Spares stocking policies for repairable items with dependent repair times

This paper analyzes the problem of determining desirable spares inventory levels for repairable items with dependent repair times. The problem is important for repairable products such as aircraft engines which can have very large investment in spares inventory levels. While existing models can be used to determine optimal inventory spares levels when repair times are independent, the practical considerations of limited repair shop capacity and prioritized shop dispatching rules combine to make repair times not independent of one another. In this research a simulation model of a limited capacity repair facility with prioritized scheduling is used to explore a variety of heuristic approaches to the spares stocking decision. The heuristics are also compared with use of a model requiring independent repair times (even though that assumption is not valid here). The results show that even when repair time dependencies are present, the performance of a model which assumes independent repair times is quite good.     

Optimal spares for stochastically failing equipment

A mathematical model is formulated for determining the number of spare components to purchase when components stochastically fail according to a known life distribution function and there is a cost incurred when a component is replaced. Bounds are determined for the optimal inventory which indicate that the inclusion of the replacement cost lowers the optimal inventory. Since these bounds are no easier to calculate than the optimal spares level, the theory is specialized to components with exponentially distributed time to failure. Procedures are given for calculating the optimal spares level, and numerical examples are provided.     

多级可修备件库存的生灭过程建模与优化

针对VARI-METRIC模型在低可用度下结果不准确的问题,建立基于生灭过程的任意等级、任意层级可修件库存优化模型。通过对各级站点、各类备件需求率与到达率的预测,对每个部件建立其生灭过程模型,并提出基于生灭过程的装备可用度计算方法。以整个保障系统的装备可用度为约束指标,以备件总购置费最低为目标,利用边际算法得到最优备件配置方案,并建立仿真模型对所得优化方案进行评估与调整。结合算例,以仿真结果作为检验标准,选取权威的VMETRIC软件与该解析模型在优化性能、计算精度及适用性上进行对比和说明。结果表明,无论是解析模型还是VMETRIC软件,均存在一定的适用范围,而采用解析与仿真相结合的方法无疑具有更强的适应性。     

Maintaining systems with heterogeneous spare parts

We consider the problem of optimally maintaining a stochastically degrading, single‐unit system using heterogeneous spares of varying quality. The system's failures are unannounced; therefore, it is inspected periodically to determine its status (functioning or failed). The system continues in operation until it is either preventively or correctively maintained. The available maintenance options include perfect repair, which restores the system to an as‐good‐as‐new condition, and replacement with a randomly selected unit from the supply of heterogeneous spares. The objective is to minimize the total expected discounted maintenance costs over an infinite time horizon. We formulate the problem using a mixed observability Markov decision process (MOMDP) model in which the system's age is observable but its quality must be inferred. We show, under suitable conditions, the monotonicity of the optimal value function in the belief about the system quality and establish conditions under which finite preventive maintenance thresholds exist. A detailed computational study reveals that the optimal policy encourages exploration when the system's quality is uncertain; the policy is more exploitive when the quality is highly certain. The study also demonstrates that substantial cost savings are achieved by utilizing our MOMDP‐based method as compared to more naïve methods of accounting for heterogeneous spares.     

Some approximations in multi-item,multi-echelon inventory systems for recoverable items

The optimization problem as formulated in the METRIC model takes the form of minimizing the expected number of total system backorders in a two-echelon inventory system subject to a budget constraint. The system contains recoverable items – items subject to repair when they fail. To solve this problem, one needs to find the optimal Lagrangian multiplier associated with the given budget constraint. For any large-scale inventory system, this task is computationally not trivial. Fox and Landi proposed one method that was a significant improvement over the original METRIC algorithm. In this report we first develop a method for estimating the value of the optimal Lagrangian multiplier used in the Fox-Landi algorithm, present alternative ways for determining stock levels, and compare these proposed approaches with the Fox-Landi algorithm, using two hypothetical inventory systems – one having 3 bases and 75 items, the other 5 bases and 125 items. The comparison shows that the computational time can be reduced by nearly 50 percent. Another factor that contributes to the higher requirement for computational time in obtaining the solution to two-echelon inventory systems is that it has to allocate stock optimally to the depot as well as to bases for a given total-system stock level. This essentially requires the evaluation of every possible combination of depot and base stock levels – a time-consuming process for many practical inventory problems with a sizable system stock level. This report also suggests a simple approximation method for estimating the optimal depot stock level. When this method was applied to the same two hypotetical inventory systems indicated above, it was found that the estimate of optimal depot stock is quite close to the optimal value in all cases. Furthermore, the increase in expected system backorders using the estimated depot stock levels rather than the optimal levels is generally small.     

