On computing the expected discounted return in a markov chain

The discounted return associated with a finite state Markov chain X₁, X₂… is given by g(X₁)+ αg(X₂) + α²g(X₃) + …, where g(x) represents the immediate return from state x. Knowing the transition matrix of the chain, it is desired to compute the expected discounted return (present worth) given the initial state. This type of problem arises in inventory theory, dynamic programming, and elsewhere. Usually the solution is approximated by solving the system of linear equations characterizing the expected return. These equations can be solved by a variety of well-known methods. This paper describes yet another method, which is a slight modification of the classical iterative scheme. The method gives sequences of upper and lower bounds which converge mono-tonely to the solution. Hence, the method is relatively free of error control problems. Computational experiments were conducted which suggest that for problems with a large number of states, the method is quite efficient. The amount of computation required to obtain the solution increases much slower with an increase in the number of states, N, than with the conventional methods. In fact, computational time is more nearly proportional to N², than to N³.     

A new outranking‐based approach for assigning alternatives to ordered classes

We consider the problem of assigning alternatives evaluated on several criteria into ordered categories C₁,C₂,…,C_p. This problem is known as the multi‐criteria sorting problem and arises in many situations such as classifying countries into different risk levels based on economical and socio‐political criteria, evaluating credit applications of bank customers. We are interested in sorting methods that are grounded on the construction of outranking relations. Among these, the Electre Tri method requires defining multidimensional profiles that represent the “frontier” separating consecutive categories C_h and C_h+1, and assigns an alternative to categories according to how it compares to each of the profiles. The explicit specification of the profiles of consecutive categories can be difficult for decision makers. We develop a new outranking based sorting method that does not require the explicit definition of profiles. We instead require the decision maker to assign a subset of reference alternatives to the categories. To assign the remaining alternatives, each such alternative is compared to reference alternatives, and assigned to categories accordingly. © 2008 Wiley Periodicals, Inc. Naval Research Logistics 2009     

Transportation problems with some xij negative and transshipment problems

The general solution process of the Hitchcock transportation problem resulting from the application of the method of reduced matrices may give solutions with some negative x_ij values. This paper is devoted to a review of the reduced matrices method, an examination of suitable interpretation of sets of x_ij which include some negative values, and ways of interpreting these values in useful modifications of the Hitchcock problem. Such modifications include a) the reshipment problem, b) the overshipment problem, and c) the transshipment problem. Techniques are developed for determining and eliminating c_ij which are not optimal. These techniques and results are useful in solving the problems indicated above. The natural applicability of the simple and general method of reduced matrices is emphasized.     

A decomposable transshipment algorithm for a multiperiod transportation problem

A dynamic version of the transportation (Hitchcock) problem occurs when there are demands at each of n sinks for T periods which can be fulfilled by shipments from m sources. A requirement in period t₂ can be satisfied by a shipment in the same period (a linear shipping cost is incurred) or by a shipment in period t₁ < t₂ (in addition to the linear shipping cost a linear inventory cost is incurred for every period in which the commodity is stored). A well known method for solving this problem is to transform it into an equivalent single period transportation problem with mT sources and nT sinks. Our approach treats the model as a transshipment problem consisting of T, m source — n sink transportation problems linked together by inventory variables. Storage requirements are proportional to T² for the single period equivalent transportation algorithm, proportional to T, for our algorithm without decomposition, and independent of T for our algorithm with decomposition. This storage saving feature enables much larger problems to be solved than were previously possible. Futhermore, we can easily incorporate upper bounds on inventories. This is not possible in the single period transportation equivalent.     

Linear compound algorithms for the partitioning problem

For a given set S of nonnegative integers the partitioning problem asks for a partition of S into two disjoint subsets S₁ and S₂ such that the sum of elements in S₁ is equal to the sum of elements in S₂. If additionally two elements (the kernels) r₁, r₂ ∈ S are given which must not be assigned to the same set S_i, we get the partitioning problem with kernels. For these NP‐complete problems the authors present two compound algorithms which consist both of three linear greedylike algorithms running independently. It is shown that the worst‐case performance of the heuristic for the ordinary partitioning problem is 12/11, while the second procedure for partitioning with kernels has a bound of 8/7. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 593–601, 2000     

On efficient algorithms for finding efficient salvo policies

We consider the salvo policy problem, in which there are k moments, called salvos, at which we can fire multiple missiles simultaneously at an incoming object. Each salvo is characterized by a probability p_i: the hit probability of a single missile. After each salvo, we can assess whether the incoming object is still active. If it is, we fire the missiles assigned to the next salvo. In the salvo policy problem, the goal is to assign at most n missiles to salvos in order to minimize the expected number of missiles used. We consider three problem versions. In Gould's version, we have to assign all n missiles to salvos. In the Big Bomb version, a cost of B is incurred when all salvo's are unsuccessful. Finally, we consider the Quota version in which the kill probability should exceed some quota Q. We discuss the computational complexity and the approximability of these problem versions. In particular, we show that Gould's version and the Big Bomb version admit pseudopolynomial time exact algorithms and fully polynomial time approximation schemes. We also present an iterative approximation algorithm for the Quota version, and show that a related problem is NP-complete.     

