Critical interfaces in body armour systems

The ballistic performance, and behaviour, of an armour system is governed by two major sets of variables, geometrical and material. Of these, the consistency of performance, especially against small arms ammunition, will depend upon the consistency of the properties of the constituent materials. In a body armour system for example, fibre diameter, areal density of woven fabric, and bulk density of ceramic are examples of critical parameters and monitoring such parameters will form the backbone of associated quality control procedures. What is often overlooked, because it can fall into the User’s domain, are the interfaces that exist between the various products; the carrier, the Soft Armour Insert (SAI), and the one or two hard armour plates (HAP1 and HAP2). This is especially true if the various products are sourced from different suppliers.There are between 30 and 150 individual layers within a typical body armour system, and each of the interfaces between each of those layers will, in some way or another, contribute to the ballistic performance of the system. For example, consider the following interfaces/interlayers: (i) the frictional, sliding, inter-ply surfaces within a soft armour pack, and also between the pack and the carrier, (ii) the air-gaps that may develop within the soft armour pack, (iii) the interconnecting space between the soft armour pack and the hard armour plate, (iv) the nature of the interfaces between adjacent plies of a multiplied backing laminate, even in a highly compressed Ultra High Molecular Weight Polyethylene (UHMWPE) variant, (v) the interlayer between the ceramic and its substrate, within a HAP, and (vi) the geometrical fit between two hard armour plates within a stacked body armour system. This paper will provide a User-friendly overview of all such interfaces and provide unique guidance as to their criticality and influence.     

Body armour – New materials,new systems

This is a very timely review of body armour materials and systems since new test standards are currently being written, or reviewed, and new, innovative products released. Of greatest importance, however, is the recent evolution, and maturity, of the Ultra High Molecular Weight Polyethylene fibres enabling a completely new style of system to evolve – a stackable system of Hard Armour Plates. The science of body armour materials is quickly reviewed with emphasis upon current understanding of relevant energy-absorbing mechanisms in fibres, fabrics, polymeric laminates and ceramics. The trend in on-going developments in ballistic fibres is then reviewed, analysed and future projections offered. Weaknesses in some of the ceramic grades are highlighted as is the value of using cladding materials to improve the robustness, and multi-strike performance, of Hard Armour Plates. Finally, with the drive for lighter, and therefore smaller, soft armour systems for military personnel the challenges for armour designers are reported, and the importance of the relative size of the Hard Armour Plate to the Soft Armour Insert is strongly emphasised.     

Ballistic response of armour plates using Generative Adversarial Networks

It is important to understand how ballistic materials respond to impact from projectiles such that informed decisions can be made in the design process of protective armour systems. Ballistic testing is a standards-based process where materials are tested to determine whether they meet protection, safety and performance criteria. For the V₅₀ ballistic test, projectiles are fired at different velocities to determine a key design parameter known as the ballistic limit velocity (BLV), the velocity above which projectiles perforate the target. These tests, however, are destructive by nature and as such there can be considerable associated costs, especially when studying complex armour materials and systems. This study proposes a unique solution to the problem using a recent class of machine learning system known as the Generative Adversarial Network (GAN). The GAN can be used to generate new ballistic samples as opposed to performing additional destructive experiments. A GAN network architecture is tested and trained on three different ballistic data sets, and their performance is compared. The trained networks were able to successfully produce ballistic curves with an overall RMSE of between 10 and 20 % and predicted the V₅₀ BLV in each case with an error of less than 5 %. The results demonstrate that it is possible to train generative networks on a limited number of ballistic samples and use the trained network to generate many new samples representative of the data that it was trained on. The paper spotlights the benefits that generative networks can bring to ballistic applications and provides an alternative to expensive testing during the early stages of the design process.     