Queueing models for spares provisioning

A population of items which break down at random times and require repair is studied (the classic “machine repair problem with spares”). It is desired to determine the number of repair channels and spares required over a multiyear planning horizon in which population size and component reliability varies, and a service level constraint is imposed. When an item fails, a spare (if available) is immediately dispatched to replace the failed item. The failed item is removed, transported to the repair depot, repaired, and then placed in the spares pool (which is constrained to be empty not more than 10% of the time) unless there is a backlog of requests for spares, in which case it is dispatched immediately. The first model considered treats removal, transportation, and repair as one service operation. The second model is a series queue which allows for the separate treatment of removal, transportation, and repair. Breakdowns are assumed Poisson and repair times exponential.     

An optimum multiechelon repair policy and stockage model

Currently, sophisticated multiechelon models compute stockage quantities for spares and repair parts that will minimize total inventory investment while achieving a target level of weapon system operational availability. The maintenance policies to be followed are input to the stockage models. The Optimum Allocation of Test Equipment/Manpower Evaluated Against Logistics (OATMEAL) model will determine optimum maintenance as well as stockage policies for a weapon system. Specifically, it will determine at which echelon each maintenance function should be performed, including an option for component or module throwaway. Test equipment requirements to handle work load at each echelon are simultaneously optimized. Mixed-integer programming (MIP) combined with a Lagrangian approach are used to do the constrained cost minimization, that is, to minimize all costs dependent on maintenance and stockage policies while achieving a target weapons system operational availability. Real-life test cases are included.     

备件供应系统及其保证度模型研究

本文针对备件供应决策问题,提出了备件保证度的概念,阐述了保证度与使用可用度的关系,认为影响保证度的主要因素是:备件修复时间、备件获取时间、库存水平、设备数量及复杂程度和备件需求率,分析了二级供应系统的普遍性和代表性,并应用概率论的原理,建立了备件保证度模型。     

A two product dynamic economic lot size production model with either-or production constraints

This paper considers the production of two products with known demands over a finite set of periods. The production and inventory carrying costs for each product are assumed to be concave. We seek the minimum cost production schedule meeting all demands, without backlogging, assuming that at most one of the two products can be produced in any period. The optimization problem is first stated as a nonlinear programming problem, which allows the proof of a result permitting the search for the optimal policy to be restricted to those which produce a product only when its inventory level is zero. A dynamic programming formulation is given and the model is then formulated as a shortest route problem in a specially constructed network.     

Dynamic inventory management with cash flow constraints

In this article, we consider a classic dynamic inventory control problem of a self‐financing retailer who periodically replenishes its stock from a supplier and sells it to the market. The replenishment decisions of the retailer are constrained by cash flow, which is updated periodically following purchasing and sales in each period. Excess demand in each period is lost when insufficient inventory is in stock. The retailer's objective is to maximize its expected terminal wealth at the end of the planning horizon. We characterize the optimal inventory control policy and present a simple algorithm for computing the optimal policies for each period. Conditions are identified under which the optimal control policies are identical across periods. We also present comparative statics results on the optimal control policy. © 2008 Wiley Periodicals, Inc. Naval Research Logistics 2008     

Optimal control of a production‐inventory system with both backorders and lost sales

We consider the optimal control of a production inventory‐system with a single product and two customer classes where items are produced one unit at a time. Upon arrival, customer orders can be fulfilled from existing inventory, if there is any, backordered, or rejected. The two classes are differentiated by their backorder and lost sales costs. At each decision epoch, we must determine whether or not to produce an item and if so, whether to use this item to increase inventory or to reduce backlog. At each decision epoch, we must also determine whether or not to satisfy demand from a particular class (should one arise), backorder it, or reject it. In doing so, we must balance inventory holding costs against the costs of backordering and lost sales. We formulate the problem as a Markov decision process and use it to characterize the structure of the optimal policy. We show that the optimal policy can be described by three state‐dependent thresholds: a production base‐stock level and two order‐admission levels, one for each class. The production base‐stock level determines when production takes place and how to allocate items that are produced. This base‐stock level also determines when orders from the class with the lower shortage costs (Class 2) are backordered and not fulfilled from inventory. The order‐admission levels determine when orders should be rejected. We show that the threshold levels are monotonic (either nonincreasing or nondecreasing) in the backorder level of Class 2. We also characterize analytically the sensitivity of these thresholds to the various cost parameters. Using numerical results, we compare the performance of the optimal policy against several heuristics and show that those that do not allow for the possibility of both backordering and rejecting orders can perform poorly.© 2010 Wiley Periodicals, Inc. Naval Research Logistics 2010     

基于矩估计的高原航空备件消耗规律研究

针对高原航空备件消耗规律难把握的问题,提出了一种解决低消耗器材消耗预测的方法,利用矩估计把握器材的消耗规律和Monte Carlo仿真器材消耗的数据,找出储备量与满足率之间的关系,预测年平均消耗量。     

