利用 Nernst 效应的高 Tc 超导红外探测器分析

高T_c超导膜中Nernst效应的存在为研制辐射探测器开辟了新的途径。本文分析了以Nernst效应为基础的高T_c超导红外探测器的工作原理及有关的噪声源。     

快速的平行码临界路径跟踪故障模拟

针对平行码临界路径跟踪故障模拟中最费时间的扇出源故障模拟,提出了若干加速技术。通过对电路结构进行的独立扇出分支、扇出源分类及扇出源的最终汇聚门等静态分析,结合对停止线及停止扇出源、测试码标记向量以及扇出源临界性确定前的预处理等动态计算,使得扇出源故障模拟区域及需要故障模拟的扇出源数目大大减少,极大地缩短了整个故障模拟时间。实验结果表明,平行码临界路径跟踪故障模拟算法,对少量和大批的随机码都非常有效,并且随着电路规模增加,其有效性更加明显。     

引信在膛内的加速度响应分析

研究引信在膛内的受力情况,经典的分析方法是将弹丸和引信看成一个刚体,但随着对膛内问题的深入研究,发现这种方法和实测值出入很大.为更好地计算膛内引信的受力,本文在实测的基础上建立了弹丸引信系统在膛内冲击振动的力学模型,提出利用振动理论计算引信零件膛内加速度响应的方法,并对两种不同类型的弹丸引信系统进行计算比较,计算结果和实测值很接近,并发现此方法在簿壁弹上应用优越性更为突出.     

多机环境下系统程序并行化的实现方法

本文给出了多处理机环境对系统程序的要求,阐述了系统程序并行化研制过程中遇到的问题和解决办法,给出了实现临界段互斥的三种处理方法及其性能评价。     

战役优势参数及其应用研究

数学分析方法在军事行动计划中扮演着越来越显著的角色。对以兰彻斯特作战模型为基础的描述诸兵种合成作战的矩阵微分方程，以及由方程的控制矩阵和状态变量初值，在不解方程的情况下导出的战役优势参数进行了研究；以空战为例讨论了预测战役结局、辅助军事决策、优化兵力部署和规划火力分配等战役优势参数的主要应用；给出了对战役优势参数和数学模型的评价。     

Analysis of some critical aspects in hot machining of Ti-5553 superalloy: Experimental and FE analysis

In this study, a newly developed titanium superalloy, i.e., the Ti-5553 alloy has used for hot machining. This material replaced Ti-grade-5 alloy in the application of aerospace, automobile, and biomedical sector. However, similar to Ti-grade-5 alloy, the Ti-5553 alloy has a low thermal conductivity which makes it difficult-to-cut material categories hence, high tool wear, cutting force and bad surface finish. Hot machining of Ti-5553 has been studied at different machining condition (room and hot) using Deform-2D finite element analysis. The result from the simulation test was compared with the experimental value and reduction of cutting and thrust forces was observed. The experiment was carried out with the same input parameters as simulation, and good coherence between them observed. Additionally, cutting zone temperature, effective stress, etc. for both room and elevated the temperature are also discussed.     

滚动球变换支持下的TIN-DDM地形特征线自动提取方法

针对传统规则格网数字高程模型地形特征线提取方法中存在阈值难以定量调控、连接方式无法自适应调整以及地形特征线类型不完整的问题,将滚动球变换模型应用于不规则三角网数字水深模型(triangulated irregular network digital depth model,TIN-DDM)地形特征线的自动提取,在构建临界滚动球半径关联的地形特征点定量识别判定准则基础上,引入地形形态边界点概念,采用逆向工程的建模思路,建立了以剖分单元为基础的地形特征线自动提取模型,结合地形类型判定准则的多尺度表达特性及顾及水深数值的地形特征优化模型,提出了可多尺度表达且类型完整的地形特征线自动提取方法。试验结果表明:相比于经典地表流水模拟方法,该方法可实现完整、连续且细分的TIN-DDM地形特征线自动提取及多尺度表达,且提取的地形特征线具有更高的地形重构精度。     

论强化消防部队管理执行力

安全事故频发,引发部队管理危机,究其原因是多方面的,但是,管理中的＂三弱化＂是主因。如何提升管理中的执行力,应从四个方面入手,即强化培训式管理、走动式管理、数字化管理、问责制管理。夯实执行根基,提升执行监管,量化执行标准,重施执行奖惩,确保消防部队管理执行力的提升,是减少安全事故,确保部队高度安全稳定的根本途径。     

中国警卫工作在社会视角中的误区

中国警卫工作始终披着神秘面纱,面纱遮盖住警卫工作诸多秘密,也造成社会视角中对中国警卫工作认知的扭曲;社会生活中群众对警卫工作的扭曲认识,严重影响了警卫部队建设和警卫工作的开展。分析社会对警卫工作产生扭曲认识的原因,对警卫概念、发展史、基本机构和作用等方面加以介绍,还中国警卫工作一个真实面目。     

An attacker‐defender model for analyzing the vulnerability of initial attack in wildfire suppression

Wildfire managers use initial attack (IA) to control wildfires before they grow large and become difficult to suppress. Although the majority of wildfire incidents are contained by IA, the small percentage of fires that escape IA causes most of the damage. Therefore, planning a successful IA is very important. In this article, we study the vulnerability of IA in wildfire suppression using an attacker‐defender Stackelberg model. The attacker's objective is to coordinate the simultaneous ignition of fires at various points in a landscape to maximize the number of fires that cannot be contained by IA. The defender's objective is to optimally dispatch suppression resources from multiple fire stations located across the landscape to minimize the number of wildfires not contained by IA. We use a decomposition algorithm to solve the model and apply the model on a test case landscape. We also investigate the impact of delay in the response, the fire growth rate, the amount of suppression resources, and the locations of fire stations on the success of IA.