战时交通运输路径优化研究

以战时交通运输路径优化问题为研究对象,分析问题特点,考虑多式联运,以运输时间代价、运输费用代价、路段和运输节点的危险性代价为优化目标,建立起广义运输代价最小的运输路径优化模型,并设计了蚁群算法来求解问题模型。给出的算例表明,文中模型符合战时交通运输的特点和实际需要,可为确定战时运输路径提供决策支持,而采用的蚁群算法是求解该问题的一种有效方法。     

The transportation paradox

A paradox arises when a transportation problem admits to a total cost solution which is lower than the optimum and is attainable by shipping larger quantities of goods over the same routes that were previously designated as optimal. That is, falling total costs are present in moving to the greater shipment quantities. Necessary conditions for this to occur are established and an algorithm for solving this expanded transportation problem is supplied.     

A branch and bound algorithm for allocation problems in which constraint coefficients depend upon decision variables

A branch and bound algorithm is developed for a class of allocation problems in which some constraint coefficients depend on the values of certain of the decision variables. Were it not for these dependencies, the problems could be solved by linear programming. The algorithm is developed in terms of a strategic deployment problem in which it is desired to find a least-cost transportation fleet, subject to constraints on men/materiel requirements in the event of certain hypothesized contingencies. Among the transportation vehicles available for selection are aircraft which exhibit the characteristic that the amount of goods deliverable by an aircraft on a particular route in a given time period (called aircraft productivity and measured in kilotons/aircraft/month) depends on the ratio of type 1 to type 2 aircraft used on that particular route. A model is formulated in which these relationships are first approximated by piecewise linear functions. A branch and bound algorithm for solving the resultant nonlinear problem is then presented; the algorithm solves a sequence of linear programming problems. The algorithm is illustrated by a sample problem and comments concerning its practicality are made.     

Algorithms for the minimax transportation problem

In this paper, we consider a variant of the classical transportation problem as well as of the bottleneck transportation problem, which we call the minimax transportation problem. The problem considered is to determine a feasible flow x_ij from a set of origins I to a set of destinations J for which max_(i,j)εIxJ{c_ijx_ij} is minimum. In this paper, we develop a parametric algorithm and a primal-dual algorithm to solve this problem. The parametric algorithm solves a transportation problem with parametric upper bounds and the primal-dual algorithm solves a sequence of related maximum flow problems. The primal-dual algorithm is shown to be polynomially bounded. Numerical investigations with both the algorithms are described in detail. The primal-dual algorithm is found to be computationally superior to the parametric algorithm and it can solve problems up to 1000 origins, 1000 destinations and 10,000 arcs in less than 1 minute on a DEC 10 computer system. The optimum solution of the minimax transportation problem may be noninteger. We also suggest a polynomial algorithm to convert this solution into an integer optimum solution.     

A decomposable transshipment algorithm for a multiperiod transportation problem

A dynamic version of the transportation (Hitchcock) problem occurs when there are demands at each of n sinks for T periods which can be fulfilled by shipments from m sources. A requirement in period t₂ can be satisfied by a shipment in the same period (a linear shipping cost is incurred) or by a shipment in period t₁ < t₂ (in addition to the linear shipping cost a linear inventory cost is incurred for every period in which the commodity is stored). A well known method for solving this problem is to transform it into an equivalent single period transportation problem with mT sources and nT sinks. Our approach treats the model as a transshipment problem consisting of T, m source — n sink transportation problems linked together by inventory variables. Storage requirements are proportional to T² for the single period equivalent transportation algorithm, proportional to T, for our algorithm without decomposition, and independent of T for our algorithm with decomposition. This storage saving feature enables much larger problems to be solved than were previously possible. Futhermore, we can easily incorporate upper bounds on inventories. This is not possible in the single period transportation equivalent.     

D运输问题在物资调度中的应用

D运输问题是含离散目标约束的目标规划问题.首先将此多目标问题转化为单一目标问题,使之简化为传统的运输问题,然后使用一种相对简单的方法求解.最后结合一个实例,讨论了D运输问题在物资调度中的应用.     

