Threshold incentives over multiple periods and the sales hockey stick phenomenon

In this article, we study threshold‐based sales‐force incentives and their impact on a dealer's optimal effort. A phenomenon, observed in practice, is that the dealer exerts a large effort toward the end of the incentive period to boost sales and reach the threshold to make additional profits. In the literature, the resulting last‐period sales spike is sometimes called the hockey stick phenomenon (HSP). In this article, we show that the manufacturer's choice of the incentive parameters and the underlying demand uncertainty affect the dealer's optimal effort choice. This results in the sales HSP over multiple time periods even when there is a cost associated with waiting. We then show that, by linking the threshold to a correlated market signal, the HSP can be regulated. We also characterize the variance of the total sales across all the periods and demonstrate conditions under the sales variance can be reduced. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

一种基于零控脱靶量的滑模末制导律设计

基于零控脱靶量的思想,提出一种能够有效针对大气层再入目标的滑模末制导律.首先,建立纵向平面内的弹目相对运动方程;然后利用扩张状态观测器对目标机动加速度信息进行估计,并对零控脱靶量算法进行分析,提出了制导律的设计思路;接着利用滑模变结构控制理论进行制导律的推导;最后进行仿真分析,仿真结果证明,所设计的制导律能够很好地对目标弹进行拦截,并且指令的跟踪效果也很好,从而验证了算法的有效性.     

Resale price maintenance contracts with retailer sales effort: Effect of flexibility and competition

In Resale Price Maintenance (RPM) contracts, the manufacturer specifies the resale price that retailers must charge to consumers. We study the role of using a RPM contract in a market where demand is influenced by retailer sales effort. First, it is well known that RPM alone does not provide incentive for the retailer to use adequate sales effort and some form of quantity fixing may be needed to achieve channel coordination. However, when the market potential of the product is uncertain, RPM with quantity fixing is a rigid contract form. We propose and study a variety of RPM contracts with quantity fixing that offer different forms of flexibility including pricing flexibility and quantity flexibility. Second, we address a long‐time debate in both academia and practice on whether RPM is anti‐competitive in a market when two retailers compete on both price and sales effort. We show that depending on the relative intensity of price competition and sales effort competition, RPM may lead to higher or lower retail prices compared to a two‐part tariff contract, which specifies a wholesale price and a fixed fee. Further, the impact of RPM on price competition and sales effort competition is always opposite to each other. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

Why nations fail: defense spending,fighting commitment and,inter-nations-prosperity-poverty-gap

Both the increasing defense spending and the widening divergence between rich and poor countries are of great concerns. This paper attempts to explain the two concepts in a unify theory framework. In the view of conflict economics, a nation’s defense spending can be seen as the fighting commitment of distributive effort in the global economy while other is the productive effort. The development of global economy needs the productive efforts from almost every nation, and the distribution of the aggregate output is determined in large degree by the fighting commitment of each nation. The numerical simulation of the model gives a reasonable explanation of the patterns of the divergence/convergence of prosperity-poverty gap between nations, the fact which is evidenced by many empirical analyses. (1) Given the initial wealth ratio between nations fixed, there is a critical value of fighting decisiveness, when the actual value is larger than the critical value, it is more likely to result in Matthew effect; otherwise the gap would gradually be shortened. (2) Given the fighting decisiveness fixed, there is a critical value of initial wealth ratio, when the actual value is larger than the critical value, it is more likely to result in Matthew effect; otherwise, the gap would gradually be shortened. The study gives a new perspective to explain and handle the increasingly defense spending and the prosperity-poverty gap between nations.     

Dynamic learning,pricing, and ordering by a censored newsvendor

We address the problem of determining optimal ordering and pricing policies in a finite‐horizon newsvendor model with unobservable lost sales. The demand distribution is price‐dependent and involves unknown parameters. We consider both the cases of perishable and nonperishable inventory. A very general class of demand functions is studied in this paper. We derive the optimal ordering and pricing policies as unique functions of the stocking factor (which is a linear transformation of the safety factor). An important expression is obtained for the marginal expected value of information. As a consequence, we show when lost sales are unobservable, with perishable inventory the optimal stocking factor is always at least as large as the one given by the single‐period model; however, if inventory is nonperishable, this result holds only under a strong condition. This expression also helps to explain why the optimal stocking factor of a period may not increase with the length of the problem. We compare this behavior with that of a full information model. We further examine the implications of the results to the special cases when demand uncertainty is described by additive and multiplicative models. For the additive case, we show that if demand is censored, the optimal policy is to order more as well as charge higher retail prices when compared to the policies in the single‐period model and the full information model. We also compare the optimal and myopic policies for the additive and multiplicative models. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