静电放电模拟器辐照效应实验研究

对模拟器ESS - 2 0 0AX与NSG435的静电放电 (ESD)电流波形及其辐照效应实验进行了研究。实验结果表明 ,虽然两模拟器的放电电流波形均符合国际电工委员会IEC6 10 0 0 - 4- 2静电放电抗扰度实验标准 ,但进行辐照效应实验时 ,二者的测试结果并不一致。这主要是因为IEC标准只规定了放电电流的波形 ,而对模拟器放电枪的结构和外形未做出规定 ,使静电放电电磁场尤其是近区电磁场存在差异。要解决不同模拟器间测量结果的不一致性 ,IEC的相关标准除了规定放电电流的波形外 ,还应对放电电流的导数波形和相关的电磁场做出规定 ,尽量对放电枪的形状和结构给出统一的标准。     

‘Trusty Bess’: the Definitive Origins and History of the term 'Brown Bess'

The aim of this article is to settle once and for all the question of the term ‘Brown Bess’, as applied to the British soldier’s musket. The specific origin and meaning of this obviously affectionate nickname has long confounded arms and armour scholars, re-enactors, and collectors alike. As a result, various possible solutions have been offered. The article outlines the historical usage of the name, including earlier written references not widely known in the field. The scope of the term is also addressed, using period sources to demonstrate what ‘Brown Bess’ meant to those who actually used the name historically. The many false etymologies of the name are assessed and found wanting or ‘debunked’ outright. Finally, drawing upon existing research from the field of linguistics, the article details the real meaning behind ‘Brown Bess’ the firearm and places ‘her’ in a wider sociohistorical context.     

无人战斗机技术要素研究

无人战斗机作为介于有人战斗机和巡航导弹之间的一种新型武器系统,将在未来空战中发挥重大作用。主要对目前存在的无人战斗机（ＵＣＡＶ）概念进行了讨论,分析了无人战斗机的基本性能和技术要素,提出了未来无人战斗机的发展趋势。     

A comparison of the ballistic behaviour of conventionally sintered and additively manufactured alumina

Production of ceramic armour solutions on-demand/in-theatre would have significant logistical and military advantages. However, even assuming that such technologies could be successfully deployed in the field, such near net-shape manufacturing technology is relatively immature compared to conventional sintering of ceramics. In this study, the ballistic performance of a series of additively manufactured (AM)/rapidly-prototyped (RP) alumina tiles of 97.2% of the density of Sintox FA™ were investigated using both forward- and reverse-ballistic experiments. These experiments, undertaken with compressed gas-guns, employed the depth-of-penetration technique and flash X-ray as primary diagnostics to interrogate both efficiency of penetration and projectile-target interaction, respectively. The RP alumina was found to exhibit useful ballistic properties, successfully defeating steel-cored (AP) 7.62 × 39 mm BXN rounds at velocities of up-to c.a. 850 m/s, while exhibiting comparable failure modes to conventionally sintered armour-grade Sintox FA™. However, where a <1% by vol. Cu dopant was introduced into the RP material failure modes changed dramatically with performance dropping below that of conventionally sintered alumina. Overall, the results from both sets of experiments were complimentary and clearly indicated the potential of such RP materials to play an active role in provision of real-world body armour solutions provided quality control of the RP material can be maintained.     

Nuclear Fusion Power for Weapons Purposes

Fusion reactors have the potential to be used for military purposes. This article provides quantitative estimates about weapon-relevant materials produced in future commercial fusion reactors and discusses how suitable such materials are for use in nuclear weapons. Whether states will consider such use in the future will depend on specific regulatory, political, economic, and technical boundary conditions. Based on expert interviews and the political science literature, we identify three of these conditions that could determine whether fusion power will have a military dimension in the second half of this century: first, the technological trajectory of global energy policies; second, the management of a peaceful power transition between rising and declining powers; and third, the overall acceptance of the nuclear normative order. Finally, the article discusses a few regulatory options that could be implemented by the time fusion reactors reach technological maturity and become commercially available; such research on fusion reactor safeguards should start as early as possible and accompany the current research on experimental fusion reactors.     

