Norms,Military Utility,and the Use/Non-use of Weapons: The Case of Anti-plant and Irritant Agents in the Vietnam War

The role of norms and military utility in the use of weapons is disputed by constructivist and realist scholars. Through an examination of US decision-making regarding anti-plant and irritant agents in the Vietnam War, I advance this debate in three key ways. First, I develop structural realism’s expectations regarding the role of military utility. Second, I demonstrate that social and material factors are at play in our understandings of both ‘norms’ and ‘military utility’, and that both played a role in US decisions. Third, I find that the dominant role – as structural realism expects – was played by military utility.     

Optimal nonmyopic gambling strategy for the generalized Kelly criterion

We consider the optimal wagers to be made by a gambler who starts with a given initial wealth. The gambler faces a sequence of two-outcome games, i.e., “win” vs. “lose,” and wishes to maximize the expected value of his terminal utility. It has been shown by Kelly, Bellman, and others that if the terminal utility is of the form log x, where x is the terminal wealth, then the optimal policy is myopic, i.e., the optimal wager is always to bet a constant fraction of the wealth provided that the probability of winning exceeds the probability of losing. In this paper we provide a critique of the simple logarithmic assumption for the utility of terminal wealth and solve the problem with a more general utility function. We show that in the general case, the optimal policy is not myopic, and we provide analytic expressions for optimal wager decisions in terms of the problem parameters. We also provide conditions under which the optimal policy reduces to the simple myopic case. © 1997 John Wiley & Sons, Inc. Naval Research Logistics 44: 639–654, 1997     

An analytical evaluation of optimal solution value estimation procedures

The estimation of optimal solution values for large-scale optimization problems is studied. Optimal solution value estimators provide information about the deviation between the optimal solution and the heuristic solution. Some estimation techniques combine heuristic solutions with randomly generated solutions. In particular, we examine a class of jacknife-based estimators which incorporate any heuristic solution value with the two best randomly generated solution values. The primary contribution of this article is that we provide a framework to analytically evaluate a class of optimal solution value estimators. We present closed-form results on the relationship of heuristic performance, sample size, and the estimation errors for the case where the feasible solutions are uniformly distributed. In addition, we show how to compute the estimation errors for distributions other than uniform given a specific sample size. We use a triangular and an exponential distribution as examples of other distributions. A second major contribution of this article is that, to a large extent, our analytical results confirm previous computational results. In particular, the best estimator depends on how good the heuristic is, but seems to be independent of the underlying distribution of solution values. Furthermore, there is essentially an inverse relationship between the heuristic performance and the performance of any estimator. © 1994 John Wiley & Sons, Inc.     

Cost analysis of warranty policies

This article analyzes two general warranty policies involving an initial free replacement period, followed by a pro rata period. We examine the short-run total costs and longrun average costs under these policies. Formulas for both consumer costs and manufacturer profits under warranty are derived. We also study the expected number of purchases over the product life cycle under both policies. Bounds for the expected total costs and expected number of purchases are obtained for the case where the failure distribution of the item is new better than used.     

Discrete equal‐capacity p‐median problem

This paper examines the discrete equal‐capacity p‐median problem that seeks to locate p new facilities (medians) on a network, each having a given uniform capacity, in order to minimize the sum of distribution costs while satisfying the demand on the network. Such problems arise, for example, in local access and transport area telecommunication network design problems where any number of a set of p facility units can be constructed at the specified candidate sites (hence, the net capacity is an integer multiple of a given unit capacity). We develop various valid inequalities, a separation routine for generating cutting planes that are specific members of such inequalities, as well as an enhanced reformulation that constructs a partial convex hull representation that subsumes an entire class of valid inequalities via its linear programming relaxation. We also propose suitable heuristic schemes for this problem, based on sequentially rounding the continuous relaxation solutions obtained for the various equivalent formulations of the problem. Extensive computational results are provided to demonstrate the effectiveness of the proposed valid inequalities, enhanced formulations, and heuristic schemes. The results indicate that the proposed schemes for tightening the underlying relaxations play a significant role in enhancing the performance of both exact and heuristic solution methods for this class of problems. © 2000 John & Sons, Inc. Naval Research Logistics 47: 166–183, 2000.     

One- and two-sided sampling plans based on the exponential distribution

In this paper we examine the one- and two-sided sampling plans for the exponential distribution. Solutions are provided for several situations arising out of the assumptions on the knowledge of the parameters of the distribution. The values of the constants are tabled in the special case of p₁ = p₂ for the two-sided plans.     

A Criterion for Settling Inconsistencies in Clausewitz’s On War

On War’s unfinished state has been a source of difficulties for interpretation for 180 years. By establishing a hierarchy of revision among the parts, we propose a criterion that can bring any part of On War in line with the most advanced stage of Clausewitz’s thinking. We exemplify the utility, illustrate the underpinnings and appreciate the potential of this criterion. We argue that the criterion offers the prospect of a shared, coherent, fully consistent and faithful rendering of Clausewitz’s theory of war.     

