Minimizing makespan in a multimode multiprocessor shop scheduling problem

We study the problem of multimode scheduling tasks on dedicated processors, with the objective of minimizing the maximum completion time. Each task can be undertaken in one among a set of predefined alternative modes, where each mode specifies a required set of dedicated processors and a processing time. At any time each processor can be used by a single task at most. General precedence constraints exist among tasks, and task preemption is not allowed. The problem consists of assigning a mode and a starting time to each task, respecting processor and precedence constraints, to minimize the time required to complete all tasks. The problem is NP-hard in several particular cases. In previous works, we studied algorithms in which a solution was obtained by means of an iterative procedure that combines mode assignment and sequencing phases separately. In this paper, we present some new heuristics where the decision on the mode assignment is taken on the basis of a partial schedule. Then, for each task, the mode selection and the starting time are chosen simultaneously considering the current processor usage. Different lower bounds are derived from a mathematical formulation of the problem and from a graph representation of a particular relaxed version of the problem. Heuristic solutions and lower bounds are evaluated on randomly generated test problems. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 893–911, 1999     

A note on the optimal scheduling of two parallel processors

The problem of minimizing mean flow time of two parallel processors is discussed. Prior results are briefly reviewed. A dynamic programming algorithm is presented which minimizes mean flow time for a set of n preordered jobs on two nonequivalent parallel processors. The algorithm is illustrated with an example problem. The computational experience is presented which illustrates the efficiency of the algorithm.     

Minimizing the sum of absolute lateness in single-machine and multimachine scheduling

Kanet addressed the problem of scheduling n jobs on one machine so as to minimize the sum of absolute lateness under a restrictive assumption on their common due date. This article extends the results to the problem of scheduling n jobs on m parallel identical processors in order to minimize the sum of absolute lateness. Also, a heuristic algorithm for a more general version with no restriction on the common due date, for the problem of n-job single-machine scheduling is presented and its performance is reported.     

Discrete equal‐capacity p‐median problem

This paper examines the discrete equal‐capacity p‐median problem that seeks to locate p new facilities (medians) on a network, each having a given uniform capacity, in order to minimize the sum of distribution costs while satisfying the demand on the network. Such problems arise, for example, in local access and transport area telecommunication network design problems where any number of a set of p facility units can be constructed at the specified candidate sites (hence, the net capacity is an integer multiple of a given unit capacity). We develop various valid inequalities, a separation routine for generating cutting planes that are specific members of such inequalities, as well as an enhanced reformulation that constructs a partial convex hull representation that subsumes an entire class of valid inequalities via its linear programming relaxation. We also propose suitable heuristic schemes for this problem, based on sequentially rounding the continuous relaxation solutions obtained for the various equivalent formulations of the problem. Extensive computational results are provided to demonstrate the effectiveness of the proposed valid inequalities, enhanced formulations, and heuristic schemes. The results indicate that the proposed schemes for tightening the underlying relaxations play a significant role in enhancing the performance of both exact and heuristic solution methods for this class of problems. © 2000 John & Sons, Inc. Naval Research Logistics 47: 166–183, 2000.     

Analysis of algorithms for two‐stage flowshops with multi‐processor task flexibility

In this article we introduce a 2‐machine flowshop with processing flexibility. Two processing modes are available for each task: namely, processing by the designated processor, and processing simultaneously by both processors. The objective studied is makespan minimization. This production environment is encountered in repetitive manufacturing shops equipped with processors that have the flexibility to execute orders either individually or in coordination. In the latter case, the product designer exploits processing synergies between two processors so as to execute a particular task much faster than a dedicated processor. This type of flowshop environment is also encountered in labor‐intensive assembly lines where products moving downstream can be processed either in the designated assembly stations or by pulling together the work teams of adjacent stations. This scheduling problem requires determining the mode of operation of each task, and the subsequent scheduling that preserves the flowshop constraints. We show that the problem is ordinary NP‐complete and obtain an optimal solution using a dynamic programming algorithm with considerable computational requirements for medium and large problems. Then, we present a number of dynamic programming relaxations and analyze their worst‐case error performance. Finally, we present a polynomial time heuristic with worst‐case error performance comparable to that of the dynamic programming relaxations. © 2003 Wiley Periodicals, Inc. Naval Research Logistics, 2004.     

