| FeAlCrNbB金属间化合物复合涂层的制备与表征 |
| |
| 引用本文： | 梁秀兵,陈永雄,张志彬,郭伟,徐滨士. FeAlCrNbB金属间化合物复合涂层的制备与表征[J]. 装甲兵工程学院学报, 2010, 24(6) |
| |
| 作者姓名： | 梁秀兵 陈永雄 张志彬 郭伟 徐滨士 |
| |
| 作者单位： | 装甲兵工程学院装备再制造技术国防科技重点实验室 装甲兵工程学院科研部 北京工业大学材料学院 |
| |
| 基金项目： | 国家"863"计划项目，国家自然科学基金资助项目 |
| |
| 摘 要： | 研究开发了一种FeAlCrNbB新型喷涂粉芯丝材,并结合自动化高速电弧喷涂工艺制备了该材料的复合涂层,分析了涂层的常规力学性能、组织结构和油润滑条件下的滑动摩擦磨损性能,并和常规FeAl涂层进行了对比。结果显示:FeAlCrNbB涂层具有相对较高的显微硬度和拉伸结合强度、低的孔隙率,组织致密,形成了由Fe-Al金属间化合物相、氧化物以及少量非晶和纳米晶组成的复合结构,由于这种复合结构的材料特征,使涂层具备较好的耐磨损性能。
|
| 关 键 词： | Fe-Al金属间化合物 高速电弧喷涂 复合涂层 组织结构 性能 |
Preparation and Characterizing of the FeAlCrNbB Intermetallic Composite Coating |
| |
| LIANG Xiu-bing,CHEN Yong-xiong,ZHANG Zhi-bin,GUO Wei,XU Bin-shi. Preparation and Characterizing of the FeAlCrNbB Intermetallic Composite Coating[J]. Journal of Armored Force Engineering Institute, 2010, 24(6) |
| |
| Authors: | LIANG Xiu-bing CHEN Yong-xiong ZHANG Zhi-bin GUO Wei XU Bin-shi |
| |
| Affiliation: | 1(1.National Defense Key Laboratory for Remanufacturing Technology; Academy of Armored Force Engineering; Beijing 100072; China; 2.Department of Science Research; 3.School of Materials Science and Engineering; Beijing University of Technology; Beijing 100022; China); |
| |
| Abstract: | A new type of FeAlCrNbB cored wire is developed,and the intermetallic composite coating is prepared by using an automatic high velocity arc spraying technique.The general mechanical properties,microstructure and oil-lubricated sliding wear performance of the coating are investigated.The traditional FeAl coating is also investigated as a comparison.The results show that,as compared with the FeAl coating,the FeAlCrNbB composite coating is performed with higher micro-hardness and bonding strength,lower porosit... |
| |
| Keywords: | Fe-Al intermetallics high velocity arc spraying composite coating microstructure properties |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
