镍(Ⅱ)系无机热敏材料的研究

制备出十余种镍(II)系热敏颜料,测定了它们的变色温度(Tc),较系统地研究了颜料组成、基料、填料及环境湿度等因素对变色特性的影响,初步讨论了颜料的变色机理。     

武器控制系统的核心部件功能耦合部件

论述了功能耦合部件的功能、组成,及对部件各组合件工作电路的情况,详细分析了功能耦合部件的工作原理。阐明武器控制系统通过功能耦合部件与火控系统进行信息交换,从而实现了对武器的正确控制。     

军事物流的若干问题刍议

针对军事物流的特点,本文分析了军事物流中物资储备、仓储管理和技术革新等存在的问题,并提出了相应的发展对策。     

RTI测试研究

运行支撑系统(RTI)作为应用高层体系结构(HLA)进行分布仿真的支撑系统,是实现HLA的核心。RTI的功能和性能直接关系到HLA仿真系统开发与应用的成败。首先阐述了RTI测试的内容和指标,接着结合例子详细研究了RTI测试的方法,最后对RTI测试研究进行了总结,为提高基于HLA的分布交互仿真系统的质量及可信度提供了基础。     

基于改进协同遗传算法的有效载荷系统功能序列规划方法

针对传统回溯算法在求解基于知识模型的有效载荷系统功能序列规划问题中搜索效率低的问题,提出一种基于"择劣变异"(Worst Individual Mutation,WIM)策略的协同遗传算法(Co-evolutionary Genetic Algorithm,CGA)的改进算法WIM-CGA。该算法在遗传过程中采用双路线进化方案,即"择优实施标准遗传过程,择劣实施变异操作",达到提高求解精确度及搜索效率的目的。仿真结果表明,同等测试条件下,当功能规模为50,约束密度为1.0时,WIM-CGA算法在限定时间内最优解的平均精确度比优化的回溯算法提高了54.15%,比CGA算法提高了6.18%,且当所得解的精确度大于90%时,WIM-CGA算法比CGA算法的迭代次数减少了65.79%,耗时降低了48.97%,显著提高了功能序列规划的效率。     

相变温控混凝土相变储热性能试验研究

混凝土中加入相变材料之后对水化反应产生的热量有一定的吸收,从而对混凝土内部温度有一定的控制作用,这将减少混凝土温度裂缝产生的几率.通过筛选带一定结晶水的硬脂酸、月桂酸和正十二醇的3种有机相变材料,模拟实际大体积混凝土工程来研究不同相变材料的掺量、控温效果.运用计算机软件绘制时间一温度曲线,从中搜寻出最佳的相变材料掺量.     

Maximizing deviation method for multiple attribute decision making under q-rung orthopair fuzzy environment

Because of the uncertainty and subjectivity of decision makers in the complex decision-making environment, the evaluation information of alternatives given by decision makers is often fuzzy and uncertain. As a generalization of intuitionistic fuzzy set (IFSs) and Pythagoras fuzzy set (PFSs), q-rung orthopair fuzzy set (q-ROFS) is more suitable for expressing fuzzy and uncertain information. But, in actual multiple attribute decision making (MADM) problems, the weights of DMs and attributes are always completely unknown or partly known, to date, the maximizing deviation method is a good tool to deal with such issues. Thus, combine the q-ROFS and conventional maximizing deviation method, we will study the maximizing deviation method under q-ROFSs and q-RIVOFSs in this paper. Firstly, we briefly introduce the basic concept of q-rung orthopair fuzzy sets (q-ROFSs) and q-rung interval-valued orthopair fuzzy sets (q-RIVOFSs). Then, combine the maximizing deviation method with q-rung orthopair fuzzy information, we establish two new decision making models. On this basis, the proposed models are applied to MADM problems with q-rung orthopair fuzzy information. Compared with existing methods, the effectiveness and superiority of the new model are analyzed. This method can effectively solve the MADM problem whose decision information is represented by q-rung orthopair fuzzy numbers (q-ROFNs) and whose attributes are incomplete.     

基于fMRI的静息状态脑功能复杂网络分析

分析静息状态下人脑中不同区域之间的功能连接模式对研究静息状态下人脑正常功能活动具有重要意义。基于复杂网络理论对脑功能网络进行建模,考察静息状态脑功能网络的结构和拓扑特性。结果显示,网络具有小世界性质和无标度特性。进一步引入一种概率混合模型分析网络社团结构,得到的10个子网络中包含视觉系统、听觉系统、运动系统、默认网络以及与执行和工作记忆相关的脑区。推测出静息状态脑功能网络是由这些相对独立又彼此关联的子网络组成,其中楔前叶和扣带回作为网络的关键节点,在信息调度和传递中占据重要地位。     

离子液体[SO3H-Bmim][HSO4]催化餐饮废油制备生物柴油

实验合成了一种磺酸基功能化离子液体,并用于催化高酸值餐饮废油制备生物柴油。当醇油物质的量之比为8∶1,离子液体用量为废油质量的0.8%,反应温度为150℃,反应时间为180min,生物柴油的产率可达到90.6%。该离子液体可以在比较温和的条件下将餐饮废油的酸值从13.22mgKOH/g降低到1mgKOH/g以下,然后利用NaOH催化生产生物柴油,会达到更高的产率,更为经济可行。     

Effect of wave shaper on reactive materials jet formation and its penetration performance

Wave shaper effect on formation behavior and penetration performance of reactive liner shaped charge (RLSC) are investigated by experiments and simulations. The reactive materials liner with a density of 2.3 g/cm³ is fabricated by cold pressing at a pressure of 300 MPa and sintering at a temperature of 380 °C. Experiments of the RLSC with and without wave shaper against steel plates are carried out at standoffs of 0.5, 1.0, and 1.5 CD (charge diameter), respectively. The experimental results show that the penetration depths and structural damage effects of steel plates decrease with increasing the standoff, while the penetration depths and the damage effects of RLSC without wave shaper are much greater than that with wave shaper at the same standoff. To understand the unusual experimental results, numerical simulations based on AUTODYN-2D code are conducted to discuss the wave shaper effect, including the propagation behavior of detonation wave, the velocity and temperature distribution of reactive jet, and penetration depth of reactive jet. The simulations indicate that, compared with RLSC without wave shaper, there is a higher temperature produced inside reactive jet with wave shaper. This unusual temperature rise effects are likely to be an important mechanism to cause the initiation delay time of reactive jet to decline, which results in significantly decreasing its penetration performance.