| 铜冶炼炉溜槽上方钢梁温度分布研究 |
| |
| 引用本文： | 姜清悦. 铜冶炼炉溜槽上方钢梁温度分布研究[J]. 中国人民武装警察部队学院学报, 2014, 0(2): 94-96 |
| |
| 作者姓名： | 姜清悦 |
| |
| 作者单位： | 武警学院研究生队,河北廊坊065000 |
| |
| 基金项目： | 公安部应用创新计划项目（2008YYCXWJXY124） |
| |
| 摘 要： | 为了对有色冶炼厂房框架钢梁耐火稳定性评估提供条件,根据冶炼铜实际工况建立计算模型,数值研究钢梁温度分布,结果表明:在加热初期,钢梁的平均温度和最高温度不断上升,经历10个升温-降温周期后,钢梁的最高温度稳定在220℃左右。钢梁温度与梁的截面尺寸和形状、梁计算截面位置、溜槽与梁相对位置等众多因素有关。梁与溜槽距离越大,梁截面高度越大,翼缘宽度越小,最高温度与平均温度越低;梁长度大小不影响梁最高温度,但梁长度越大平均温度越低。
|
| 关 键 词： | 冶炼 钢梁 温度分布 |
A Research on the Temperature Distribution of a Girder Above a Chute in a Metallurgical Plant |
| |
| JIANG Qing-yue. A Research on the Temperature Distribution of a Girder Above a Chute in a Metallurgical Plant[J]. Journal of the Chinese People's Armed Police Force Academy, 2014, 0(2): 94-96 |
| |
| Authors: | JIANG Qing-yue |
| |
| Affiliation: | JIANG Qing - yue ( Team of Graduate Student, The Armed Police Academy, Lanffang, Hebei Province 065000, China) |
| |
| Abstract: | A calculation model was built based on metallurgical operating conditions and a numerical analysis of the girder temperature distribution was carried out for a stability assessment of a frame beam in a metallurgical plant. In conclusion：（ 1） The highest and average temperature of a girder constantly increase at initial stage. After 10 cycles, the highest temperature stabilize at 220 ℃.（ 2） The temperature relates to the size,the shape,the orientation of the girder cross-section and so on. The temperature of a girder lowers as the distance between the chute and the girder or the height of a girder cross-section grows,or the width of flange lessens. The length of a girder does not influence the highest temperature,but the average temperature lowers as it grows. |
| |
| Keywords: | metallurgy girder temperature distribution |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
