排序方式: 共有19条查询结果,搜索用时 15 毫秒
1.
王兴波 《国防科技大学学报》1995,17(4):136-142
利用插入节点的算法,本文研究了B—样条曲线的形状,得到了B—样条曲线拐点的一个定理。该定理描述了当控制多边形只有一个拐向点时B—样条曲线的拐点、尖点和二重点的关系。此项研究对于工程应用中的CAD有较实际的指导作用。 相似文献
2.
本文研究载人飞船三自由度标准返回轨道的设计方法。基本的设计思想是在返回坐标系中建立飞船返回轨道运动方程,用非等值的速度滚动角γv(t)使飞船再入过载均匀化及减小标准返回轨道与升力失控时自旋轨道的航程差,并引入侧向制导思想解决γv(t)的反向问题。仿真中用二重迭代方法确定有关参数,避免了参数选择的盲目性。仿真计算表明,本文提出的设计思想具有良好的实用价值。 相似文献
3.
《防务技术》2020,16(1):201-207
Three different kinds of PELE (the penetrator with lateral efficiency) were launched by ballistic artillery to impact the multi-layer spaced metal target plates. The impact velocities of the projectiles were measured by the velocity measuring system. The damage degree and process of each layer of target plate impacted by the three kinds of projectiles were analyzed. The experimental results show that all the three kinds of projectiles have the effect of expanding holes on the multi-layer spaced metal target plates. For the normal structure PELE(without layered) with tungsten alloy jacket and the radial layered PELE with tungsten alloy jacket, the diameters of holes on the second layer of plates are 3.36 times and 3.76 times of the diameter of the projectile, respectively. For radial layered PELE with W/Zr-based amorphous composite jacket, due to the large number of tungsten wires dispersed after the impact, the diameter of the holes on the four-layer spaced plates can reach 2.4 times, 3.04 times, 5.36 times and 2.68 times of the diameter of the projectile. Besides, the normal structure PELE with tungsten alloy jacket and the radial layered PELE whit tungsten alloy jacket formed a large number of fragments impact marks on the third target plate. Although the number of fragments penetrating the third target plate is not as large as that of the normal structure PELE, the area of dispersion of fragments impact craters on the third target plate is larger by the radial layered PELE. The radial layered PELE with W/Zr-based amorphous composite jacket released a lot of heat energy due to the impact of the matrix material, and formed a large area of ablation marks on the last three target plates. 相似文献
4.
为了得到横向效应增强型弹(Penetration with Enhanced Lateral Efficiency projectile, PELE)对金属薄靶垂直侵彻后的弹体轴向剩余速度,运用平面冲击波理论,对PELE的侵彻机理进行分析。参照平头弹体对靶板的侵彻模型,将PELE侵彻过程中的能量损失划分为以下几个部分:外壳体和内芯撞靶区域对应的环形塞块获得的能量、冲击波作用下弹体的内能增量以及剪切耗能等。然后根据能量守恒原理,得到PELE垂直侵彻金属薄靶后的PELE弹体轴向剩余速度的理论模型。为了验证该模型的合理性和准确性,设计相应的试验进行验证。结果表明,不同条件下得到的试验结果和理论模型得到的计算结果均吻合得较好。因此,得到的PELE垂直侵彻薄靶的轴向剩余速度理论模型可为工程应用提供指导和参考。 相似文献
5.
南阳膨胀土三向膨胀力规律研究 总被引:4,自引:1,他引:3
湿胀干缩是膨胀土的一个典型特征。膨胀土与水作用时,随着含水量的增加, 其体积将明显地增大,显示了强烈的膨胀性。当这种膨胀性受到限制时,必然产生膨胀力。膨胀力的大小与膨胀土的含水量和干密度有很大关系,研究膨胀力对深入了解膨胀土的变形和强度特性很有价值。通过12个三向膨胀力试验,研究了南阳陶岔重塑膨胀土膨胀力随含水量和干密度的变化规律。试验结果表明重塑膨胀土的三向膨胀力不等,水平膨胀力小于竖向膨胀力;给出了膨胀力与初始含水量和干密度的关系式,为工程建筑物的稳定分析提供了依据。 相似文献
6.
针对直接力/气动力复合作用动能拦截弹的姿态控制问题,建立了拦截弹俯仰-偏航通道短周期运动模型;利用线性二次型最优跟踪控制理论结合姿控固体小火箭点火逻辑设计了复合控制系统,通过分析非线性容限得出了该系统对直接力偏差具有强鲁棒性的结论;姿控回路仿真表明系统具有快速响应特性及良好的跟踪性能,考虑侧喷干扰效应等实际条件的六自由度弹道仿真表明所设计的控制系统能够满足拦截末段直接碰撞要求。 相似文献
7.
8.
运用冲击波理论,对横向效应增强型弹丸(Penetration with Enhanced Lateral Efficiency,PELE)侵穿金属靶板的机理进行了分析,将PELE侵彻过程中能量损失分为外壳和内芯撞击靶板区域环形塞块获得的能量,冲击波影响范围内外壳和内芯增加的内能,外壳前端外沿和内沿对靶板冲塞剪切耗能等,给出了确定这些能量的计算方法;并依据能量守恒原理,给出了PELE正撞金属薄靶板靶后剩余速度的近似计算公式。公式计算结果与多种条件下实验结果均吻合较好。分析计算所得各能量损失结果表明,弹体内芯材料的变化对弹体侵彻能力的影响较小;侵彻中靶板塞块获得的能量在弹体侵彻动能损失中比重最大;外壳前端内沿对靶板的剪切能耗对弹体动能损失的影响可以忽略。 相似文献
9.
基于椭球体的大椭圆航行是一种经济可行的远洋航法,为确保船舶沿期望的大椭圆航线航行,提出了一种大椭圆航线导航参数计算方法。该方法采用位置矢量法求解大椭圆顶点,进而定义了长轴矢量和短轴矢量,并在此基础上推导了形式更为紧凑的航向角、航程和偏航距计算公式。算例分析表明:该方法推导的公式计算简洁,可有效解决航海中大椭圆导航的计算问题。 相似文献
10.