The next decade of logistics research

Pathbreaking logistics research over the next 10 years will focus on systems problems. Whereas past research generally has taken a “bottom-up” approach, future investigations are likely to pursue a “top-down” philosophy. Specifically, attention will concentrate on diagnosis of systems' improvement potentials; easy-to-use analytic approaches, inherently approximative, will be devised for quickly ascertaining whether a complex operating system can be substantially and effectively improved. Theories to assist in overall systems design, particularly the setting of boundaries and buffers among systems components, will be developed. At the same time, techniques for accurately forecasting future systems performance will be investigated. Underlying such research will be efforts to gain better understanding of management information requirements, including approaches for monitoring systems performance and providing early warning detection of systems degradation Improved management information systems will have to be coupled with appropriate design of managerial organizations and assignment of decision making responsibilities. Important avenues of research will he development of robust approaches, that is, both mathematical techniques and organizational approaches that are not too adversely affected by limited data, a changing environment, and human frailly. Finally, critical research will be directed at the implementation process, especially the interaction among initiation, design, testing and ultimate adoption This prognosis will explore the above themes in the context of large-scale, complex systems. The decision areas will encompass inventory replenishment, multiechelon hierarchies for stockage and maintenance, procurement, transportation, scheduling, facilities planning, budgeting, reliability and personnel management.     

无人机系统自主控制技术研究现状与发展趋势

无人机系统是未来进行信息对抗、夺取信息优势、实施火力打击的重要手段。"自主性"是无人机系统区别于有人机最重要的技术特征,实现无人机系统的自主控制,提高其智能程度,是无人机系统的重要发展趋势。对无人机系统自主控制问题进行了阐述,首先分析了无人机系统自主控制技术的发展需求,然后介绍了自主控制的概念和自主等级的划分;分析了无人机系统自主控制技术的研究现状,提出了无人机系统自主控制的关键技术问题,主要包括体系结构、感知与认知、规划与控制、协同与交互等;最后对无人机系统自主控制技术的发展趋势进行了展望。     

Research progress on advanced rail materials for electromagnetic railgun technology

Electromagnetic railgun attracts more and more attention due to its advantage in speed,cost,and obscurity.It is found that the rail should withstand huge mechanical and thermal shocks during the launching operation.The forms of rail failure are accompanied by gouge,grooving,transition,and arc ablation,etc.The service life of the rail has become a bottleneck restricting the development of elec-tromagnetic railgun technology.A series of researches are carried out to solve rail failure,including analysing the failure mechanism and using various advanced rail materials.This paper provides a comprehensive review of rail materials,including material composition,preparation,microstructure,and properties.We begin from a short background of the requirement of the rail material.Then a detailed investigation of rail materials is described,and the performances of those materials are introduced.Finally,further development prospect of rail material is discussed.     

Statistical variability and fragility assessment of ballistic perforation of steel plates for 7.62 mm AP ammunition

The paper describes field test results of 7.62 × 51 mm M61 AP (armour piercing) ammunition fired into mild steel targets at an outdoor range. The targets varied from 10 mm to 32 mm in thickness. The tests recorded penetration depth, probability of perforation (i.e., complete penetration), muzzle and impact velocities, bullet mass, and plate yield strength and hardness. The measured penetration depth exhibited a variability of approximately ±12%. The paper then compared ballistic test results with predictive models of steel penetration depth and thickness to prevent perforation. Statistical parameters were derived for muzzle and impact velocity, bullet mass, plate thickness, plate hardness, and model error. A Monte-Carlo probabilistic analysis was then developed to estimate the probability of plate perforation of 7.62 mm M61 AP ammunition for a range of impact velocities, and for mild steels, and High Hardness Armour (HHA) plates. This perforation fragility analysis considered the random variability of impact velocity, bullet mass, plate thickness, plate hardness, and model error. Such a probabilistic analysis allows for reliability-based design, where, for example, the plate thickness with 95% reliability (i.e. only 1 in 20 shots will penetrate the wall) can be estimated knowing the probabilistic distribution of perforation. Hence, it was found that the plate thickness to ensure a low 5% probability of perforation needs to be 11–15% thicker than required to have a 50/50 chance of perforation for mild steel plates. Plates would need to be 20–30% thicker if probability of perforation is reduced to zero.     

