times. Management makes admission decisions on whether or not to accept a service request from a regular patient during the booking horizon to improve the overall value that could be generated during the workday. The decisions should be made by considering the cancelation and no‐show behavior of booked patients as well as the emergency patients that would have to be served because any overtime service would lead to higher costs. We studied the optimal admission decision using a continuous‐time discrete‐state dynamic programming model. Identifying an optimal policy for this discrete model is analytically intractable and numerically inefficient because the state is multidimensional and infinite. We propose to study a deterministic counterpart of the problem (i.e., the fluid control problem) and to develop a time‐based fluid policy that is shown to be asymptotically optimal for large‐scale problems. Furthermore, we propose to adopt a mixed fluid policy that is developed based on the information obtained from the fluid control problem. Numerical experiments demonstrate that this improved policy works effectively for small‐scale problems. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 287–304, 2016     

目标宽频带RCS的快速算法研究

目标宽带RCS预估算法一直是计算电磁学的一个研究热点,本文分别研究了渐近波形估计技术（AWE）与最佳一致逼近技术在宽频带RCS预估领域内的应用。首先,介绍了传统矩量法计算RCS的原理,并分析了两种快速算法的计算过程。然后,采用这两种技术,分别计算了简易飞机模型的RCS值,并对这两种方法进行比较。计算结果表明相比传统的矩量法,这两种方法在不影响精度的前提下大大提高了计算效率。同时,相比渐近波形估计技术,最佳一致逼近技术在节省内存,节约时间方面更具优势。最后,采用最佳一致逼近理论,结合电磁计算软件,实现较大尺寸目标的宽频带RCS的计算。     

Scheduling a production–distribution system to optimize the tradeoff between delivery tardiness and distribution cost

We consider a make‐to‐order production–distribution system with one supplier and one or more customers. A set of orders with due dates needs to be processed by the supplier and delivered to the customers upon completion. The supplier can process one order at a time without preemption. Each customer is at a distinct location and only orders from the same customer can be batched together for delivery. Each delivery shipment has a capacity limit and incurs a distribution cost. The problem is to find a joint schedule of order processing at the supplier and order delivery from the supplier to the customers that optimizes an objective function involving the maximum delivery tardiness and the total distribution cost. We first study the solvability of various cases of the problem by either providing an efficient algorithm or proving the intractability of the problem. We then develop a fast heuristic for the general problem. We show that the heuristic is asymptotically optimal as the number of orders goes to infinity. We also evaluate the performance of the heuristic computationally by using lower bounds obtained by a column generation approach. Our results indicate that the heuristic is capable of generating near optimal solutions quickly. Finally, we study the value of production–distribution integration by comparing our integrated approach with two sequential approaches where scheduling decisions for order processing are made first, followed by order delivery decisions, with no or only partial integration of the two decisions. We show that in many cases, the integrated approach performs significantly better than the sequential approaches. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005     

具有坐标耦合和处理时滞的二阶离散多智能体系统的一致性

根据系统的拓扑结构、离散步长和旋转矩阵的旋转角,确定系统的渐近行为,给出多智能体系统达成二阶一致性的充要条件。证明了当0是拉普拉斯矩阵的一个简单特征值且离散步长、旋转角小于由代数方程确定的临界值时,会出现渐近一致性。数值模拟结果证明理论结果的正确性。设计了特征参数影响二阶一致性的相关案例,说明特征参数相关结论可为控制理论的一致收敛分析提供重要判据和理论支撑。     

带有陀螺稳定器的动力系统随机响应分析

利用统计等效线化和正态降阶的方法,分析了阻尼力为非线性且带陀螺稳定器的单轨列车系统在平稳随机外力矩激励下的响应,得出了平稳随机外力矩激励对车厢在铅垂位置偏角的影响要小于对陀螺环转角的影响。     

Asymptotic analysis of periodic policies for the inventory routing problem

In this article, a distribution system is studied where the sum of transportation and inventory costs is to be minimized. The inventory holding cost is assumed to be the same for all retailers. A fixed partition (FP) periodic policy is proposed with tight asymptotic worst‐case performance of 3/2 with respect to the best possible policy. This bound cannot be improved in the class of FP periodic policies. In partition‐based PB policies, the retailers are first partitioned into sets and then the sets are grouped in such a way that sets of retailers within a group are served together at selected times. A PB periodic, policy is presented with tight worst‐case asymptotic performance of with respect to the best possible policy. This latter performance improves the worst‐case asymptotic performance of of the previously best known policy for this problem. We also show that the proposed PB periodic policy has the best worst‐case asymptotic performance within the class of PB policies. Finally, practical heuristics inspired by the analyzed policies are designed and tested. The asymptotic worst–case performances of the heuristics are shown to be the same of those of the analyzed policies. Computational results show that the heuristics suggested are less than 6.4% on average from a lower bound on the optimal cost when 50 or more retailers are involved. © 2013 Wiley Periodicals, Inc. Naval Research Logistics 00: 000–000, 2013     

线性控制系统的渐近跟踪控制与干扰解耦的设计及仿真

基于内模原理,针对线性控制系统设计了系统输出对参考信号的渐近跟踪控制和干扰解耦,同时实现了系统的镇定,并给出了设计算法和算例,通过MATLAB软件进行仿真,验证了该方法的有效性。     

双材料V型切口应力强度因子的加料有限元分析

应用Williams本征函数展开和线性变换求解V型切口端部渐进位移场。将该位移场加入常规等参单元位移模式中,构造双材料V型切口加料单元和过渡单元的位移模式,推导加料有限元方程。建立带V型缺口双材料三点弯曲梁试件和直角界面端平面问题的加料有限元模型,求解有限元方程可直接得到应力强度因子。计算结果与用其他方法得到的数据吻合,验证了方法的正确性,可用于双材料V型切口结构断裂特性计算分析。