一类带配送中心运输问题的容量扩张模型研究

运输问题一般采用表上作业法来解决,考虑一类带配送中心的运输问题,若仍采用表上作业法,会使问题复杂化.文中采用一种构造辅助网络的方法:在运输网络中将每个配送中心均拆分成两个点,连接两点形成新弧,构造出新的网络,并给每条弧赋予参数,将此类运输问题转换为最小费用流模型来解决,可以使问题模型和运算简单化.在此基础上,考虑运输网络中配送中心和边的容量扩张问题.     

一种新的运输问题对偶算法

本文给出求解运输问题的一种新的方法——运输问题对偶算法(仍是表上作业法)。最后给出的实例说明本文算法在解决某些问题时比[1]中方法简便。     

有容量限制的运输问题

具有容量限制的运输问题可以用有界变量的线性规划问题求解,但是问题的规模往往变得很大,给求解带来不便。本文给出求解这一问题的表上作业法。     

The enumeration of all efficient solutions for a linear multiple-objective transportation problem

An algorithm is presented by which the set of all efficient solutions for a linear multiple-objective transportation problem can be enumerated. First the algorithm determines an initial efficient basic solution. In a second step all efficient basic solutions are enumerated. Finally, the set of all efficient solutions is constructed as a union of a minimal number of convex sets of efficient solutions. The algorithm is illustrated by a numerical example.     

Optimal location of public facilities

Location of both public and private facilities has become an important consideration in today's society. Progress in solution of location problems has been impeded by difficulty of the fixed charge problem and the lack of an efficient algorithm for large problems. In this paper a method is developed for solving large-scale public location problems. An implicit enumeration scheme with an imbedded transportation algorithm forms the basis of the solution technique.     

A mean cost approximation for transportation problems with stochastic demand

Among the many tools of the operations researcher is the transportation algorithm which has been used to solve a variety of problems ranging from shipping plans to plant location. An important variation of the basic transportation problem is the transportation problem with stochastic demand or stochastic supply. This paper presents a simple approximation technique which may be used as a starting solution for algorithms that determine exact solutions. The paper indicates that the approximation technique offered here is superior to a starting solution obtained by substituting expected demand for the random variables.     

Determining optimal growth paths in logistics operations

This paper considers a logistics system modelled as a transportation problem with a linear cost structure and lower bounds on supply from each origin and to each destination. We provide an algorithm for obtaining the growth path of such a system, i. e., determining the optimum shipment patterns and supply levels from origins and to destinations, when the total volume handled in the system is increased. Extensions of the procedure for the case when the costs of supplying are convex and piecewise linear and for solving transportation problems that are not in “standard form” are discussed. A procedure is provided for determining optimal plant capacities when the market requirements have prespecified growth rates. A goal programming growth model where the minimum requirements are treated as goals rather than as absolute requirements is also formulated.     

The bottleneck transportation problem

The bottleneck transportation problem can be stated as follows: A set of supplies and a set of demands are specified such that the total supply is equal to the total demand. There is a transportation time associated between each supply point and each demand point. It is required to find a feasible distribution (of the supplies) which minimizes the maximum transportaton time associated between a supply point and a demand point such that the distribution between the two points is positive. In addition, one may wish to find from among all optimal solutions to the bottleneck transportation problem, a solution which minimizes the total distribution that requires the maximum time Two algorithms are given for solving the above problems. One of them is a primal approach in the sense that improving fcasible solutions are obtained at each iteration. The other is a “threshold” algorithm which is found to be far superior computationally.     

Transportation type problems with quantity discounts

It is known to be real that the per unit transportation cost from a specific supply source to a given demand sink is dependent on the quantity shipped, so that there exist finite intervals for quantities where price breaks are offered to customers. Thus, such a quantity discount results in a nonconvex, piecewise linear functional. In this paper, an algorithm is provided to solve this problem. This algorithm, with minor modifications, is shown to encompass the “incremental” quantity discount and the “fixed charge” transportation problems as well. It is based upon a branch-and-bound solution procedure. The branches lead to ordinary transportation problems, the results of which are obtained by utilizing the “cost operator” for one branch and “rim operator” for another branch. Suitable illustrations and extensions are also provided.     

