Suboptimal ordering policies under the full cost criterion

This note extends some previous work in dependent inventory models previously studied by the author. A comparison is given between optimal policies under the shortage probability criterion and a class of suboptimal policies using the usual cost minimization criterion.     

Multi-class inventory models with demand a function of inventory level

This paper considers the problem of maintaining an inventory of an item which can deteriorate and become useless. A periodic review procedure is used and new items ordered may experience a time lag in delivery. Items are considered to deteriorate through one or two states before becoming useless. Thus the deterioration process in each period plays the role of the usual demand process and is a function of the inventory level at the beginning of each period. For the case of no time lag in delivery, one stage deterioration, and either binomial or uniform deterioration, optimal ordering policies are obtained for the n-period dynamic model with the standard cost structure. (For the shortage probability criterion see the other paper by Iglehart and Jaquette, in this issue.) These policies are of the single critical number type. For more complicated models suboptimal policies of this same type are found.     

Redundant spares allocation to reduce reliability costs

The problem considered here is the optimal selection of the inventory of spares for a system built from two kinds of modules, the larger of which can be connected so it performs the role of the smaller one. The optimal inventory is the least costly one which achieves a specified probability that the spares will not be exhausted over the design lifetime. For some costs and failure rates it is most economical to use the larger module for both roles, due to the resulting increase in flexibility in the deployment of a single type of spare module. Both analytical and simulation methods have been used to study this problem.     

Probabilistic solution and bounds for serial inventory systems with discounted and average costs

We consider the infinite horizon serial inventory system with both average cost and discounted cost criteria. The optimal echelon base‐stock levels are obtained in terms of only probability distributions of leadtime demands. This analysis yields a novel approach for developing bounds and heuristics for optimal inventory control polices. In addition to deriving the known bounds in literature, we develop several new upper bounds for both average cost and discounted cost models. Numerical studies show that the bounds and heuristic are very close to optimal.© 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

Pricing and inventory management during new product introduction when shortage creates hype

In this study, we analyze the joint pricing and inventory management during new product introduction when product shortage creates additional demand due to hype. We develop a two‐period model in which a firm launches its product at the beginning of the first period, before it observes sales in the two periods. The product is successful with an exogenous probability, or unsuccessful with the complementary probability. The hype in the second period is observed only when the product is successful. The firm learns the actual status of the product only after observing the first‐period demand. The firm must decide the stocking level and price of the product jointly at the beginning of each of the two periods. In this article, we derive some structural properties of the optimal prices and inventory levels, and show that (i) firms do not always exploit hype, (ii) firms do not always increase the price of a successful product in the second period, (iii) firms may price out an unsuccessful product in the first period if the success probability is above a threshold, and (iv) such a threshold probability is decreasing in the first‐period market potential of the successful product. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 304–320, 2015     

An optimal critical level policy for inventory systems with two demand classes

Traditional inventory systems treat all demands of a given item equally. This approach is optimal if the penalty costs of all customers are the same, but it is not optimal if the penalty costs are different for different customer classes. Then, demands of customers with high penalty costs must be filled before demands of customers with low penalty costs. A commonly used inventory policy for dealing with demands with different penalty costs is the critical level inventory policy. Under this policy demands with low penalty costs are filled as long as inventory is above a certain critical level. If the inventory reaches the critical level, only demands with high penalty costs are filled and demands with low penalty costs are backordered. In this article, we consider a critical level policy for a periodic review inventory system with two demand classes. Because traditional approaches cannot be used to find the optimal parameters of the policy, we use a multidimensional Markov chain to model the inventory system. We use a sample path approach to prove several properties of this inventory system. Although the cost function is not convex, we can build on these properties to develop an optimization approach that finds the optimal solution. We also present some numerical results. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

Deterministic inventory lot‐size models under inflation with shortages and deterioration for fluctuating demand

In this paper, we extend the inventory lot‐size models to allow for inflation and fluctuating demand (which is more general than constant, increasing, decreasing, and log‐concave demand patterns). We prove that the optimal replenishment schedule not only exists but is also unique. Furthermore, we show that the total cost associated with the inventory system is a convex function of the number of replenishments. Hence, the search for the optimal number of replenishments is simplified to finding a local minimum. Finally, several numerical examples are provided to illustrate the results. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48: 144–158, 2001     

Optimal ordering policies when anticipating parameter changes in EOQ systems

The classical Economic Order Quantity Model requires the parameters of the model to be constant. Some EOQ models allow a single parameter to change with time. We consider EOQ systems in which one or more of the cost or demand parameters will change at some time in the future. The system we examine has two distinct advantages over previous models. One obvious advantage is that a change in any of the costs is likely to affect the demand rate and we allow for this. The second advantage is that often, the times that prices will rise are fairly well known by announcement or previous experience. We present the optimal ordering policy for these inventory systems with anticipated changes and a simple method for computing the optimal policy. For cases where the changes are in the distant future we present a myopic policy that yields costs which are near-optimal. In cases where the changes will occur in the relatively near future the optimal policy is significantly better than the myopic policy.     