On the (S − 1, S) lost sales inventory model with priority demand classes

In this paper an inventory model with several demand classes, prioritised according to importance, is analysed. We consider a lot‐for‐lot or (S ? 1, S) inventory model with lost sales. For each demand class there is a critical stock level at and below which demand from that class is not satisfied from stock on hand. In this way stock is retained to meet demand from higher priority demand classes. A set of such critical levels determines the stocking policy. For Poisson demand and a generally distributed lead time, we derive expressions for the service levels for each demand class and the average total cost per unit time. Efficient solution methods for obtaining optimal policies, with and without service level constraints, are presented. Numerical experiments in which the solution methods are tested demonstrate that significant cost reductions can be achieved by distinguishing between demand classes. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 593–610, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10032     

Quality risk in outsourcing: Noncontractible product quality and private quality cost information

This article addresses the concept of quality risk in outsourcing. Recent trends in outsourcing extend a contract manufacturer's (CM's) responsibility to several functional areas, such as research and development and design in addition to manufacturing. This trend enables an original equipment manufacturer (OEM) to focus on sales and pricing of its product. However, increasing CM responsibilities also suggest that the OEM's product quality is mainly determined by its CM. We identify two factors that cause quality risk in this outsourcing relationship. First, the CM and the OEM may not be able to contract on quality; second, the OEM may not know the cost of quality to the CM. We characterize the effects of these two quality risk factors on the firms' profits and on the resulting product quality. We determine how the OEM's pricing strategy affects quality risk. We show, for example, that the effect of noncontractible quality is higher than the effect of private quality cost information when the OEM sets the sales price after observing the product's quality. We also show that committing to a sales price mitigates the adverse effect of quality risk. To obtain these results, we develop and analyze a three‐stage decision model. This model is also used to understand the impact of recent information technologies on profits and product quality. For example, we provide a decision tree that an OEM can use in deciding whether to invest in an enterprise‐wide quality management system that enables accounting of quality‐related activities across the supply chain. © 2009 Wiley Periodicals, Inc. Naval Research Logistics 2009     

空间拦截零控脱靶量与末段制导能量需求的近似计算

基于理想二体假设下的弹道方程解析式,忽略重力在拦截末段对拦截器和目标运动状态的影响.推导了空间拦截初始制导偏差与终端零控脱靶量之间的线性近似计算式,并以速度增量的大小来近似描述拦截末端主动寻的制导段的能量需求,给出了拦截末段制导最小能量需求与零控脱靶量、探测距离之间的近似关系.通过数字仿真测试了近似计算的准确性.     

Exact analysis of (R,s, S) inventory control systems with lost sales and zero lead time

We study an (R, s, S) inventory control policy with stochastic demand, lost sales, zero lead‐time and a target service level to be satisfied. The system is modeled as a discrete time Markov chain for which we present a novel approach to derive exact closed‐form solutions for the limiting distribution of the on‐hand inventory level at the end of a review period, given the reorder level (s) and order‐up‐to level (S). We then establish a relationship between the limiting distributions for adjacent values of the reorder point that is used in an efficient recursive algorithm to determine the optimal parameter values of the (R, s, S) replenishment policy. The algorithm is easy to implement and entails less effort than solving the steady‐state equations for the corresponding Markov model. Point‐of‐use hospital inventory systems share the essential characteristics of the inventory system we model, and a case study using real data from such a system shows that with our approach, optimal policies with significant savings in inventory management effort are easily obtained for a large family of items.     

Optimal pricing and inventory control policy in periodic‐review systems with fixed ordering cost and lost sales

This paper studies a periodic‐review pricing and inventory control problem for a retailer, which faces stochastic price‐sensitive demand, under quite general modeling assumptions. Any unsatisfied demand is lost, and any leftover inventory at the end of the finite selling horizon has a salvage value. The cost component for the retailer includes holding, shortage, and both variable and fixed ordering costs. The retailer's objective is to maximize its discounted expected profit over the selling horizon by dynamically deciding on the optimal pricing and replenishment policy for each period. We show that, under a mild assumption on the additive demand function, at the beginning of each period an (s,S) policy is optimal for replenishment, and the value of the optimal price depends on the inventory level after the replenishment decision has been done. Our numerical study also suggests that for a sufficiently long selling horizon, the optimal policy is almost stationary. Furthermore, the fixed ordering cost (K) plays a significant role in our modeling framework. Specifically, any increase in K results in lower s and higher S. On the other hand, the profit impact of dynamically changing the retail price, contrasted with a single fixed price throughout the selling horizon, also increases with K. We demonstrate that using the optimal policy values from a model with backordering of unmet demands as approximations in our model might result in significant profit penalty. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2006