Scheduling jobs with random processing times on a single machine subject to stochastic breakdowns to minimize early-tardy penalties

We examine the problem of scheduling n jobs with a common due date on a single machine. The processing time of each job is a random variable, which follows an arbitrary distribution with a known mean and a known variance. The machine is not reliable; it is subject to stochastic breakdowns. The objective is to minimize the expected sum of squared deviations of job completion times from the due date. Two versions of the problem are addressed. In the first one the due date is a given constant, whereas in the second one the due date is a decision variable. In each case, a general form of the deterministic equivalent of the stochastic scheduling problem is obtained when the counting process related to the machine uptime distribution is a generalized Poisson process. A sufficient condition is derived under which optimal sequences are V-shaped with respect to mean processing times. Other characterizations of optimal solutions are also established. Based on the optimality properties, algorithms with pseudopolynomial time complexity are proposed to solve both versions of the problem. © 1996 John Wiley & Sons, Inc.     

An indicator of combat success

Assessing the effects of changes in weapons systems or battle tactics is difficult because of the variations in battles and the resulting instability of measures of combat effectiveness. Even under the relatively stable conditions of designed combat exercises, traditional measures may fail to reflect important battle events and dynamics. This variation in results makes the design, conduct, and evaluation of combat experiments, combat simulations, and combat training exercises a challenging endeavor, indeed. We develop and examine a combat measure of effectiveness, based on Lanchester models, which we call the battle trace. The battle trace is a measure of ongoing battle results, measured as a function of time into the battle. We describe how such measures might contribute to assessing effects of changing certain battle parameters. We suggest applications of these ideas to developing combat simulations and to enhancing combat training exercises.     

Modified fictitious play

We describe a modification of Brown's fictitious play method for solving matrix (zero-sum two-person) games and apply it to both symmetric and general games. If the original game is not symmetric, the basic idea is to transform the given matrix game into an equivalent symmetric game (a game with a skew-symmetric matrix) and use the solution properties of symmetric games (the game value is zero and both players have the same optimal strategies). The fictitious play method is then applied to the enlarged skew-symmetric matrix with a modification that calls for the periodic restarting of the process. At restart, both players' strategies are made equal based on the following considerations: Select the maximizing or minimizing player's strategy that has a game value closest to zero. We show for both symmetric and general games, and for problems of varying sizes, that the modified fictitious play (MFP) procedure approximates the value of the game and optimal strategies in a greatly reduced number of iterations and in less computational time when compared to Brown's regular fictitious play (RFP) method. For example, for a randomly generated 50% dense skew-symmetric 100 × 100 matrix (symmetric game), with coefficients |a_ij| ≤ 100, it took RFP 2,652,227 iterations to reach a gap of 0.03118 between the lower and upper bounds for the game value in 70.71 s, whereas it took MFP 50,000 iterations to reach a gap of 0.03116 in 1.70 s. Improved results were also obtained for general games in which the MFP solves a much larger equivalent symmetric game. © 1996 John Wiley & Sons, Inc.     

低功率霍尔推力器阳极供气环工程设计关键参数仿真

为了提高低功率霍尔推力器放电通道内中性原子分布均匀性,采用有限元方法对阳极供气环关键结构参数进行优化研究。针对双腔式阳极供气环结构,重点分析了缓冲腔容积比以及缓冲腔隔板导流小孔数量等关键参数对阳极供气均匀性的影响。研究结果表明:随着缓冲腔容积比的增大,阳极供气环出气孔差异率先快速减小后趋于稳定,其中当容积率k=1.0时,平均差异率和最大差异率分别为1.77%和3.79%;隔板间导流小孔数量从8增加到14时,出气孔差异率呈现浴盆曲线特性,其中导流孔数量为10时,平均差异率和最大差异率分别为1.8%和3.8%。研究结果可为霍尔推力器阳极供气环工程设计提供理论支撑。     

Using a birth‐and‐death process to estimate the steady‐state distribution of a periodic queue

If the number of customers in a queueing system as a function of time has a proper limiting steady‐state distribution, then that steady‐state distribution can be estimated from system data by fitting a general stationary birth‐and‐death (BD) process model to the data and solving for its steady‐state distribution using the familiar local‐balance steady‐state equation for BD processes, even if the actual process is not a BD process. We show that this indirect way to estimate the steady‐state distribution can be effective for periodic queues, because the fitted birth and death rates often have special structure allowing them to be estimated efficiently by fitting parametric functions with only a few parameters, for example, 2. We focus on the multiserver M_t/GI/s queue with a nonhomogeneous Poisson arrival process having a periodic time‐varying rate function. We establish properties of its steady‐state distribution and fitted BD rates. We also show that the fitted BD rates can be a useful diagnostic tool to see if an M_t/GI/s model is appropriate for a complex queueing system. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 664–685, 2015     

A stochastic constrained optimal replacement model

In this paper a stochastically constrained replacement model is formulated. This model determines a sequence of replacement dates such that the total “current account” cost of all future costs and capital expenditures over an infinite time horizon for the n initial incumbent machines is minimized subject to the constraints that an expected number of machines are in a chosen utility class at any point in time. We then indicate one possible solution method for the model.     