Computation of constrained optimum quantities and reorder points for time-weighted backorder penalties

The purpose of this paper and the accompanying tables is to facilitate the calculation of constrained optimum order quantities and reorder points for an inventory control system where the criterion of optimality is the minimization of expected inventory holding, ordering, and time-weighted backorder costs. The tables provided in the paper allow the identification of the optimal solution when order quantities and/or reorder points are restricted to a set of values which do not include the unconstrained optimal solution.     

Dynamic learning,pricing, and ordering by a censored newsvendor

We address the problem of determining optimal ordering and pricing policies in a finite‐horizon newsvendor model with unobservable lost sales. The demand distribution is price‐dependent and involves unknown parameters. We consider both the cases of perishable and nonperishable inventory. A very general class of demand functions is studied in this paper. We derive the optimal ordering and pricing policies as unique functions of the stocking factor (which is a linear transformation of the safety factor). An important expression is obtained for the marginal expected value of information. As a consequence, we show when lost sales are unobservable, with perishable inventory the optimal stocking factor is always at least as large as the one given by the single‐period model; however, if inventory is nonperishable, this result holds only under a strong condition. This expression also helps to explain why the optimal stocking factor of a period may not increase with the length of the problem. We compare this behavior with that of a full information model. We further examine the implications of the results to the special cases when demand uncertainty is described by additive and multiplicative models. For the additive case, we show that if demand is censored, the optimal policy is to order more as well as charge higher retail prices when compared to the policies in the single‐period model and the full information model. We also compare the optimal and myopic policies for the additive and multiplicative models. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

An inventory problem with obsolescence

A stochastic single product convex cost inventory problem is considered in which there is a probability, π_j, that the product will become obsolete in the future period j. In an interesting paper, Barankin and Denny essentially formulate the model, but do not describe some of its interesting and relevant ramifications. This paper is written not only to bring out some of these ramifications, but also to describe some computational results using this model. The computational results show that if obsolescence is a distinct possibility in the near future, it is quite important that the probabilities of obsolescence be incorporated into the model before computing the optimal policies.     

An adaptive forecasting algorithm and inventory policy for products with short life cycles

Products with short life cycles are becoming increasingly common in many industries, such as the personal computer (PC) and mobile phone industries. Traditional forecasting methods and inventory policies can be inappropriate for forecasting demand and managing inventory for a product with a short life cycle because they usually do not take into account the characteristics of the product life cycle. This can result in inaccurate forecasts, high inventory cost, and low service levels. Besides, many forecasting methods require a significant demand history, which is available only after the product has been sold for some time. In this paper, we present an adaptive forecasting algorithm with two characteristics. First, it uses structural knowledge on the product life cycle to model the demand. Second, it combines knowledge on the demand that is available prior to the launch of the product with actual demand data that become available after the introduction of the product to generate and update demand forecasts. Based on the forecasting algorithm, we develop an optimal inventory policy. Since the optimal inventory policy is computationally expensive, we propose three heuristics and show in a numerical study that one of the heuristics generates near‐optimal solutions. The evaluation of our approach is based on demand data from a leading PC manufacturer in the United States, where the forecasting algorithm has been implemented. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004.     

Optimal disposal policies for a single-item inventory system with returns

We consider a single-item inventory system in which the stock level can increase due to items being returned as well as decrease when demands occur. Returned items can be repaired and then used to satisfy future demand, or they can be disposed of. We identify those inventory levels where disposal is the best policy. It is shown that this problem is equivalent to a problem of controlling a single-server queue. When the return and demand processes are both Poisson, we find the optimal policy exactly. When the demand and return processes are more general, we use diffusion approximations to obtain an approximate model, which is then solved. The approximate model requires only mean and variance data. Besides the optimal policy, the output of the models includes such characteristics as the operating costs, the purchase rate for new items, the disposal rate for returned items and the average inventory level. Several numerical examples are given. An interesting by-product of our investigation is an approximation for the steady-state behavior of the bulk GI/G/1 queue with a queue limit.     