Production and transport logistics scheduling with two transport mode choices

This paper considers a new class of scheduling problems arising in logistics systems in which two different transportation modes are available at the stage of product delivery. The mode with the shorter transportation time charges a higher cost. Each job ordered by the customer is first processed in the manufacturing facility and then transported to the customer. There is a due date for each job to arrive to the customer. Our approach integrates the machine scheduling problem in the manufacturing stage with the transportation mode selection problem in the delivery stage to achieve the global maximum benefit. In addition to studying the NP‐hard special case in which no tardy job is allowed, we consider in detail the problem when minimizing the sum of the total transportation cost and the total weighted tardiness cost is the objective. We provide a branch and bound algorithm with two different lower bounds. The effectiveness of the two lower bounds is discussed and compared. We also provide a mathematical model that is solvable by CPLEX. Computational results show that our branch and bound algorithm is more efficient than CPLEX. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005     

Bicriteria scheduling on a single batching machine with job transportation and deterioration considerations

We study a single batching machine scheduling problem with transportation and deterioration considerations arising from steel production. A set of jobs are transported, one at a time, by a vehicle from a holding area to the single batching machine. The machine can process several jobs simultaneously as a batch. The processing time of a job will increase if the duration from the time leaving the holding area to the start of its processing exceeds a given threshold. The time needed to process a batch is the longest of the job processing times in the batch. The problem is to determine the job sequence for transportation and the job batching for processing so as to minimize the makespan and the number of batches. We study four variations (P1, P2, P3, P4) of the problem with different treatments of the two criteria. We prove that all the four variations are strongly NP‐hard and further develop polynomial time algorithms for their special cases. For each of the first three variations, we propose a heuristic algorithm and analyze its worst‐case performance. For P4, which is to find the Pareto frontier, we provide a heuristic algorithm and an exact algorithm based on branch and bound. Computational experiments show that all the heuristic algorithms perform well on randomly generated problem instances, and the exact algorithm for P4 can obtain Pareto optimal schedules for small‐scale instances. © 2014 Wiley Periodicals, Inc. Naval Research Logistics 61: 269–285, 2014     

Sensitivity analysis as a means of reducing the dimensionality of a certain class of transportation problems

Sensitivity analysis of the transportation problem is developed in a way which enables reducing the dimensionality of the associated tableau. This technique is used to reduce the dimensionality of a transportation problem whose origin requirements are relatively small at the majority of origins. A long transportation problem, for which efficient solution procedures exist, results. A second application relates to the location-allocation problem. Reducing the dimensionality of such a problem, accompanied by the partial determination of the optimal solution, should prove helpful in the quest for an analytic solution to the aforementioned problem. In the meantime, reducing dimensionality greatly decreases the effort involved in solution by trial and error. Examples of the two applications are provided.     

A lagrangean relaxation algorithm for the constrained matrix problem

We present variants of a convergent Lagrangean relaxation algorithm for minimizing a strictly convex separable quadratic function over a transportation polytope. The algorithm alternately solves two “subproblems,” each of which has an objective function that is defined by using Lagrange multipliers derived from the other. Motivated by the natural separation of the subproblems into independent and very easily solved “subsubproblems,” the algorithm can be interpreted as the cyclic coordinate ascent method applied to the dual problem. We exhibit our computational results for different implementations of the algorithm applied to a set of large constrained matrix problems.     

Solving incremental quantity discounted transportation problems by vertex ranking

Logistics managers often encounter incremental quantity discounts when choosing the best transportation mode to use. This could occur when there is a choice of road, rail, or water modes to move freight from a set of supply points to various destinations. The selection of mode depends upon the amount to be moved and the costs, both continuous and fixed, associated with each mode. This can be modeled as a transportation problem with a piecewise-linear objective function. In this paper, we present a vertex ranking algorithm to solve the incremental quantity discounted transportation problem. Computational results for various test problems are presented and discussed.