舰船随舰备件配置方法

为了准确预测备件需求数量,针对具体的保障对象和保障环境特点,需要选择合适的评价保障指标。本文针对单舰船在海上执行训练任务时的随舰备件保障问题,在分析影响随舰备件配置各因素的基础上,通过比较分析各评价保障指标的适用特点,选择满足率作为随舰备件的评价保障指标。从而给出了基于满足率模型的随舰单备件配置方法,能够为部队装备保障人员制定合理的保障方案提供决策依据。     

批量独立可修件的备件需求预测仿真算法

利用Monte Carlo随机仿真技术,采用事件调度法的仿真策略对可修件的使用与维修过程进行仿真,给出了在给定备件和维修分队数量下批量独立可修件的备件保障概率仿真算法,并用一系列计算实例证明了算法的可行性和正确性,该算法能有效解决安装在不同装备上,具有不同已工作时间、不同故障间隔时间分布、不同修复时间分布的可修件的备件保障概率计算问题,为备件的科学储备提供了有力的决策依据。     

Optimal design of a multi-item,multi-location,multi-repair type repair and supply system

The design of a system with many locations, each with many items which may fail while in use, is considered. When items fail, they require repair; the particular type of repair being governed by a probability distribution. As repairs may be lengthy, spares are kept on hand to replace failed items. System ineffectiveness is measured by expected weighted shortages over all items and locations, in steady state. This can be reduced by either having more spares or shorter expected repair times. Design consists of a provisioning of the number of spares for each item, by location; and specifying the expected repair times for each type of repair, by item and location. The optimal design minimizes expected shortages within a budget constraint, which covers both (i) procurement of spares and (ii) procurement of equipment and manning levels for the repair facilities. All costs are assumed to be separable so that a Lagrangian approach is fruitful, yielding an implementable algorithm with outputs useful for sensitivity analysis. A numerical example is presented.     

A characterization of optimal base‐stock levels for a multistage serial supply chain

In this article, we present a multistage model to optimize inventory control decisions under stochastic demand and continuous review. We first formulate the general problem for continuous stages and use a decomposition solution approach: since it is never optimal to let orders cross, the general problem can be broken into a set of single‐unit subproblems that can be solved in a sequential fashion. These subproblems are optimal control problems for which a differential equation must be solved. This can be done easily by recursively identifying coefficients and performing a line search. The methodology is then extended to a discrete number of stages and allows us to compute the optimal solution in an efficient manner, with a competitive complexity. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 32–46, 2016     

Optimal disposal policies for a single-item inventory system with returns

We consider a single-item inventory system in which the stock level can increase due to items being returned as well as decrease when demands occur. Returned items can be repaired and then used to satisfy future demand, or they can be disposed of. We identify those inventory levels where disposal is the best policy. It is shown that this problem is equivalent to a problem of controlling a single-server queue. When the return and demand processes are both Poisson, we find the optimal policy exactly. When the demand and return processes are more general, we use diffusion approximations to obtain an approximate model, which is then solved. The approximate model requires only mean and variance data. Besides the optimal policy, the output of the models includes such characteristics as the operating costs, the purchase rate for new items, the disposal rate for returned items and the average inventory level. Several numerical examples are given. An interesting by-product of our investigation is an approximation for the steady-state behavior of the bulk GI/G/1 queue with a queue limit.     

On ordering perishable inventory under erlang demand

Existing models for describing optimal ordering policies for perishable inventory cast the problem as a multidimensional dynamic program, the dimensionality being one less than the product lifetime in periods. An approach developed in previous work takes explicit account of outdating in the single period model. Formulas for the expected quantity of any new order which will outdate are developed for the case where the demand has a stationary Erlang distribution. A modified version of the one period model is shown to yield a reasonable approximation to the stationary optimal policy.     

Minimizing logistic costs in multistage supply chains

We consider the problem in which a set of products has to be shipped from a common origin to a common destination through one or several intermediate nodes with the objective of minimizing the sum of inventory and transportation costs when a set of possible shipping frequencies is given on each link. From the theoretical point of view, the main issue is the computation of the inventory cost in the intermediate nodes. From the computational point of view, given that the simpler single link problem is known to be NP-hard, we present four classes of heuristic algorithms. The first two classes are based on the decomposition of the sequence in links, the third class on the adaptation of the EOQ-type solution known for the continuous case, and the fourth on the optimal solution of a simpler problem through dynamic programming techniques. Finally, we compare them on a set of randomly generated problem instances. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 399–417, 1999     

Coordination of pricing and inventory control across products

We consider the joint pricing and inventory‐control problem for a retailer who orders, stocks, and sells two products. Cross‐price effects exist between the two products, which means that the demand of each product depends on the prices of both products. We derive the optimal pricing and inventory‐control policy and show that this policy differs from the base‐stock list‐price policy, which is optimal for the one‐product problem. We find that the retailer can significantly improve profits by managing the two products jointly as opposed to independently, especially when the cross‐price demand elasticity is high. We also find that the retailer can considerably improve profits by using dynamic pricing as opposed to static pricing, especially when the demand is nonstationary. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009