应变天平测量电路退化及失效检测技术

针对振动、温度应力等引起的风洞应变天平检测电路(惠斯登电桥)的退化或失效,提出一种检测方法。基于不同时刻在电桥不同节点施加激励并测量其响应,通过理论计算实现电桥的参数解析,基于聚类实现失效检测。研制了原理样机,并开展实验研究,实验结果表明该方法有效,可以实现电桥的失效检测,电桥电阻的测量精度可以达到0. 2‰以上。基于该方法设计的样机,可以实现应变天平检测电路的退化及失效的自动检测,节省故障诊断时间,提高风洞试验的可用时间。     

空化射流降解毒性有机物实验研究

利用空泡溃灭局部产生的高温高压、强压力脉冲和微射流,可对大分子有机物进行降解。将空化效应引入高压水射流形成空化射流可对毒性有机污染物进行降解。分析了空泡溃灭过程的物理化学效应,研究了空化射流降解苯酚的机理,设计了空化射流实验装置,对配制的苯酚溶液进行了不同实验条件下的空化射流降解对比实验,采用高效液相色谱法测定采集样品的苯酚质量浓度,对实验效果进行对比分析。实验结果表明：空化射流对苯酚降解有效,空化射流降解实验存在最优喷嘴入口压力和最优靶距。     

Estimating failure time distribution and its parameters based on intermediate data from a Wiener degradation model

Instead of measuring a Wiener degradation or performance process at predetermined time points to track degradation or performance of a product for estimating its lifetime, we propose to obtain the first‐passage times of the process over certain nonfailure thresholds. Based on only these intermediate data, we obtain the uniformly minimum variance unbiased estimator and uniformly most accurate confidence interval for the mean lifetime. For estimating the lifetime distribution function, we propose a modified maximum likelihood estimator and a new estimator and prove that, by increasing the sample size of the intermediate data, these estimators and the above‐mentioned estimator of the mean lifetime can achieve the same levels of accuracy as the estimators assuming one has failure times. Thus, our method of using only intermediate data is useful for highly reliable products when their failure times are difficult to obtain. Furthermore, we show that the proposed new estimator of the lifetime distribution function is more accurate than the standard and modified maximum likelihood estimators. We also obtain approximate confidence intervals for the lifetime distribution function and its percentiles. Finally, we use light‐emitting diodes as an example to illustrate our method and demonstrate how to validate the Wiener assumption during the testing. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

Choosing arrival process models for service systems: Tests of a nonhomogeneous Poisson process

Service systems such as call centers and hospital emergency rooms typically have strongly time‐varying arrival rates. Thus, a nonhomogeneous Poisson process (NHPP) is a natural model for the arrival process in a queueing model for performance analysis. Nevertheless, it is important to perform statistical tests with service system data to confirm that an NHPP is actually appropriate, as emphasized by Brown et al. [8]. They suggested a specific statistical test based on the Kolmogorov–Smirnov (KS) statistic after exploiting the conditional‐uniform (CU) property to transform the NHPP into a sequence of i.i.d. random variables uniformly distributed on [0,1] and then performing a logarithmic transformation of the data. We investigate why it is important to perform the final data transformation and consider what form it should take. We conduct extensive simulation experiments to study the power of these alternative statistical tests. We conclude that the general approach of Brown et al. [8] is excellent, but that an alternative data transformation proposed by Lewis [22], drawing upon Durbin [10], produces a test of an NHPP test with consistently greater power. We also conclude that the KS test after the CU transformation, without any additional data transformation, tends to be best to test against alternative hypotheses that primarily differ from an NHPP only through stochastic and time dependence. © 2014 Wiley Periodicals, Inc. Naval Research Logistics 61: 66–90, 2014     

基于GA-SVDD的轴承性能退化评估

为解决因机械设备轴承损伤导致机械故障而无法正常工作的问题,提出了一种基于GA-SVDD的轴承性能退化定量评估方法。该方法采用遗传算法优化选择特征参量,并建立SVDD超球体模型,运用SVDD距离评估轴承的性能退化程度。实验分析表明：该方法能够有效地对轴承性能退化过程的细节进行描述,实现对待测样本退化程度的定量评估。     

液相色谱-质谱法测定2-氯乙烯胂酸

研究了用液相色谱-质谱两种电离技术测定路易氏剂1的降解产物2-氯乙烯胂酸,比较了在不同流动相中该化合物的响应情况,并且利用源内CID技术获得了丰富质谱碎片,对所鉴定的碎片进行了解释,用选择离子检测得到该化合物的检测限在APCI电离技术中为9ng,在ESI电离技术中为4ng．     

元器件性能退化信息的系统性能可靠性评估

性能可靠性方法为解决现代工程实际中的高可靠、长寿命、小子样产品的可靠性建模分析提供了途径.目前的性能可靠性研究主要是针对元器件开展的,对系统性能可靠性进行研究时通常需要将其看作一个元器件,需要得到系统的性能退化数据,在某些情况下,得到系统的性能退化数据比较困难.实际上,由于元器件的性能退化导致系统性能的变化,因而可以利...     

N、P源对微生物法处理石油烃效果的影响

在微生物法处理石油烃的过程中,微生物对N、P源的供给非常敏感,不同的微生物对不同的N、P源的生物利用度是不相同的,N、P源的选择对降解效果有较大影响,所以有必要对最佳的N、P源进行筛选。对N、P源的逸择和加入量对降解效果的影响进行了研究,确定了最佳的N、P源分别为(NH4)2SO4、KH2PO4。在(NH4)2SO4、KH2PO4的质量浓度分别为100mg／L和60mg／L时,废水中石油烃的去除率最高。     

A stochastic model for burn‐in procedures in accelerated environment

Burn‐in procedure is a manufacturing technique that is intended to eliminate early failures of system or product. Burning‐in a component or system means to subject it to a period of use prior to being used in field. Generally, burn‐in is considered expensive and so the length of burn‐in is typically limited. Thus, burn‐in is most often accomplished in an accelerated environment in order to shorten the burn‐in process. A new failure rate model for an accelerated burn‐in procedure, which incorporates the accelerated ageing process induced by the accelerated environmental stress, is proposed. Under a more general assumption on the shape of failure rate function of products, which includes the traditional bathtub‐shaped failure rate function as a special case, upper bounds for optimal burn‐in time will be derived. A numerical example will also be given for illustration. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

基于退化速率跟踪粒子滤波的剩余使用寿命预测框架

毋庸置疑,剩余使用寿命预测对于设备的健康管理越来越重要。近年来粒子滤波方法被越来越多地应用到设备寿命预测技术当中,这是因为粒子滤波方法能更好的解决非线性非高斯系统滤波问题,而且能够获得不确定度信息。但该方法的预测性能却过度依赖于预测模型,并且对于模型参数的初始分布也比较敏感,这在一定程度上限制了粒子滤波预测方法的进一步发展。本文针对基本粒子滤波预测方法的不足,提出了一种基于退化速率跟踪粒子滤波的通用预测框架,以历史观测数据的退化速率统计规律作为指导来跟踪目标数据的退化速率,实现对粒子滤波预测方法的简化。并将该方法用于轴承和锂离子电池的剩余使用寿命预测,验证了方法的有效性。