A generalization of the weighted set covering problem

We study a generalization of the weighted set covering problem where every element needs to be covered multiple times. When no set contains more than two elements, we can solve the problem in polynomial time by solving a corresponding weighted perfect b‐matching problem. In general, we may use a polynomial‐time greedy heuristic similar to the one for the classical weighted set covering problem studied by D.S. Johnson [Approximation algorithms for combinatorial problems, J Comput Syst Sci 9 (1974), 256–278], L. Lovasz [On the ratio of optimal integral and fractional covers, Discrete Math 13 (1975), 383–390], and V. Chvatal [A greedy heuristic for the set‐covering problem, Math Oper Res 4(3) (1979), 233–235] to get an approximate solution for the problem. We find a worst‐case bound for the heuristic similar to that for the classical problem. In addition, we introduce a general type of probability distribution for the population of the problem instances and prove that the greedy heuristic is asymptotically optimal for instances drawn from such a distribution. We also conduct computational studies to compare solutions resulting from running the heuristic and from running the commercial integer programming solver CPLEX on problem instances drawn from a more specific type of distribution. The results clearly exemplify benefits of using the greedy heuristic when problem instances are large. © 2003 Wiley Periodicals, Inc. Naval Research Logistics, 2005     

Capacity improvement,penalties, and the fixed charge transportation problem

Capacity improvement and conditional penalties are two computational aides for fathoming subproblems in a branch‐and‐bound procedure. In this paper, we apply these techniques to the fixed charge transportation problem (FCTP) and show how relaxations of the FCTP subproblems can be posed as concave minimization problems (rather than LP relaxations). Using the concave relaxations, we propose a new conditional penalty and three new types of capacity improvement techniques for the FCTP. Based on computational experiments using a standard set of FCTP test problems, the new capacity improvement and penalty techniques are responsible for a three‐fold reduction in the CPU time for the branch‐and‐bound algorithm and nearly a tenfold reduction in the number of subproblems that need to be evaluated in the branch‐and‐bound enumeration tree. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 341–355, 1999     

Rescheduling to minimize makespan on a changing number of identical processors

We consider the problem of rescheduling n jobs to minimize the makespan on m parallel identical processors when m changes value. We show this problem to be NP-hard in general. Call a list schedule totally optimal if it is optimal for all m = 1, …,n. When n is less than 6, there always exists a totally optimal schedule, but for n ≥ 6 this can fail. We show that an exact solution is less robust than the largest processing time first (LPT) heuristic and discuss implications for polynomial approximation schemes and hierarchical planning models.     

Scheduling jobs to two machines subject to batch arrival ordering

The problem considered is to assign n jobs to two processors so as to minimize the total flow time, with the constraint that a predetermined partial ordering (induced by batch arrivals) must be preserved within the subset of jobs assigned to each processor. An efficient algorithm of time 0(n⁵) is developed, and computational experience is reported.     

Algorithm to solve a chance‐constrained network capacity design problem with stochastic demands and finite support

We consider the problem of determining the capacity to assign to each arc in a given network, subject to uncertainty in the supply and/or demand of each node. This design problem underlies many real‐world applications, such as the design of power transmission and telecommunications networks. We first consider the case where a set of supply/demand scenarios are provided, and we must determine the minimum‐cost set of arc capacities such that a feasible flow exists for each scenario. We briefly review existing theoretical approaches to solving this problem and explore implementation strategies to reduce run times. With this as a foundation, our primary focus is on a chance‐constrained version of the problem in which α% of the scenarios must be feasible under the chosen capacity, where α is a user‐defined parameter and the specific scenarios to be satisfied are not predetermined. We describe an algorithm which utilizes a separation routine for identifying violated cut‐sets which can solve the problem to optimality, and we present computational results. We also present a novel greedy algorithm, our primary contribution, which can be used to solve for a high quality heuristic solution. We present computational analysis to evaluate the performance of our proposed approaches. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 236–246, 2016     

Integrated scheduling of loading and transportation with tractors and semitrailers separated

