富营养化水体修复技术的研究现状

湖泊、水库的富营养化已经成为当今世界最主要的环境问题之一。针对富营养化治理的关键问题、治理现状以及目前富营养化水体的一些主要修复技术进行了简要的阐述,并指出防治水体富营养化是一项复杂的系统工程,必须坚持从控制污染源出发,重点开展生态修复,完善管理对策,有计划地逐步实施。     

A novel variable topology design for a multi-flexible ejection mechanism

The airborne missile launch mechanism often subjects to significant deformations induced by the large ejection force during high-speed actuations in missile ejection process, leading to a substantial deviation of separation parameters from designed values that threats safety of the carrier. This study proposes a novel variable topology design for launch mechanism, achieved via a Prismatic-Revolute-Revolute pair (PR-R) motion formed by the structural gap with a specific direction. It enables launch mechanism variability during missile ejection process and optimizes the ejection force given by the front and back ejection arms, and greatly optimizes the separation parameters during missile ejection. The kinetics simulation analysis is conducted under working conditions of the original ejection mechanism and the novel mechanism with variable topology design, respectively. The results show that the novel variable topology design is more befitting for the launch process in terms of system safety and controllability, effectively improving the separation posture, restraining the flexible effect of the mechanism, and fulfilling the effectiveness of the design value of multi-rigid body.     

运动潜体湍流尾迹的SAR遥感仿真研究

采用点源法获得密度层化海洋中运动潜体产生的速度场,使用计入海洋内部湍流对海表面毛细重力波作用的SAR遥感全谱模式,利用考虑内波混合的湍流k-ε模式,并且使用Nasmyth海洋普适谱,建立了运动潜体湍流尾迹的SAR遥感仿真模型.利用该仿真模型对Rankine卵形体的湍流尾迹进行了仿真分析,获得令人满意的结果.     

刚性夹杂双周期分布的反平面问题

在遵循复合材料中各夹杂相互影响的条件下,构造呈双周期分布且相互影响的椭圆形刚性夹杂模型的复应力函数,采用复变函数的依次保角映射方法,达到满足各个夹杂的边界条件,利用围线积分将求解方程组化为线性代数方程组,推导出了椭圆形刚性夹杂呈双周期分布的界面应力解析表达式,并讨论了夹杂间距对界面应力最大值（应力集中系数）的影响规律,描绘出了曲线。     

铝质壳体弹丸破碎性试验破片回收率研究

针对当前没有铝质壳体弹丸破碎性试验破片回收率标准的现状,进行某型铝质壳体破甲弹破碎性试验,认为破片回收率低的原因是回收过程中破片损失和部分金属铝熔化,并从理论上计算铝质壳体在爆炸破裂过程熔化率,验证试验中破片回收率的合理性。     

Production to order and off‐line inspection when the production process is partially observable

This study combines inspection and lot‐sizing decisions. The issue is whether to INSPECT another unit or PRODUCE a new lot. A unit produced is either conforming or defective. Demand need to be satisfied in full, by conforming units only. The production process may switch from a “good” state to a “bad” state, at constant rate. The proportion of conforming units in the good state is higher than in the bad state. The true state is unobservable and can only be inferred from the quality of units inspected. We thus update, after each inspection, the probability that the unit, next candidate for inspection, was produced while the production process was in the good state. That “good‐state‐probability” is the basis for our decision to INSPECT or PRODUCE. We prove that the optimal policy has a simple form: INSPECT only if the good‐state‐probability exceeds a control limit. We provide a methodology to calculate the optimal lot size and the expected costs associated with INSPECT and PRODUCE. Surprisingly, we find that the control limit, as a function of the demand (and other problem parameters) is not necessarily monotone. Also, counter to intuition, it is possible that the optimal action is PRODUCE, after revealing a conforming unit. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

基于数据适应性检验的身管磨损量预测研究

应用灰色系统理论研究不确定系统,对系统进行灰色预测模型建立的同时,需要检验系统原始数据序列是否符合建模要求。主要从3个方面检验数据建模的可行性,分别是光滑比、极比偏差和凹凸性检验。结合某型坦克炮身管内膛烧蚀磨损数据,采用不同的磨损数据作为灰色预测模型建模的原始数据序列,具体分成两种情况进行数据检验,并代入模型计算,分析不同情况下模型的预测精度,通过对比计算结果选出与模型匹配度更高的原始数据序列。     

基于最优刚性编队分布式生成算法

为了描述一类特殊的刚性图,给出最优刚性图的概念。在保持队形时,最优刚性图可以减少拓扑图的复杂性。为了最大可能地减少队形通信的复杂性,研究了最优刚性编队的生成理论。首先,提出了4个命题,用以论证基于分布式的最优刚性生成方算法的可行性;其次,基于这些命题,提出了一种多智能体系统的编队算法;最后,通过仿真来验证所提算法的有效性。     

榴弹射表编拟新方法的试验验证

通过130加农炮射击试验,利用降阶刚体弹道方程,采用参数微分法提取阻力系数曲线,对18°射角进行编表符合计算,进而对榴弹射表编拟新方法进行了验证。     

弹载惯性测量系统抗高过载技术

在现代高技术条件下的局部战争中,为了提高火炮的射程、打击精度和反应速度,发展制导炮弹系统就成为必然的选择.弹体姿态测量系统是制导系统的重要组成部分,解决其在炮弹发射高过载恶劣环境下的生存问题就成为研究的关键之一.提出了主要抗高过载手段,并对弹体姿态测量系统的抗高过载性能进行了Ansys软件仿真、马歇特试验以及实弹飞行试验.最后得到结论,所给出的抗高过载方案在降低高过载对弹体姿态测量系统的影响方面,可以发挥良好的作用.