溶胶一凝胶法制备二氧化钛及其转化为氮化钛的研究

本文以钛酸丁酯为原料，通过溶胶一凝胶法制备了ＴｉＯ２凝胶，在高温下烧结此凝胶得到ＴｉＯ２。将ＴｉＯ２粉末在９００°Ｃ以上用氨进行氮化，制得金黄色的氮化钛。通过使用热分析、色谱分析、扫描电镜及Ｘ一射线衍射等手段，研究并揭示了凝胶在陶瓷化生成ＴｉＯ２的过程中的化学反应，结晶及晶型随温度的变化规律。发现了氮化钛陶瓷的生成率与ＴｉＯ２溶胶的制备条件之间的关系。     

Buckling analysis of embedded graphene oxide powder-reinforced nanocomposite shells

In this study, the buckling analysis of a Graphene oxide powder reinforced (GOPR) nanocomposite shell is investigated. The effective material properties of the nanocomposite are estimated through Halpin-Tsai micromechanical scheme. Three distribution types of GOPs are considered, namely uniform, X and O. Also, a first-order shear deformation shell theory is incorporated with the principle of virtual work to derive the governing differential equations of the problem. The governing equations are solved via Galerkin's method, which is a powerful analytical method for static and dynamic problems. Comparison study is performed to verify the present formulation with those of previous data. New results for the buckling load of GOPR nanocomposite shells are presented regarding for different values of circumfer-ential wave number. Besides, the influences of weight fraction of nanofillers, length and radius to thickness ratios and elastic foundation on the critical buckling loads of GOP-reinforced nanocomposite shells are explored.     

Experimental investigation for machinability aspects of graphene oxide/carbon fiber reinforced polymer nanocomposites and predictive modeling using hybrid approach

This article explores the drilling behavior of polymer nanocomposites reinforced by Graphene oxide/Carbon fiber using a hybrid method of Grey theory and Principal component analysis (GR-PCA). An online digital dynamometer was employed for the evaluation of Thrust Force and Torque. The image processing technique computes the delamination. Response surface methodology (RSM) considers the parameters, namely, drilling speed (S), feed rate (F), Graphene Oxide wt.% (G) in designing the experimentation array. Principal component analysis (PCA) was used to tackle the response priority weight during the combination of multiple functions. Analysis of variance (ANOVA) scrutinized the influence of parameters and intended the regression models to predict the response. GR-PCA evaluated the optimal parametric setting and remarked that feed rate acts as the most predominant factor. The higher feed rate and wt.% of G is responsible for surface damages like fiber pull-out, fiber fracture and cracks. A significant improvement in drilling responses has been obtained and also validates through confirmatory test and microstructure investigations.     

铁红环氧酯涂层中缓蚀剂的研究

在有机涂层中加入缓蚀剂构成耐蚀涂层,可以进一步提高原涂层的耐蚀能力。本文研究了一种缓蚀剂HN(由H和N复配而成,H为杂环类,N为胺类),用在普通涂层—铁红环氧酯中试验。采用了四种方法:电化学交流阻抗法,盐雾箱试验法,人造海水浸泡,海上实船挂片,并分别与未加缓蚀剂的原涂层进行对比,对各涂层的耐蚀性能进行评定。结果表明:在铁红环氧酯中加入少量HN缓蚀剂后,在不改变原涂层附着力的情况下,明显提高了原涂层的耐蚀能力。     

超细粒子对环氧树脂的增韧改性研究

用NW-2辛酯偶联剂改性过的复合氧化锌(ZnO)超细粒子对环氧树脂进行增韧,借助于SEM和力学性能测试手段研究了ZnO粒子的形貌以及NW-2辛酯偶联剂改性复合ZnO粒子在环氧树脂体系中的增韧情况及其机理.结果表明:经过NW-2辛酯偶联剂改性的复合超细ZnO粒子对环氧树脂具备良好的增韧效果.     

带有氧化钨涂层的ITO平面电极在LB系列电解液中的阻抗分析

电致变色实验显示1 mol/L六氟磷酸锂与碳酸乙烯酯、碳酸二甲酯、碳酸二乙酯和碳酸甲乙酯所混合形成的电解液(LB)系列是一类非常节能的电致变色电解液,它们能用很小的充电电流(20μA/cm2)使得氧化钨薄膜获得更长久、更好的变色性.研究氧化钨薄膜在LB系列电解液中的交流阻抗特性,有助于更好地理解氧化钨薄膜的变色性能.文中研究了带有氧化钨薄膜层的ITO平面电极处于LB系列电解液中的阻抗谱,分别得出了氧化钨薄膜和ITO电极的等效电路;测算出氧化薄膜的常相位角元件、薄膜电阻、韦伯电阻以及与ITO电极有关的电双层电容和电极电荷转移电阻.证实了LB315是性能优良的电解液.     

子空间预测控制在固体氧化物燃料电池中的应用

为使固体氧化物燃料电池(SOFC)输出满足一定约束的稳定电压、提高其输出功率跟踪性能,采用文献中给出的SOFC动态模型,设计了基于子空间矩阵的预测控制器。将子空间辨识和预测控制算法结合起来,直接从开环输入输出数据获得预测控制器的控制矩阵,而不须经过中间参数模型辨识的步骤。仿真结果验证了所提子空间预测控制算法(SPC)的实用性。     

动态矩阵控制在固体氧化物燃料电池中的应用

提出将动态矩阵控制(DMC)算法用于固体氧化物燃料电池(SOFC)的控制。为此,在分析SOFC动态机理模型的基础上,建立了其阶跃响应模型。控制目标是使SOFC的输出电压始终保持在一定范围内,并收敛到恒定的数值。在实际应用中,这样的算法应能提高SOFC输出功率的跟踪性能。仿真结果验证了这种方法的有效性。     

zn及Zn／Si02复合添加剂的摩擦学性能

实验室自制了锂基润滑脂,通过四球试验研究zn作为锂基润滑脂添加剂在不同工况条件的摩擦学性能,利用光学显微镜和EDX分析了磨斑表面形貌及元素组成,探讨了zn的润滑作用机理,并对zn与SiO2不同复配方案的摩擦学性能进行了研究。结果表明：在低载荷条件,zn能更显著地提高锂基润滑脂的抗磨性能;在中高载荷条件,zn同时具有减摩抗磨性能,但对Pn值的提高没有太大帮助。EDX能谱分析表明磨斑表面存在特征zn元素,说明zn能够在摩擦表面沉积,形成摩擦学性能显著的表面润滑层;同时,zn与硬质颗粒SiO2在适宜的复配比例时具有一定的协同效应,能提高锂基润滑脂的摩擦学性能．     

Al2O3催化氧化脱除GB染毒空气的研究

以浸渍法制备的10%V／Al2O3为催化剂,研究对GB染毒空气的脱除效果,考察接触时间、温度、温度和浓度等因素对GB染毒空气脱除效果的影响,用GC-MS和LC-MS对尾气组分进行了检测分析．