Solving a selected class of location problems by exploiting problem structure: A decomposition approach

For many combinatorial optimization problems that are NP-hard, a number of special cases exist that can be solved in polynomial time. This paper addresses the issue of solving one such problem, the well-known m-median problem with mutual communication (MMMC), by exploiting polynomially solvable special cases of the problem. For MMMC, a dependency graph is defined that characterizes the structure of the interactions between decision variables. A Lagrangian decomposition scheme is proposed that partitions the problem into two or more subproblems, each having the same structure as the original problem, but with simpler dependency graphs. The dual problems are solved using subgradient or multiplier adjustment methods. An efficient method of adjusting the multiplier values is given. Computational results are reported that show the method to be quite effective. In addition, applications of the approach to other difficult location problems is discussed. © 1998 John Wiley & Sons, Inc. Naval Research Logistics 45: 791–815, 1998     

Bounding methods for facilities location algorithms

Single- and multi-facility location problems are often solved with iterative computational procedures. Although these procedures have proven to converage, in practice it is desirable to be able to compute a lower bound on the objective function at each iteration. This enables the user to stop the iterative process when the objective function is within a prespecified tolerance of the optimum value. In this article we generalize a new bounding method to include multi-facility problems with l_p distances. A proof is given that for Euclidean distance problems the new bounding procedure is superior to two other known methods. Numerical results are given for the three methods.     

Algorithm to solve a chance‐constrained network capacity design problem with stochastic demands and finite support

We consider the problem of determining the capacity to assign to each arc in a given network, subject to uncertainty in the supply and/or demand of each node. This design problem underlies many real‐world applications, such as the design of power transmission and telecommunications networks. We first consider the case where a set of supply/demand scenarios are provided, and we must determine the minimum‐cost set of arc capacities such that a feasible flow exists for each scenario. We briefly review existing theoretical approaches to solving this problem and explore implementation strategies to reduce run times. With this as a foundation, our primary focus is on a chance‐constrained version of the problem in which α% of the scenarios must be feasible under the chosen capacity, where α is a user‐defined parameter and the specific scenarios to be satisfied are not predetermined. We describe an algorithm which utilizes a separation routine for identifying violated cut‐sets which can solve the problem to optimality, and we present computational results. We also present a novel greedy algorithm, our primary contribution, which can be used to solve for a high quality heuristic solution. We present computational analysis to evaluate the performance of our proposed approaches. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 236–246, 2016     

Peak rate of occurrence of a poisson process

Suppose that a nonhomogeneous Poisson process is observed for a length of time T, say Let λ (t) denote the mean value function of the process. It is assumed that λ (t) is first increasing then decreasing inside the interval (0, T) with peak at t = t₀, say. Three methods are given for estimating to. One of these methods is nonparametric, and the other two methods are based on the standard regression technique and the maximum likelihood principle The given resull has application in a problem of determining the azimuth of a target from the radar-impulse data. The time series of incoming signals may be approximated by the occurrence of a nonhomogeneous Poisson process with mean value function λ (t). The azimuth of the target is reasonably determined from the direction of the axis of the radar beam at the instant to, corresponding to the peak value of λ (t).     

A note on a paper by W. Szwarc

In this note the authors call for a change of the optimality criteria given by Theorem 3 in section 5 of the paper of W. Szwarc “On Some Sequencing Problems” in NRLQ Vol. 15, No. 2 [2]. Further, two cases of the three machine problem, namely, (i) ≦ and (ii) ≦ are considered, and procedures for obtaining optimal sequences in these cases are given. In these cases the three-machine problem is solved by solving n (the number of jobs) two-machine problems.     

On scheduling with earliest starts and due dates on a group of identical machines

This paper examines the (n, m) scheduling problem with n operations distributed among m machines. An algorithm for solving this problem is presented and, gives a good heuristic solution on a wide class of problems. Computational results are reported which demonstrate the efficiency of this approach.     

A note on a stochastic production-maximizing transportation problem

A stochastic production-maximizing problem with transportation constraints is considered where the production rates, R_ij, of man i — job j combinations are random variables rather than constants. It is shown that for the family of Weibull distributions (of which the Exponential is a special case) with scale parameters λ_ij and shape parameter β, the plan that maximizes the expected rate of the entire line is obtained by solving a deterministic fixed charge transportation problem with no linear costs and with “set-up” cost matrix ‖λ_ij‖.     

Optimal refueling strategies for a mixed-vehicle fleet

The problem treated here involves a mixed fleet of vehicles comprising two types of vehicles: K₁ tanker-type vehicles capable of refueling themselves and other vehicles, and K₂ nontanker vehicles incapable of refueling. The two groups of vehicles have different fuel capacities as well as different fuel consumption rates. The problem is to find the tanker refueling sequence that maximizes the range attainable for the K₂ nontankers. A tanker refueling sequence is a partition of the tankers into m subsets (2 ≤ m ≤ K₁). A given sequence of the partition provides a realization of the number of tankers participating in each successive refueling operation. The problem is first formulated as a nonlinear mixed-integer program and reduced to a linear program for a fixed sequence which may be solved by a simple recursive procedure. It is proven that a “unit refueling sequence” composed of one tanker refueling at each of K₁ refueling operations is optimal. In addition, the problem of designing the “minimum fleet” (minimum number of tankers) required for a given set of K₂ nontankers to attain maximal range is resolved. Also studied are extensions to the problem with a constraint on the number of refueling operations, different nontanker recovery base geometry, and refueling on the return trip.     

