一种信号检测模糊技术及其应用

本文基于模糊理论,建立一种信号检测的模糊模型,并实际运用于连续波多普勒测速雷达目标速度的提取,取得了满意的结果     

高速水射流倒空弹体装药安全性研究

本文阐述了高速水射流倒空弹体装药的机理,建立了确定水射流引爆炸药的临界速度的模拟实验方法和模型,进行了高速水射流冲击炸药的安全性试验,并对试验结果进行了分析,证明在工作泵压下高速水射流倒空弹体装药安全、可靠。     

智能化转速测试系统的原理及设计

本文在收集众多的转速测量方案的基础上,提出由光电反射式传感器或霍尔传感器与8098单片机构成一套可在坦克上应用的智能化转速测试系统,并进行了电路硬件设计和软件编制.     

Interface defeat studies of long-rod projectile impacting on ceramic targets

The interface defeat phenomenon always occurs when a long-rod projectile impacting on the ceramic target with certain velocity, i.e., the projectile is forced to flow radially on the surface of ceramic plates for a period of time without significant penetration. Interface defeat has a direct effect upon the ballistic performance of the armor piercing projectile, which is studied numerically and theoretically at present. Firstly, by modeling the projectiles and ceramic targets with the SPH (Smoothed Particle Hydrodynamics) particles and Lagrange finite elements, the systematic numerical simulations on interface defeat are performed with the commercial finite element program AUTODYN. Three different responses, i.e., complete interface defeat, dwell and direct penetration, are reproduced in different types of ceramic targets (bare, buffered, radially confined and oblique). Furthermore, by adopting the validated numerical algorithms, constitutive models and the corresponding material parameters, the influences of projectile (material, diameter, nose shape), constitutive models of ceramic (JH-1 and JH-2 models), buffer and cover plate (thickness, constraints, material), as well as the prestress acted on the target (radial and hydrostatic) on the interface defeat (transition velocity and dwell time) are systematically investigated. Finally, based on the energy conservation approach and taking the strain rate effect of ceramic material into account, a modified model for predicting the upper limit of transition velocity is proposed and validated. The present work and derived conclusions can provide helpful reference for the design and optimization of both the long-rod projectile and ceramic armor.     

An investigation on anti-impact and penetration performance of basalt fiber composites with different weave and lay-up modes

The woven basalt fiber composites (WBFC) and the unidirectional [0°/90°/45°/-45°]_s basalt fiber composites (UBFC) were prepared by hot-pressing. Three-point bending test, low velocity impact test, and ballistic test were performed to the prepared composites. After the tests, the specimens were recovered and analyzed for micromorphology. Three-point bending tests show that both the bending strength and stiffness of the WBFC surpass those of the UBFC. Low velocity impact test results show that the low velocity impact resistance to hemispherical impactor of the UBFC is higher than that of the WBFC, but the low velocity impact resistance to sharp impactor of the UBFC is lower than that of the WBFC. For the ballistic test, it can be found that the ballistic property of the UBFC is higher than that of the WBFC. After the tests, microscopic analysis of the specimens was applied, and their failure mechanism was discussed. The main failure modes of the UBFC are delamination and fibers breakage under the above loading conditions while the main failure mode of the WBFC is fibers breakage. Although delamination damage can be found in the WBFC under the above loading conditions, the degree of delamination is far less than that of the UBFC.     

横向效应增强型弹垂直侵彻薄靶的轴向剩余速度理论分析

为了得到横向效应增强型弹（Penetration with Enhanced Lateral Efficiency projectile, PELE）对金属薄靶垂直侵彻后的弹体轴向剩余速度,运用平面冲击波理论,对PELE的侵彻机理进行分析。参照平头弹体对靶板的侵彻模型,将PELE侵彻过程中的能量损失划分为以下几个部分：外壳体和内芯撞靶区域对应的环形塞块获得的能量、冲击波作用下弹体的内能增量以及剪切耗能等。然后根据能量守恒原理,得到PELE垂直侵彻金属薄靶后的PELE弹体轴向剩余速度的理论模型。为了验证该模型的合理性和准确性,设计相应的试验进行验证。结果表明,不同条件下得到的试验结果和理论模型得到的计算结果均吻合得较好。因此,得到的PELE垂直侵彻薄靶的轴向剩余速度理论模型可为工程应用提供指导和参考。     

稀薄气体动理论中介观尺度数值模拟的加速方法

针对滑移流、早期过渡流区域采用离散速度法(discrete velocity method, DVM)求解Boltzmann方程收敛速度极慢、计算资源消耗大的难题,提出全流场耦合介观/宏观方程加速方法。在介观层面基于有限差分的DVM求解Boltzmann方程,在宏观层面基于有限体积的压力耦合方程组半隐式方法求解矩方程,充分利用纳维-斯托克斯-傅里叶/R26矩方程在低克努森数下的快速收敛特性,对介观方程进行加速。基于高阶Hermite多项式重构分布函数,完成宏观方程与介观方程之间的数据传输。仿真结果表明:全流场耦合介观/宏观方程的加速方法在滑移流、早期过渡流区域具有显著加速性能,最大降低了95.28%的计算时长;但对中、大克努森数流域,加速性能大幅度下降。     

弹丸速度的数字化激光幕测试技术

针对传统弹丸速度测量方法的局限,提出一种新的弹丸速度测试技术——数字化激光幕结合互相关速度测量算法的测试技术,并给出了激光总体测速方案、测速原理以及互相关测速方法,经靶场试验验证测试效果良好。     

飞机反区速度矢量不稳定及其控制的机理

在信号流图的基础上,提出多回路分析的方法,并用于研究反区时速度矢量不稳定及其稳定控制的机理。建立了纵向动力学的信号流图,并证明了一个回路的收敛性定理。在此基础上,通过理论分析得出了速度矢量不稳定在不同层面上的原因,也得出了速度和轨迹的发散度表达式等,并表明阻力-速度曲线、轨迹角-速度曲线、极曲线、阻力系数曲线等存在相互对应的反区和正区,并且阻力-速度曲线和轨迹角-速度曲线在斜率上成比例。研究得出进场动力补偿系统下速度矢量的稳定临界条件、收敛度、稳定机理等,理论分析和仿真比较了速度恒定进场动力补偿系统和迎角恒定进场动力补偿系统在控制性能上的差异。     

阻拦索张力控制方法

飞机阻拦装置是机场保证飞机正常降落和拦阻因意外原因冲出跑道的飞机的重要保障设施。针对现有机械型阻拦装置难以适应未来多种机型阻拦需求的现状,提出一种以阻拦电机为吸能元件的电磁阻拦装置,搭建考虑阻拦索弯折波影响在内的电磁阻拦装置模型,设计电磁阻拦装置的闭环控制算法,并利用仿真进行了验证。