首页 | 本学科首页   官方微博 | 高级检索  
     

成膜树脂对防静电涂层高温电阻率影响研究
引用本文:刘朝辉,向雪梅,邓智平,周国柱. 成膜树脂对防静电涂层高温电阻率影响研究[J]. 后勤工程学院学报, 2011, 27(4): 64-67. DOI: 10.3969/j.issn.1672-7843.2011.04.014
作者姓名:刘朝辉  向雪梅  邓智平  周国柱
作者单位:后勤工程学院化学与材料工程系,重庆,401311
基金项目:总后勤部科研资助项目(X2010197)本文得到后勤工程学院学术创新基金资助
摘    要:采用石英灯加热、电阻率动态测试的方法,研究了成膜树脂对防静电涂层高温电阻率的影响.结果表明,成膜树脂对防静电涂层室温和高温表面电阻率都有明显影响.不同类型的树脂,其涂层表面电阻率升高的起始温度和电阻率峰值不同.单组分树脂起始温度低,峰值小;而双组分树脂起始温度高,峰值大.

关 键 词:防静电涂层  成膜树脂  高温电阻率

Study on the Influence of Film-forming Resin on the High Temperature Electric Resistivity of Anti-static Coating
LIU Zhao-hui,XIANG Xue-mei,ZHENG Zhi-ping,ZHOU Guo-zhu. Study on the Influence of Film-forming Resin on the High Temperature Electric Resistivity of Anti-static Coating[J]. Journal of Logistical Engineering University, 2011, 27(4): 64-67. DOI: 10.3969/j.issn.1672-7843.2011.04.014
Authors:LIU Zhao-hui  XIANG Xue-mei  ZHENG Zhi-ping  ZHOU Guo-zhu
Affiliation:(Dept.of Chemistry & Material Engineering,LEU,Chongqing 401311,China)
Abstract:The influence of film-forming resin on the high temperature electric resistivity of anti-static coating is undertaken by means of quartz-lamp heating and dynamically testing the resistivity.The results show that film-forming resin is of obvious impact on both room and high temperature electric resistivity of anti-static coating.Both the starting temperatures of the increasing of coating electric resistivity and the peak in electric resistivity curve differ from those of various kinds of resins.Single component resin enjoys low starting temperature and low peak value while double-component performs both characteristics of high values.
Keywords:anti-static coating  film-forming resin  high temperature electric resistivity
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号