Round robin using the depth of penetration test method on an armour grade alumina

The depth of penetration (DOP) method is a well-known ballistic test method for characterisation and ranking of ceramic armour materials. The ceramic tile is bonded to a backing material of semi-infinite thickness, and the penetration depth of the projectile gives a measure of the performance of the ceramic. There is, however, an inherent variability in the results from this test method. In this work, the accuracy and the variability of the DOP method has been investigated in a round robin exercise. Six ballistic test centres took part in the exercise. A test protocol was developed, in which the threat type (projectile and impact conditions) and a procedure on how to prepare the targets were specified. The targets consisted of alumina tiles of two different thicknesses that were bonded to polycarbonate backing cubes. Two different 7.62 mm armour piercing projectiles were employed; one with a hard steel core and one with a tungsten carbide core. The projectiles and the other materials all came from single material batches in order to avoid batch-to-batch variations in material properties. These materials were distributed between the ballistic test centres. The test results of the different ballistic test facilities were collected and compared. There was not a lot of variation between the average DOP values obtained at each laboratory, but the variation in penetration depth between shots was high. The consequence of this variation may be less confidence in the test results, and a statistical method was used to evaluate the required number of tests that are sufficient to obtain an average result with high confidence. In most cases, the required number of tests is much higher than what is practically feasible. This work was conducted as part of the European Defence Agency-project CERAMBALL.     

软件测试方法综述

论述了软件测试技术近几年来研究的最新成果。包括软件的故障模型、白盒测试技术、黑盒测试技术、人工测试技术、可靠性测试技术和测试性设计技术等。以作为对近十几年来软件测试技术发展的总结,还初步的探讨了软件测试技术今后的发展。     

The Archduke and the Bullet-Proof Vest: 19th-Century Innovation Versus 20th-Century Firepower

Abstract

To substantiate or otherwise the historical rumours that claim that the Archduke Franz Ferdinand failed to wear a piece of silk bullet-proof body armour on the day of his assassination, 28 June 1914, the likelihood of the Archduke possessing this invention is assessed and its composition and design is considered. The capabilities of such armours, the brainchild of priest-turned-inventor Casimir Zeglen, against the FN Browning Model 1910, in .380 ACP, the same model of self-loading pistol used to assassinate Franz Ferdinand, were tested.     

THE SECURITY IMPLICATIONS OF CHINA'S NUCLEAR ENERGY EXPANSION

Nuclear energy is an integral part of China's energy strategy and will increasingly contribute to China's total energy supply. China has more than twenty civilian facilities, including power reactors, mines, and enrichment plants, to support its nuclear power program. As China operates more nuclear plants, more nuclear materials will be produced and stockpiled, and more nuclear facilities will be spread around the country. To ensure that this expanded network of nuclear facilities does not increase the risk that nuclear materials will be diverted or become the target of attack, China will need to develop more reliable domestic nuclear security strategies. China is also poised to become a major exporter of nuclear energy technology. China has committed to keeping nuclear technologies out of the hands of dangerous states and/or sub-state organizations, but in order to fulfill its nonproliferation obligations as well as its treaty-based commitment to share nuclear technologies, China will need to strengthen nuclear export controls and practices. This report examines and evaluates security measures at Chinese civilian nuclear power plants and suggests ways to improve them. It also reviews current export control policies and systems, identifies likely challenges to the expanding nuclear sector, and proposes possible solutions.     