Algorithms for the minimax transportation problem

In this paper, we consider a variant of the classical transportation problem as well as of the bottleneck transportation problem, which we call the minimax transportation problem. The problem considered is to determine a feasible flow x_ij from a set of origins I to a set of destinations J for which max_(i,j)εIxJ{c_ijx_ij} is minimum. In this paper, we develop a parametric algorithm and a primal-dual algorithm to solve this problem. The parametric algorithm solves a transportation problem with parametric upper bounds and the primal-dual algorithm solves a sequence of related maximum flow problems. The primal-dual algorithm is shown to be polynomially bounded. Numerical investigations with both the algorithms are described in detail. The primal-dual algorithm is found to be computationally superior to the parametric algorithm and it can solve problems up to 1000 origins, 1000 destinations and 10,000 arcs in less than 1 minute on a DEC 10 computer system. The optimum solution of the minimax transportation problem may be noninteger. We also suggest a polynomial algorithm to convert this solution into an integer optimum solution.     

A heuristic routine for solving large loading problems

The loading problem involves the optimal allocation of n objects, each having a specified weight and value, to m boxes, each of specified capacity. While special cases of these problems can be solved with relative ease, the general problem having variable item weights and box sizes can become very difficult to solve. This paper presents a heuristic procedure for solving large loading problems of the more general type. The procedure uses a surrogate procedure for reducing the original problem to a simpler knapsack problem, the solution of which is then employed in searching for feasible solutions to the original problem. The procedure is easy to apply, and is capable of identifying optimal solutions if they are found.     

Approximation schemes for ordered vector packing problems

In this paper we deal with the d‐dimensional vector packing problem, which is a generalization of the classical bin packing problem in which each item has d distinct weights and each bin has d corresponding capacities. We address the case in which the vectors of weights associated with the items are totally ordered, i.e., given any two weight vectors a_i, a_j, either a_i is componentwise not smaller than a_j or a_j is componentwise not smaller than a_i. An asymptotic polynomial‐time approximation scheme is constructed for this case. As a corollary, we also obtain such a scheme for the bin packing problem with cardinality constraint, whose existence was an open question to the best of our knowledge. We also extend the result to instances with constant Dilworth number, i.e., instances where the set of items can be partitioned into a constant number of totally ordered subsets. We use ideas from classical and recent approximation schemes for related problems, as well as a nontrivial procedure to round an LP solution associated with the packing of the small items. © 2002 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

Scheduling jobs and maintenance activities on parallel machines

Most machine scheduling models assume that the machines are available all of the time. However, in most realistic situations, machines need to be maintained and hence may become unavailable during certain periods. In this paper, we study the problem of processing a set of n jobs on m parallel machines where each machine must be maintained once during the planning horizon. Our objective is to schedule jobs and maintenance activities so that the total weighted completion time of jobs is minimized. Two cases are studied in this paper. In the first case, there are sufficient resources so that different machines can be maintained simultaneously if necessary. In the second case, only one machine can be maintained at any given time. In this paper, we first show that, even when all jobs have the same weight, both cases of the problem are NP-hard. We then propose branch and bound algorithms based on the column generation approach for solving both cases of the problem. Our algorithms are capable of optimally solving medium sized problems within a reasonable computational time. We note that the general problem where at most j machines, 1 ≤ j ≤ m, can be maintained simultaneously, can be solved similarly by the column generation approach proposed in this paper. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 145–165, 2000     

On the uncapacitated K‐commodity network design problem with zero flow‐costs

Extending Sastry's result on the uncapacitated two‐commodity network design problem, we completely characterize the optimal solution of the uncapacitated K‐commodity network design problem with zero flow costs for the case when K = 3. By solving a set of shortest‐path problems on related graphs, we show that the optimal solutions can be found in O(n³) time when K = 3, where n is the number of nodes in the network. The algorithm depends on identifying a list of “basic patterns”; the number of basic patterns grows exponentially with K. We also show that the uncapacitated K‐commodity network design problem can be solved in O(n³) time for general K if K is fixed; otherwise, the time for solving the problem is exponential. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

Mathematical aspects of the 3 × n job-shop sequencing problem

The paper discusses mathematical properties of the well-known Bellman-Johnson 3 × n sequencing problem. Optimal rules for some special cases are developed. For the case min B_i ≥ maxA_j we find an optimal sequence of the 2 × n problem for machines B and C and move one item to the front of the sequence to minimize (7); when min B_i ≥ max C_j we solve a 2 × n problem for machines A and B and move one item to the end of the optimal sequence so as to minimize (9). There is also given a sufficient optimality condition for a solution obtained by Johnson's approximate method. This explains why this method so often produces an optimal solution.