机构运动弹性动力学普遍方程的研究

本文首次采用等参有限单元,建立了一个为一般机构广泛适用的运动弹性动力学普遍方程。在不附加任何“运动学”假设的情况下,作为自然的结果,方程的质量阵是正定、协调的常数阵;方程中不存在两类时变的非对称系数项,即所谓的“陀螺阻尼”项和“离心动刚度”项。因此,该方程无论在形式上还是在生成及求解方面,都要较其它同类型方程简单。此外,基于一维等参梁单元,本文还具体导出了具有杆状构件的平面连杆机构的弹性动力学模型,并给出了一个铰链四杆机构的算例。     

光学仪器故障诊断系统的数学模型

在本文提出的一种光学仪器故障诊断系统数学模型中,将一个故障及其原因,分别用m、n维矢量表示。借助光学调整理论,导出相应的判断方程,在对原因进行适当筛选后,应用拉格朗日乘子法,求出它们的解。这个模型可以用于一类新型智能化的检测设备中,也可以用于编制通用的故障分析程序。     

Hill 方程在远距离拦截中的应用

提出了一种通过坐标系移动,化原系中的大相对距离为新系中的小相对距离,以减小Ｈｉｌｌ方程在大相对距离时的模型误差的方法,即当拦截器的相对距离达到某一精度许可的值ρ＿１时（定义ρ＿１为精度控制参数,例如可取ρ＿１＝５００ｋｍ）,以拦截器位置为原点,建立一假想的动参考系,将拦截器在原动系中的相对运动参数转换为新系中的相对运动参数（显然在新系中的初始相对距离）,从而化大相对距离为小相对距离问题,提高Ｈｉｌｌ方程的描述精度。本文给出了方法的理论分析及两个计算机仿真实例,该法确可有效地减小Ｈｉｌｌ方程在大相对距离时的模型误差,结果是令人满意的。     

平面交叉杆系变形协调普适方程及其通解

本文运用拓扑学、微分学、几何学的数学方法,捕捉到平面三交叉杆系的变形特点——拓扑特征.在小变形条件下,通过变换得到变形协调普适方程.从而推导出解此类拉压超静定问题的一种快速有效方法.该方法可直接应用于教学与工程计算.     

基于输出协方差配置的车辆振动控制系统设计

通过对车辆振动系统的振动特性分析,确定出系统反馈控制的设计目标。基于对［１］中状态协方差配置控制理论的推广,文中给出了控制器设计的具体方法,并举例说明该设计方法具有直接有效的特点     

旋成体射弹倾斜入水运动仿真

为了研究运动参数和弹头外形对弹体斜入水过程的影响规律,采用气液两相流体积分数和水汽空化模型,通过嵌套网格实现刚体三自由度运动学和动力学耦合,模拟了弹体以80～100 m/s速度倾斜入水开空泡阶段的运动过程。经文献实验验证,入水弹体速度与位移的误差为0～6%和-8%～0,转动角度误差为-6%～0。通过对入水速度和入水角度的多工况模拟研究,发现入水速度增大,弹体轴向冲击载荷增大,最大载荷与速度的平方呈线性关系,弹体速度非线性衰减率大;入水角增大,弹体转动角速率减小,运动稳定性强,速度衰减率不受入水角影响。与圆锥头部弹体相比,采用头部阶梯状修型后的弹体的平均速度衰减率、转动角速率和最大轴向冲击载荷分别降低到66.7%、40%和77.2%,显著提高了运动稳定性。     

Integrating decisions with advance supply information in an assemble-to-order system

We study a periodic-review assemble-to-order (ATO) system with multiple components and multiple products, in which the inventory replenishment for each component follows an independent base-stock policy and stochastic product demands are satisfied according to a First-Come-First-Served rule. We assume that the replenishment for various component suffers from lead time uncertainty. However, the decision maker has the so-called advance supply information (ASI) associated with the lead times and thus can take advantage of the information for system optimization. We propose a multistage stochastic integer program that incorporates ASI to address the joint optimization of inventory replenishment and component allocation. The optimal base-stock policy for the inventory replenishment is determined using the sample average approximation algorithm. Also, we provide a modified order-based component allocation (MOBCA) heuristic for the component allocation. We additionally consider a special case of the variable lead times where the resulting two-stage stochastic programming model can be characterized as a single-scenario case of the proposed multistage model. We carry out extensive computational studies to quantify the benefits of integrating ASI into joint optimization and to explore the possibility of employing the two-stage model as a relatively efficient approximation scheme for the multistage model.     

Application of Markov renewal theory and semi-Markov decision processes in maintenance modeling and optimization of multi-unit systems

In this paper, a condition-based maintenance model for a multi-unit production system is proposed and analyzed using Markov renewal theory. The units of the system are subject to gradual deterioration, and the gradual deterioration process of each unit is described by a three-state continuous time homogeneous Markov chain with two working states and a failure state. The production rate of the system is influenced by the deterioration process and the demand is constant. The states of the units are observable through regular inspections and the decision to perform maintenance depends on the number of units in each state. The objective is to obtain the steady-state characteristics and the formula for the long-run average cost for the controlled system. The optimal policy is obtained using a dynamic programming algorithm. The result is validated using a semi-Markov decision process formulation and the policy iteration algorithm. Moreover, an analytical expression is obtained for the calculation of the mean time to initiate maintenance using the first passage time theory.     

Optimal allocation of minimal repairs in parallel and series systems

In reliability engineering, the concept of minimal repair describes that the repair brings the failed unit (eg, system or component) to the situation which is same as it was just before the failure. With the help of the well‐known Gamma‐Poisson relationship, this paper investigates optimal allocation strategies of minimal repairs for parallel and series systems through implementing stochastic comparisons of various allocation policies in terms of the hazard rate, the reversed hazard rate, and the likelihood ratio orderings. Numerical examples are presented to illustrate these findings as well. These results not only strengthen and generalize some known ones in the seminal work of Shaked and Shanthikumar, but also solve the open problems proposed by Chahkandi et al.'s study and Arriaza et al.'s study.     

适用于北斗混合星座的相对定位随机模型建模策略

为提高模糊度解算成功率和基线解精度,提出适用于北斗的相对定位随机模型建模策略,即混合随机建模策略。采用最小二乘方差分量估计方法对北斗单差观测量方差进行估计。对处于不同高度的三轨道卫星观测量方差分别建模:对地球静止轨道卫星观测量方差采用载噪比模型建模,对倾斜地球同步轨道卫星和中地球轨道卫星观测量方差均采用仰角模型建模。根据不同模型实时组建观测量的随机模型。试验结果表明:相比于采用传统简化模型和单一的仰角或载噪比模型,混合随机模型能更加真实地反映不同卫星观测量的随机噪声特性,模糊度解算成功率和相对定位精度均有提高,总体性能最优,因而能更好地适用于北斗系统。