Degeneracy in inventory models

In order‐quantity reorder‐point formulations for inventory items where backordering is allowed, some of the more common ways to prevent excessive stockouts in an optimal solution are to impose either a cost per unit short, a cost per stockout occasion, or a target fill rate. We show that these popular formulations, both exact and approximate, can become “degenerate” even with quite plausible parameters. By degeneracy we mean any situation in which the formulation either cannot be solved, leads to nonsensical “optimal” solutions, or becomes equivalent to something substantially simpler. We explain the reasons for the degeneracies, yielding new insight into these models, and we provide practical advice for inventory managers. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 686–705, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10037     

Economic ordering decisions with market choice flexibility

Standard approaches to classical inventory control problems treat satisfying a predefined demand level as a constraint. In many practical contexts, however, total demand is comprised of separate demands from different markets or customers. It is not always clear that constraining a producer to satisfy all markets is an optimal approach. Since the inventory‐related cost of an item depends on total demand volume, no clear method exists for determining a market's profitability a priori, based simply on per unit revenue and cost. Moreover, capacity constraints often limit a producer's ability to meet all demands. This paper presents models to address economic ordering decisions when a producer can choose whether to satisfy multiple markets. These models result in a set of nonlinear binary integer programming problems that, in the uncapacitated case, lend themselves to efficient solution due to their special structure. The capacitated versions can be cast as nonlinear knapsack problems, for which we propose a heuristic solution approach that is asymptotically optimal in the number of markets. The models generalize the classical EOQ and EPQ problems and lead to interesting optimization problems with intuitively appealing solution properties and interesting implications for inventory and pricing management. © 2003 Wiley Periodicals, Inc. Naval Research Logistics, 2004.     

Newsvendor bounds and heuristics for serial supply chains with regular and expedited shipping

We study an infinite‐horizon, N‐stage, serial production/inventory system with two transportation modes between stages: regular shipping and expedited shipping. The optimal inventory policy for this system is a top–down echelon base‐stock policy, which can be computed through minimizing 2N nested convex functions recursively (Lawson and Porteus, Oper Res 48 (2000), 878–893). In this article, we first present some structural properties and comparative statics for the parameters of the optimal inventory policies, we then derive simple, newsvendor‐type lower and upper bounds for the optimal control parameters. These results are used to develop near optimal heuristic solutions for the echelon base‐stock policies. Numerical studies show that the heuristic performs well. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

On the solution of some approximate continuous review inventory models

This article compares two types of approximating strategies for solving some continuous review inventory models noniteratively. One of these strategies is to approximate the normalized loss integral by an exponential function whereas the other strategy is to estimate the loss integral as a quadratic function of the right-tail probability. It is found that the latter method is significantly more accurate and versatile than the former method. Theoretical arguments are given to emphasize that both the right-tail probability and the loss integral are key functions involved in those models. Therefore, a good strategy should be not only to estimate these two functions, but also to retain the interrelationships between them. The quadratic method is better than the exponential method primarily because of the latter property.     

Optimal joint preventive maintenance and production policies

We study joint preventive maintenance (PM) and production policies for an unreliable production‐inventory system in which maintenance/repair times are non‐negligible and stochastic. A joint policy decides (a) whether or not to perform PM and (b) if PM is not performed, then how much to produce. We consider a discrete‐time system, formulating the problem as a Markov decision process (MDP) model. The focus of the work is on the structural properties of optimal joint policies, given the system state comprised of the system's age and the inventory level. Although our analysis indicates that the structure of optimal joint policies is very complex in general, we are able to characterize several properties regarding PM and production, including optimal production/maintenance actions under backlogging and high inventory levels, and conditions under which the PM portion of the joint policy has a control‐limit structure. In further special cases, such as when PM set‐up costs are negligible compared to PM times, we are able to establish some additional structural properties. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005.     

Spares stocking policies for repairable items with dependent repair times

This paper analyzes the problem of determining desirable spares inventory levels for repairable items with dependent repair times. The problem is important for repairable products such as aircraft engines which can have very large investment in spares inventory levels. While existing models can be used to determine optimal inventory spares levels when repair times are independent, the practical considerations of limited repair shop capacity and prioritized shop dispatching rules combine to make repair times not independent of one another. In this research a simulation model of a limited capacity repair facility with prioritized scheduling is used to explore a variety of heuristic approaches to the spares stocking decision. The heuristics are also compared with use of a model requiring independent repair times (even though that assumption is not valid here). The results show that even when repair time dependencies are present, the performance of a model which assumes independent repair times is quite good.     

A two-station stochastic inventory model with exact methods of computing optimal policies

A method is presented for calculating optimal inventory levels in a two-station transactions reporting inventory system. The criterion of optimality is the minimization of expected cost. The computational properties of the model are stressed and the solution method is precise. It is shown that when the model represents a central warehouse which supplies several retail outlets, stocks carried at the central location affect the capacity of the system to handle orders. Stocks carried at the retail level affect only the size of the retail order backlog.