磁浮列车感应无线通信技术

感应无线通信是一种新型的通信方式,它既有别于有线通信,又不同于无线通信,在轨道交通和军事领域有着广泛的应用前景。重点探讨了感应无线通信的基本原理和电磁感应通信的特点,分析了电磁感应通信中的调制和解调的方法,同时给出了系统的具体实现电路。在上述分析的基础上,结合我国磁浮列车的发展情况,提出了适合现阶段的磁浮列车通信的方案,并介绍了相关试验结果。     

Development of cost effective personnel armour through structural hybridization

The objective of the present study is to develop cost effective thermoplastic hybrid laminate using Dyneema® HB50 and Tensylon®HSBD 30A through structural hybridization method. Laminates having 20 mm thickness were fabricated and subjected to 7.62 × 39 mm mild steel core projectile with an impact velocity of 730 ± 10 ms⁻¹. Parameters such as energy absorption, back face deformation and rate of back face deformation were measured as a function of hybridization ratio. It was observed that hybrid laminate with 50:50 ratio (w/w) of Tensylon® and Dyneema® with Tensylon® as front face showed 200% more energy absorption when compared to 100% Tensylon® laminate and showed equal energy absorption as that of expensive 100% Dyneema® laminate. Moreover, hybrid laminate with TD50:50 ratio showed 40% lower in terms of final back face deformation than Dyneema® laminate. Rate of back face deformation was also found to be slow for hybrid laminate as compared to Dyneema® laminate. Dynamic mechanical analysis showed that, Tensylon® laminate has got higher stiffness and lower damping factor than Dyneema® and hybrid laminates. The interface between Tensylon® and Dyneema® layers was found to be separating during the penetration process due to the poor interfacial bonding. Failure behaviour of laminates for different hybridization ratios were studied by sectioning the impacted laminates. It was observed that, the Tensylon® laminate has undergone shear cutting of fibers as major failure mode whereas the hybrid laminate showed shear cutting followed by tensile stretching, fiber pull out and delamination. These inputs are highly useful for body armour applications to design cost effective armour with enhanced performance.     

特种车辆乘载员生理监测与调节系统

特种车辆乘栽员的生理心理状态与车辆技术状态并列成为影响车辆整体效能的重要因素。针对乘栽员的生理心理状态进行监测并适时干预,可以实时掌握并调整人员状态。既有利于车辆能力发挥,也有利于整体协调。生理监测调节系统拟采用生物传感技术,采集人员生理心理指标参数,通过车辆通信及指控系统网络,使指挥人员能够及时掌握人员的疲劳及生命体征状态．通过合理的心理干预及医疗指导。使人员保持良好的心理生理状态或合理的医疗自救互救,最大程度地保存行动能力。该系统可应用于平时训练及评估．也可应用于行动决策指挥及医疗救护部署。     

Optimal design of a novel cylindrical sandwich panel with double arrow auxetic core under air blast loading

The increasing threat of explosions on the battle field and the terrorist action requires the development of more effective blast resistance materials and structures. Curved structure can support the external loads effectively by virtue of their spatial curvature. In review of the excellent energy absorption property of auxetic structure, employing auxetic structure as core material in curved sandwich shows the potential to improve the protection performance. In this study, a novel cylindrical sandwich panel with double arrow auxetic (DAA) core was designed and the numerical model was built by ABAQUS. Due to the complexity of the structure, systematic parameter study and optimal design are conducted. Two cases of optimal design were considered, case1 focuses on reducing the deflection and mass of the structure, while case2 focuses on reducing the deflection and increasing the energy absorption per unit mass. Parameter study and optimal design were conducted based on Latin Hypercube Sampling (LHD) method, artificial neural networks (ANN) metamodel and the nondominated sorting genetic algorithm (NSGA-Ⅱ). The Pareto front was obtained and the cylindrical DAA structure performed much better than its equal solid panel in both blast resistance and energy absorption capacity. Optimization results can be used as a reference for different applications.