首页 | 本学科首页   官方微博 | 高级检索  
   检索      

防护墙抗金属射流侵彻最佳防护距离研究
引用本文:赵明哲,高兴勇,巩永孝.防护墙抗金属射流侵彻最佳防护距离研究[J].军械工程学院学报,2009,21(4):33-35.
作者姓名:赵明哲  高兴勇  巩永孝
作者单位:[1]军械工程学院弹药工程系,河北石家庄050003 [2]北京理工大学爆炸科学与技术国家重点实验室,北京100081
摘    要:炸高对聚能射流的侵彻作用影响很大,尤其在大炸高的情况下,射流很容易出现断裂和径向分散,其侵彻能力将显著降低。通过对射流形成、运动和侵彻过程的分析,得出了比较合理的防护墙抗金属射流的安全防护距离,可以为防护工程的设计提供参考。

关 键 词:防护墙  金属射流  防护距离

Research on the Optimum Protection Distance for Anti-metal-jet with Protecting Wall
ZHAO Ming-zhe,GAO Xing-yong,GONG Yong-xiao.Research on the Optimum Protection Distance for Anti-metal-jet with Protecting Wall[J].Journal of Ordnance Engineering College,2009,21(4):33-35.
Authors:ZHAO Ming-zhe  GAO Xing-yong  GONG Yong-xiao
Institution:1. Department of Ammunition Engineering, Ordnance Engineering College, Shijiazhuang 050003, China ; 2. State Key Laboratory of Explosion Science and Technology,Beijing Institute of Technology,Beijing 100081 ,China)
Abstract:The standoff distance has an enormous influence on the penetration of metal-jet, especially in the case of large standoff. The metal-jet is very easy to split and disperse in diameter, and this will lower its penetration ability obviously. In this paper an optimum protection distance for anti-metal-jet with protecting wall has been made out by analyzing the formation, notion and penetration of the metal-jet.
Keywords:protecting wall  metal-jet  protection distance
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号