On excess-, current-, and total-life distributions of phase-type renewal processes

Consider a renewal process whose interrenewal-time distribution is phase type with representation (α, T). We show that the (time-dependent) excess-life distribution is phase type with representation (α′, T), where α′ is an appropriately modified initial probability vector. Using this result, we derive the (time-dependent) distributions for the current life and the total life of the phase-type renewal process. They in turn enable us to obtain the equilibrium distributions for the three random variables. These results simplify the computation of the respective distribution functions and consequently enhance the potential use of renewal theory in stochastic modeling—particularly in inventory, queueing, and reliability applications. © 1992 John Wiley & Sons, Inc.     

Signature based analysis of m‐Consecutive‐k‐out‐of‐n: F systems with exchangeable components

In this article, we study reliability properties of m‐consecutive‐k‐out‐of‐n: F systems with exchangeable components. We deduce exact formulae and recurrence relations for the signature of the system. Closed form expressions for the survival function and the lifetime distribution as a mixture of the distribution of order statistics are established as well. These representations facilitate the computation of several reliability characteristics of the system for a given exchangeable joint distribution or survival function. Finally, we provide signature‐based stochastic ordering results for the system's lifetime and investigate the IFR preservation property under the formulation of m‐consecutive‐k‐out‐of‐n: F systems. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

Reserve forces and the transformation of British military organisation: soldiers,citizens and society

In recent years, there has been a sharp growth in political and sociological interest in the British military. Set against the backdrop of the armed forces’ increasing presence in everyday life, alongside the organizations’ ongoing restructuring, the current paper focuses on the MoD’s problematic attempts to recruit 30,000 reservists by 2020; what has become known as the Future Reserves 2020 programme (FR2020). We argue that these changes are driven in part by the need to cut costs in defence. However, we also suggest that they are a reflection of the changing nature of modern military organisation, and the manner in which armed forces engage with the societies of which they are a part, and with the citizens that make up that society. We locate FR2020 programme in the context of a wider narrative about the changing nature of military organisation in contemporary western democracies, identifying structural, circumstantial and normative reasons for change. We also examine the specific challenges of implementing FR2020 in practice, including issues of recruitment and retention, integration and support, and relations with families and employers, drawing on the experience of comparator countries to do so. We conclude by considering the implications of these changes, both for the future of UK armed forces, and for the evolving nature of military-society relations in Britain.     

A characterization of the wald distribution

Suppose X is a random variable having an absolutely continuous distribution function F(x). We assume that F(x) has the Wald distribution. A relation between the probability density function of X⁻¹ with that of X is used to characterize the Wald distribution.     

Component importance for linear consecutive‐ k ‐Out‐of‐ n and m ‐Consecutive‐ k ‐Out‐of‐ n systems with exchangeable components

Measuring the relative importance of components in a mechanical system is useful for various purposes. In this article, we study Birnbaum and Barlow‐Proschan importance measures for two frequently studied system designs: linear consecutive k ‐out‐of‐ n and m ‐consecutive‐ k ‐out‐of‐ n systems. We obtain explicit expressions for the component importance measures for systems consisting of exchangeable components. We illustrate the results for a system whose components have a Lomax type lifetime distribution. © 2013 Wiley Periodicals, Inc. Naval Research Logistics, 2013     

Applications of renewal theory in analysis of the free-replacement warranty

Under a free-replacement warranty of duration W, the customer is provided, for an initial cost of C, as many replacement items as needed to provide service for a period W. Payments of C are not made at fixed intervals of length W, but in random cycles of length Y = W + γ(W), where γ(W) is the (random) remaining life-time of the item in service W time units after the beginning of a cycle. The expected number of payments over the life cycle, L, of the item is given by M_Y(L), the renewal function for the random variable Y. We investigate this renewal function analytically and numerically and compare the latter with known asymptotic results. The distribution of Y, and hence the renewal function, depends on the underlying failure distribution of the items. Several choices for this distribution, including the exponential, uniform, gamma and Weibull, are considered.     

The “signature” of a coherent system and its application to comparisons among systems

Various methods and criteria for comparing coherent systems are discussed. Theoretical results are derived for comparing systems of a given order when components are assumed to have independent and identically distributed lifetimes. All comparisons rely on the representation of a system's lifetime distribution as a function of the system's “signature,” that is, as a function of the vector p= (p₁, … , p_n), where p_i is the probability that the system fails upon the occurrence of the ith component failure. Sufficient conditions are provided for the lifetime of one system to be larger than that of another system in three different senses: stochastic ordering, hazard rate ordering, and likelihood ratio ordering. Further, a new preservation theorem for hazard rate ordering is established. In the final section, the notion of system signature is used to examine a recently published conjecture regarding componentwise and systemwise redundancy. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 507–523, 1999