| 激光淬火渗硫复合层的抗高温摩擦磨损性能 |
| |
| 引用本文： | 张平,曾庆强,蔡志海,李奇. 激光淬火渗硫复合层的抗高温摩擦磨损性能[J]. 装甲兵工程学院学报, 2010, 24(1) |
| |
| 作者姓名： | 张平 曾庆强 蔡志海 李奇 |
| |
| 作者单位： | 1. 装甲兵工程学院,装备再制造技术国防科技重点实验室,北京,100072
2. 装甲兵工程学院,装备再制造技术国防科技重点实验室,北京,100072;75250部队,广东,广州,510800 |
| |
| 基金项目： | 国家自然科学基金资助项目 |
| |
| 摘 要： | 采用网格化激光淬火和低温离子渗硫技术对42MnCr52钢进行复合表面处理,使用洛氏硬度计、扫描电子显微镜、X射线衍射仪和能谱仪对表面改性层进行了表征分析,使用T11高温摩擦磨损试验机对复合处理前后的样品进行了高温摩擦磨损比较试验。结果表明:经激光淬火-离子渗硫复合处理后,在基材表面形成了激光淬火渗硫复合层,具有显著的抗高温摩擦磨损性能。与未处理样品相比较,硬度提高20%左右,摩擦因数降低约10%,磨损失重量减少50%以上。最后对激光淬火渗硫复合层的抗高温摩擦磨损机理进行了探讨分析。
|
| 关 键 词： | 激光淬火 低温离子渗硫 硫化亚铁 摩擦磨损 |
High Temperature Tribological Properties of Laser Quenching and Ion Sulphidized Composite Layer |
| |
| ZHANG Ping,ZENG Qing-qiang,CAI Zhi-hai,LI Qi. High Temperature Tribological Properties of Laser Quenching and Ion Sulphidized Composite Layer[J]. Journal of Armored Force Engineering Institute, 2010, 24(1) |
| |
| Authors: | ZHANG Ping ZENG Qing-qiang CAI Zhi-hai LI Qi |
| |
| Affiliation: | ZHANG Ping1,ZENG Qing-qiang1,2,CAI Zhi-hai1,LI Qi1(1.National Defense Key Laboratory for Remanufacturing Technology,Academy of Armored Force Engineering,Beijing 100072,China,2.Troop No.75250 of PLA,Guangzhou 510800,China) |
| |
| Abstract: | The grid laser-quenching and low temperature ion sulfurized composite treatment technology is employed on the composite surface disposal of 42MnCr52 steel. The structure, composition, surface morphology and hardness of the composite layer are tested with XRD, EDS, SEM and Rockwell apparatus respectively. T11 tribological tester is used to measure the friction-reducing and wear-resistant properties of the composite layer. The experimental results show that laser-quenching and ion sulfurized composite surface... |
| |
| Keywords: | laser quenching low temperature ion sulfurized ferrous sulfide friction and wear |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
