利用 Nernst 效应的高 Tc 超导红外探测器分析

高T_c超导膜中Nernst效应的存在为研制辐射探测器开辟了新的途径。本文分析了以Nernst效应为基础的高T_c超导红外探测器的工作原理及有关的噪声源。     

油管油压信号的载荷识别

在高速柴油发动机喷油系统性能检测中,一般以燃油压力信号作为喷油系统性能检测参量。通过对油压波形进行分析来判断喷油系统的工作状况,阐述了采用载荷识别技术识别油压信号的频谱特性,进而得到其时域波形的理论与方法,并在模拟试验中获得了识别结果。     

数据光滑的一种新方法

提出了用变形的Fourier部分和来代替Fourier级数将输入数据光滑的一种新方法。该方法能稳定地解某些不适定的问题,如给定函数的近似,求函数微分的问题;Laplace方程Cauchy问题;时间逆向热传导方程的Cauchy问题等。     

引信在膛内的加速度响应分析

研究引信在膛内的受力情况,经典的分析方法是将弹丸和引信看成一个刚体,但随着对膛内问题的深入研究,发现这种方法和实测值出入很大.为更好地计算膛内引信的受力,本文在实测的基础上建立了弹丸引信系统在膛内冲击振动的力学模型,提出利用振动理论计算引信零件膛内加速度响应的方法,并对两种不同类型的弹丸引信系统进行计算比较,计算结果和实测值很接近,并发现此方法在簿壁弹上应用优越性更为突出.     

关于烟雾对光电成像装备的干扰效果试验及其试验靶标

主题是如何通过外场试验定量评价烟雾对光电成像装备的干扰效果。提出一种综合靶标,可用于这种外场试验,也可考察光电成像装备抗烟雾干扰的能力。它适用于普通观瞄器材、照相侦察和摄像装备、微光夜视设备、热成像系统等。     

战役优势参数及其应用研究

数学分析方法在军事行动计划中扮演着越来越显著的角色。对以兰彻斯特作战模型为基础的描述诸兵种合成作战的矩阵微分方程，以及由方程的控制矩阵和状态变量初值，在不解方程的情况下导出的战役优势参数进行了研究；以空战为例讨论了预测战役结局、辅助军事决策、优化兵力部署和规划火力分配等战役优势参数的主要应用；给出了对战役优势参数和数学模型的评价。     

带内双频电磁辐射对频率步进连续波雷达的虚警干扰规律

为掌握带内双频电磁辐射对雷达的虚警干扰规律,以频率步进连续波雷达为研究对象,基于理论分析与效应试验,研究了虚警目标的电平变化规律、波形特征以及出现位置规律。结果表明:受试雷达在带内双频电磁辐射作用下,不考虑互调干扰时,至多产生两个位置随机的“山丘型”虚警目标,两者距离差与双频干扰频差有关。双频干扰中两分量互相压制,即当任一干扰分量强度恒定时,随着另一个分量的增强,前者形成的虚警目标电平缓慢下降,最终降速基本恒定,而后者形成虚警目标电平逐渐升高,直至电平恒定;若双频干扰信号两分量同比例增强,则两个虚警目标电平均在初期近似线性上升,而后增速逐渐降低至零。     

Military Off the Shelf Procurements: A Norwegian Case Study

Buying off the shelf procurements (OTS) has become an important part of the national acquisition strategy in several countries, and this paper seeks to bring empirical evidence on OTS as the preferred acquisition strategy by use of data from 2015 to 2022 investment portfolio of the Norwegian Armed Forces. We develop definitions for three categories of procurement – OTS, modified OTS and development projects – as well as a method to classify projects into these categories. Our first finding is that the characteristics of OTS projects correspond to modified OTS and development projects. Our second finding indicates that OTS projects perform better when it comes to the completion of projects according to the initial schedule, compared to development projects.     

Analysis of some critical aspects in hot machining of Ti-5553 superalloy: Experimental and FE analysis

In this study, a newly developed titanium superalloy, i.e., the Ti-5553 alloy has used for hot machining. This material replaced Ti-grade-5 alloy in the application of aerospace, automobile, and biomedical sector. However, similar to Ti-grade-5 alloy, the Ti-5553 alloy has a low thermal conductivity which makes it difficult-to-cut material categories hence, high tool wear, cutting force and bad surface finish. Hot machining of Ti-5553 has been studied at different machining condition (room and hot) using Deform-2D finite element analysis. The result from the simulation test was compared with the experimental value and reduction of cutting and thrust forces was observed. The experiment was carried out with the same input parameters as simulation, and good coherence between them observed. Additionally, cutting zone temperature, effective stress, etc. for both room and elevated the temperature are also discussed.     

Regular and irregular forces in conflict: nineteenth century insurgencies in South America

ABSTRACT

In the decades following independence from Spain, ‘civil wars’ ravaged the newly established polities in South America. Former vice-regal capitals inherited a larger portion of the colonial administration and had larger economic resources and a hegemonic project they were able to have permanent and professional armed forces, capable of leading the offensive and giving battle following the European rules of military art. The central hypothesis of this work is that there is a necessary relationship between the shape of these asymmetrical conflicts, their outcome and the political territorial configuration of each country in post-revolutionary Spanish America. When permanent armies took over from local militias, the capital kept the integrity of its territories and there was a tendency towards political centralization. When this did not happen and the militias managed to find a way to defeat their centralizing enemies, the local powers had an opportunity to renegotiate their participation in the political body, and sought to maintain their independence, which was manifest in federal agreements, otherwise a process of territorial fragmentation began. More than a difference between regular and irregular forces there was one between intermittent, and permanent mobilization.