Motivated by some practical applications, we study a new integrated loading and transportation scheduling problem. Given a set of jobs, a single crane is available to load jobs, one by one, onto semitrailers with a given capacity. Loaded semitrailers are assigned to tractors for transportation tasks. Subject to limited resources (crane, semitrailers, and tractors), the problem is to determine (1) an assignment of jobs to semitrailers for loading tasks, (2) a sequence for the crane to load jobs onto semitrailers, (3) an assignment of loaded semitrailers to tractors for transportation tasks, and (4) a transportation schedule of assigned tractors such that the completion time of the last transportation task is minimized. We first formulate the problem as a mixed integer linear programming model (MILPM) and prove that the problem is strongly NP‐hard. Then, optimality properties are provided which are useful in establishing an improved MILPM and designing solution algorithms. We develop a constructive heuristic, two LP‐based heuristics, and a recovering beam search heuristic to solve this problem. An improved procedure for solutions by heuristics is also presented. Furthermore, two branch‐and‐bound (B&B) algorithms with two different lower bounds are developed to solve the problem to optimality. Finally, computational experiments using both real data and randomly generated data demonstrate that our heuristics are highly efficient and effective. In terms of computational time and the number of instances solved to optimality in a time limit, the B&B algorithms are better than solving the MILPM. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 416–433, 2015     

Parallel machine scheduling with eligibility constraints: A composite dispatching rule to minimize total weighted tardiness

We study a parallel machine scheduling problem, where a job j can only be processed on a specific subset of machines M_j, and the M_j subsets of the n jobs are nested. We develop a two‐phase heuristic for minimizing the total weighted tardiness subject to the machine eligibility constraints. In the first phase, we compute the factors and statistics that characterize a problem instance. In the second phase, we propose a new composite dispatching rule, the Apparent Tardiness Cost with Flexibility considerations (ATCF) rule, which is governed by several scaling parameters of which the values are determined by the factors obtained in the first phase. The ATCF rule is a generalization of the well‐known ATC rule which is very widely used in practice. We further discuss how to improve the dispatching rule using some simple but powerful properties without requiring additional computation time, and the improvement is quite satisfactory. We apply the Sequential Uniform Design Method to design our experiments and conduct an extensive computational study, and we perform tests on the performance of the ATCF rule using a real data set from a large hospital in China. We further compare its performance with that of the classical ATC rule. We also compare the schedules improved by the ATCF rule with what we believe are Near Optimal schedules generated by a general search procedure. The computational results show that especially with a low due date tightness, the ATCF rule performs significantly better than the well‐known ATC rule generating much improved schedules that are close to the Near Optimal schedules. © 2017 Wiley Periodicals, Inc. Naval Research Logistics 64: 249–267, 2017     

Hu's precedence tree scheduling algorithm: A simple proof

This article presents a simple proof of Hu's algorithm for scheduling in minimum time a set of tasks constrained by precedence tree constraints, each task requiring a unit time to complete, and where m processors are available.     

A branch and bound algorithm for computing optimal replacement policies in consecutive k‐out‐of‐n‐systems

This paper presents a branch and bound algorithm for computing optimal replacement policies in a discrete‐time, infinite‐horizon, dynamic programming model of a binary coherent system with n statistically independent components, and then specializes the algorithm to consecutive k‐out‐of‐n systems. The objective is to minimize the long‐run expected average undiscounted cost per period. (Costs arise when the system fails and when failed components are replaced.) An earlier paper established the optimality of following a critical component policy (CCP), i.e., a policy specified by a critical component set and the rule: Replace a component if and only if it is failed and in the critical component set. Computing an optimal CCP is a optimization problem with n binary variables and a nonlinear objective function. Our branch and bound algorithm for solving this problem has memory storage requirement O(n) for consecutive k‐out‐of‐n systems. Extensive computational experiments on such systems involving over 350,000 test problems with n ranging from 10 to 150 find this algorithm to be effective when n ≤ 40 or k is near n. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 288–302, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10017     

Cyclical job sequencing on multiple sets of identical machines

The problem posed in this paper is to sequence or route n jobs, each originating at a particular location or machine, undergoing r?1 operations or repairs, and terminating at the location or machine from which it originated. The problem is formulated as a 0-1 integer program, with block diagonal structure, comprised of r assignment subproblems; and a joint set of constraints to insure cyclical squences. To obtain integer results the solutions to each subproblem are ranked as required and combinations thereof are implicitly enumerated. The procedure may be terminated at any step to obtain an approximate solution. Some limited computational results are presented.     

