共查询到20条相似文献,搜索用时 432 毫秒
1.
2.
3.
4.
在功能设计知识本体表示模型的基础上,提出了一种基于语义推理的多智能体协同功能设计框架。该框架分为两个部分,其中,基于Multi-agent的通信协作平台将OWL本体嵌入到FIPAACL中以实现产品设计Agent之间的设计知识通信;基于本体的功能建模方法则将本体表示与本体推理结合以支持功能设计本体的存储与检索。最后,对该框架所包含的协同功能设计本体语义推理模型进行了分析与实现,以证明所建议框架的有效性。 相似文献
5.
为了在开放、动态的环境中建立上下文感知系统,首先需要定义一个适合于知识共享的上下文描述,即上下文建模.提出了一种基于本体的通用上下文模型,由顶层上下文本体和6种特定本体构成.结合2008年汶川地震救援应用本体,描述了应用本体与通用上下文模型之间的关系.最后结合Web服务技术,提出了上下文感知的Web服务发现方法,对上下文感知计算的应用作了初步探索. 相似文献
6.
7.
为研究动基座下捷联惯导系统(Strapdown Inertial Navigation System, SINS)水平姿态误差角与水平重力扰动间的关系,推导了南北方向、东西方向匀速直线运动时,SINS纯惯性解算的水平姿态误差与水平重力扰动间的传递函数,并分析了传递函数的零极点分布;推导了组合导航模式下,水平姿态误差角与水平重力扰动间的传递函数;通过仿真分析了纯惯性解算和组合导航模式下传递函数的幅频特性。组合导航相对于纯惯性解算模式,截止频率更大,SINS姿态误差角受更多高频重力扰动信号的影响,因此,组合导航模式需要更高分辨率的重力扰动数据来进行重力扰动补偿。此外,在对高精度SINS进行重力扰动补偿时,对于重力扰动分辨率的需求是有限度的,过于精细的重力扰动数据只会带来测量和存储压力,不能提高SINS的姿态精度。 相似文献
8.
9.
10.
采用大涡模拟数值计算二维空间发展的超声速混合层,重点分析横向扰动对混合层的标量结构、标量厚度以及标量体积卷吸率的影响。采用理论模型验证了数值方法在计算标量混合特性方面的准确性。结果表明,横向扰动频率和振幅明显影响着混合层的标量增长率和卷吸率。高频扰动增大了混合层近场标量增长率和卷吸率,但是低频扰动改善了混合层远场标量增长率。大尺度涡卷吸过程对混合层标量卷吸率起决定作用。多频扰动有效地增强了超声速混合层的标量混合。 相似文献
11.
马海江 《兵团教育学院学报》2012,(2):52-56
本文针对我国高校大学生体质下降的情况,提出高校学生体育健身服务体系的构建思路,对探索学校体育的目标实现,对我国全民健身的发展有着重要意义。 相似文献
12.
测试系统静电干扰的仿真实验研究 总被引:2,自引:1,他引:1
由于静电干扰的随机性和测试手段的限制 ,难以定量计算静电对测试系统的影响程度。基于人体静电模型和器件模型 ,导出用起电率表示的静电干扰对测试系统影响的仿真计算式 ,并计算出了一般静电环境下静电干扰的具体值 ,为测试系统的干扰计算和静电防护提供了依据 相似文献
13.
Personal body armour is one of the most important pieces of equipment to protect human beings from various critical and fatal injuries. In today’s modern world, various organizations including law enforcement and security service have made it mandatory for their personnel to wear personal protection system while on field duty. However, the systems should comprise an improved ballistic performance, light-weighted, flexible as well as comfortable panel not only to be accepted with a wider range but also for effective performances of the consumer. Generally, the overall performances of the protective body armour could be affected by various parameters including armour design techniques, type of materials used and finishing of the panels. The current paper aims to critically review state-of-art for armour panel design techniques and the different perspective body armour materials. The paper starts by discussing the different body armour and its category. Later, the different states of technology for armour panel design (mostly for women), its problems and the possible solutions will be cited. Later, the commonly used different polymeric fibrous and the future possible advanced materials including carbon nanotube (CNT), Graphene CNT and shear thickening fluids (STFs) treated materials for developing the reinforced body armour panel will be discussed. The authors believe that this paper will enlighten useful guidelines and procedures about the different panel design techniques and current and promising future materials for researchers, designers, engineers and manufacturers working on the impact resistance body armour field. 相似文献
14.
《防务技术》2020,16(2):432-438
The airborne missile launch mechanism often subjects to significant deformations induced by the large ejection force during high-speed actuations in missile ejection process, leading to a substantial deviation of separation parameters from designed values that threats safety of the carrier. This study proposes a novel variable topology design for launch mechanism, achieved via a Prismatic-Revolute-Revolute pair (PR-R) motion formed by the structural gap with a specific direction. It enables launch mechanism variability during missile ejection process and optimizes the ejection force given by the front and back ejection arms, and greatly optimizes the separation parameters during missile ejection. The kinetics simulation analysis is conducted under working conditions of the original ejection mechanism and the novel mechanism with variable topology design, respectively. The results show that the novel variable topology design is more befitting for the launch process in terms of system safety and controllability, effectively improving the separation posture, restraining the flexible effect of the mechanism, and fulfilling the effectiveness of the design value of multi-rigid body. 相似文献
15.
传统的目标跟踪算法需要人为标定跟踪区域,且受到漂移问题的影响。为了解决这些困难,针对人体跟踪问题,提出了一种新的基于检测的跟踪算法。为了减少漏跟踪,使用了多个检测算子,用来定位多个身体部位,将其检测结果映射到一个相同的身体区域。为了适应快速运动的目标,使用KLT跟踪和凝聚聚类将检测窗口连接起来形成人体轨迹。实验结果表明:使用多个检测算子明显地提高了跟踪性能;KLT跟踪对于快速运动目标具有适应能力。该算法基本满足实时性。 相似文献
16.
17.
为了计算面对称旋转导弹的刚体弹道,根据面对称旋转导弹的特点,建立了其刚体弹道模型,定义了模型中的坐标系并给出了各个坐标系之间的转换关系,在此基础上得出了角度的计算公式,分析了风对旋转导弹运动的影响,在弹体坐标系下计算了气动力和气动力矩,解决了面对称旋转导弹弹道精确计算问题。 相似文献
18.
19.
一种齿轮箱振动控制方法 总被引:4,自引:0,他引:4
从机械结构的振动控制理论出发 ,提出了一种齿轮箱振动控制方法 ,研究并讨论几种齿轮箱箱体以及齿轮本体的结构参数对动态特性的影响 ,其结论可以为齿轮箱的振动设计提供参考依据 相似文献
20.
本文报导了混纺导电纤维及其织物的电晕放电实验研究结果,指出导电纤维的电晕放电对人体静电荷的消散不起主要作用,而只有人体静电接地,才能较好地消除静电隐患,进而明确了防静电工作服的作用机理。 相似文献