机械振动特征分析中的信号处理技术与微机特征分析系统

文中指出抑制阶比混迭和泄漏是建立一套完整的微机特征分析系统中需要解决的二个关键的信号处理问题。提出了阶比滤波器是抑制阶比混迭有效和实用的方法;并研制频率比合成器以抑制泄漏。介绍了由频率比合成器、阶比滤波器、TMS32010数据采集装置、主机和绘图仪所组成的微机特征分析系统。最后给出了该微机特征分析系统对轴承进行故障诊断的结果。     

火炮射表数据处理计算步骤和程序框图

本文是文献［１—３］的继续,主要研究火炮射表数据处理算法的计算步骤和程序设计框图。这两个内容是正确进行程序设计、分析和使用的重要环节。     

带噪声的 AR 模型的参数估计及定阶

本文讨论了带噪声情形下 AR 模型的参数估计及定阶问题,还给出了噪声模型的参数估计,并证明了它们的强相容性。     

On efficient algorithms for finding efficient salvo policies

We consider the salvo policy problem, in which there are k moments, called salvos, at which we can fire multiple missiles simultaneously at an incoming object. Each salvo is characterized by a probability p_i: the hit probability of a single missile. After each salvo, we can assess whether the incoming object is still active. If it is, we fire the missiles assigned to the next salvo. In the salvo policy problem, the goal is to assign at most n missiles to salvos in order to minimize the expected number of missiles used. We consider three problem versions. In Gould's version, we have to assign all n missiles to salvos. In the Big Bomb version, a cost of B is incurred when all salvo's are unsuccessful. Finally, we consider the Quota version in which the kill probability should exceed some quota Q. We discuss the computational complexity and the approximability of these problem versions. In particular, we show that Gould's version and the Big Bomb version admit pseudopolynomial time exact algorithms and fully polynomial time approximation schemes. We also present an iterative approximation algorithm for the Quota version, and show that a related problem is NP-complete.     

浅海中非金属圆柱体的扰动电场

为研究主动电场作用下非金属圆柱体目标所产生的扰动电场分布,基于镜像法和区域网格化的思想,建立了浅海环境下非金属目标的二次电偶极子模型。利用该模型计算出目标周围不同位置处的扰动电场,并与边界元软件仿真结果进行对比,结果表明扰动电场水平分量误差小于3%。开展水池模型实验,实测结果与所提模型计算值基本一致,证明了所建立的二次电偶极子模型的准确性。     

Numerical investigation of dynamic interaction with projectile and harmonic behaviour for T-finned machine gun barrels

Machine gun barrels differ from their rifle counterparts in terms of profile. To support high rates of sustained fire, machine gun barrels are made thicker in order to dissipate more heat and maintain their flexural rigidity and thus accuracy, but on other hand they also contribute in weight addition to weapon. This investigation deals with comparison between a conventional machine gun barrel and an improved innovative design having T-fins, both having same weight and chambered in 5.56 × 45 NATO ammunition, to compare their structural and harmonic characteristics which were parameterized by factors such as modal spectrum, directional deformation at muzzle ends during a single shot fire and harmonic behaviour at corresponding range of exciting frequencies. The solid models of both the barrels having same weight, were created using Solidworks. The continuous input data functions were generated by MATLAB using the field tested discreet data points. The generated velocity-distance functions were converted into time dependent functions using integration algorithms to calculate transient parameters such as time steps, excitation frequency range, angle of rotation of projectile and its angular velocity. The dynamic condition simulated the varying nature of forces due to eccentricity in projectile and this data was fed to a time step study using ANSYS transient structural work bench followed by modal and harmonic analysis. The results showed a significant reduction in muzzle end deformation which thus proved that the T-finned barrel, although had same weight as that of the conventional one, but had better structural and harmonic characteristics, and hence it would inherit better firing accuracy.     

目标宽频带RCS的快速算法研究

目标宽带RCS预估算法一直是计算电磁学的一个研究热点,本文分别研究了渐近波形估计技术（AWE）与最佳一致逼近技术在宽频带RCS预估领域内的应用。首先,介绍了传统矩量法计算RCS的原理,并分析了两种快速算法的计算过程。然后,采用这两种技术,分别计算了简易飞机模型的RCS值,并对这两种方法进行比较。计算结果表明相比传统的矩量法,这两种方法在不影响精度的前提下大大提高了计算效率。同时,相比渐近波形估计技术,最佳一致逼近技术在节省内存,节约时间方面更具优势。最后,采用最佳一致逼近理论,结合电磁计算软件,实现较大尺寸目标的宽频带RCS的计算。     

Single‐machine scheduling with deadlines to minimize the total weighted late work

We consider scheduling a set of jobs with deadlines to minimize the total weighted late work on a single machine, where the late work of a job is the amount of processing of the job that is scheduled after its due date and before its deadline. This is the first study on scheduling with the late work criterion under the deadline restriction. In this paper, we show that (i) the problem is unary NP‐hard even if all the jobs have a unit weight, (ii) the problem is binary NP‐hard and admits a pseudo‐polynomial‐time algorithm and a fully polynomial‐time approximation scheme if all the jobs have a common due date, and (iii) some special cases of the problem are polynomially solvable.     

守望生命中的第二故乡——探析沈苇诗歌的新疆主题

生于江南水乡的诗人沈苇,大学毕业后来到新疆。身为异乡人的他,对脚下这片独具异域特点的土地饱含着一份炙热的爱。到如今,新疆已成为他生命中的第二故乡。新疆主题,一直以来是沈苇诗歌创作的根源和内在的精神原动力,他执着在异域他乡的诗人之路上,努力在第二故乡里寻求灵魂的栖息地,从而完成对个体生命强度、韧性以及承载力的检验。     

一类非正态误差下的AR模型定阶研究

对一类非正态误差的AR模型,在待定阶数P的情况下,给出误差项中未知实函数依概率有界的定理,可把非正态误差转化为正态情况。最后运用正态误差下AR模型的方法确定阶数和参数,并给出一个算例。