Bi‐objective missile rescheduling for a naval task group with dynamic disruptions

This paper considers the rescheduling of surface‐to‐air missiles (SAMs) for a naval task group (TG), where a set of SAMs have already been scheduled to intercept a set of anti‐ship missiles (ASMs). In missile defense, the initial engagement schedule is developed according to the initial state of the defensive and attacking units. However, unforeseen events may arise during the engagement, creating a dynamic environment to be handled, and making the initial schedule infeasible or inefficient. In this study, the initial engagement schedule of a TG is assumed to be disrupted by the occurrence of a destroyed ASM, the breakdown of a SAM system, or an incoming new target ASM. To produce an updated schedule, a new biobjective mathematical model is formulated that maximizes the no‐leaker probability value for the TG and minimizes the total deviation from the initial schedule. With the problem shown to be NP‐hard, some special cases are presented that can be solved in polynomial time. We solve small size problems by the augmented ? ‐ constraint method and propose heuristic procedures to generate a set of nondominated solutions for larger problems. The results are presented for different size problems and the total effectiveness of the model is evaluated.     

A heuristic algorithm for determining replacement policies in k-out-of-n systems

The authors study a discrete-time, infinite-horizon, dynamic programming model for the replacement of components in a binary k-out-of-n failure system. (The system fails when k or more of its n components fail.) Costs are incurred when the system fails and when failed components are replaced. The objective is to minimize the long-run expected average undiscounted cost per period. A companion article develops a branch-and-bound algorithm for computing optimal policies. Extensive computational experiments find it effective for k to be small or near n; however, difficulties are encountered when n ≥ 30 and 10 ≤ k ≤ n − 4. This article presents a simple, intuitive heuristic rule for determining a replacement policy whose memory storage and computation time requirements are O(n − k) and O(n(n − k) + k), respectively. This heuristic is based on a plausible formula for ranking components in order of their usefulness. The authors provide sufficient conditions for it to be optimal and undertake computational experiments that suggest that it handles parallel systems (k = n) effectively and, further, that its effectiveness increases as k moves away from n. In our test problems, the mean relative errors are under 5% when n ≤ 100 and under 2% when k ≤ n − 3 and n ≤ 50. © 1997 John Wiley & Sons, Inc. Naval Research Logistics 44, 273–286, 1997.     

A heuristic routine for solving large loading problems

The loading problem involves the optimal allocation of n objects, each having a specified weight and value, to m boxes, each of specified capacity. While special cases of these problems can be solved with relative ease, the general problem having variable item weights and box sizes can become very difficult to solve. This paper presents a heuristic procedure for solving large loading problems of the more general type. The procedure uses a surrogate procedure for reducing the original problem to a simpler knapsack problem, the solution of which is then employed in searching for feasible solutions to the original problem. The procedure is easy to apply, and is capable of identifying optimal solutions if they are found.     

Lagrangian solution of maximum dispersion problems

We address the so‐called maximum dispersion problems where the objective is to maximize the sum or the minimum of interelement distances amongst a subset chosen from a given set. The problems arise in a variety of contexts including the location of obnoxious facilities, the selection of diverse groups, and the identification of dense subgraphs. They are known to be computationally difficult. In this paper, we propose a Lagrangian approach toward their solution and report the results of an extensive computational experimentation. Our results show that our Lagrangian approach is reasonably fast, that it yields heuristic solutions which provide good lower bounds on the optimum solution values for both the sum and the minimum problems, and further that it produces decent upper bounds in the case of the sum problem. For the sum problem, the results also show that the Lagrangian heuristic compares favorably against several existing heuristics. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 97–114, 2000     

Linear compound algorithms for the partitioning problem

For a given set S of nonnegative integers the partitioning problem asks for a partition of S into two disjoint subsets S₁ and S₂ such that the sum of elements in S₁ is equal to the sum of elements in S₂. If additionally two elements (the kernels) r₁, r₂ ∈ S are given which must not be assigned to the same set S_i, we get the partitioning problem with kernels. For these NP‐complete problems the authors present two compound algorithms which consist both of three linear greedylike algorithms running independently. It is shown that the worst‐case performance of the heuristic for the ordinary partitioning problem is 12/11, while the second procedure for partitioning with kernels has a bound of 8/7. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 593–601, 2000