水雷气动不平衡式发射轴向受力优化分析

基于水雷气动不平衡式发射内弹道数学模型,建立了轴向受力和出管速度的泛函表达式,以基本可行解为基准,对可行解区间进行了仿真计算,通过将轴向受力和出管速度函数在基本可行解处一阶泰勒展开,并采用分段函数表示可行解各分量的变化律,从而将非线性问题转化为线性规划问题,运用单纯形法进行优化求解,得到了最优发射条件.     

基于改进差分进化算法的内弹道参数优化

火炮内弹道参数直接影响其计算结果,内弹道参数优化设计是内弹道分析计算的重要环节。基于经典内弹道计算模型,以火药内弹道计算中最为敏感的燃速指数及其燃速系数为设计参量,以最大膛压及弹丸初速的计算值与测试值一致性为目标,对差分进化算法群体的初始化、变异因子及变异模式进行了改进,对某型火炮的内弹道参数进行了优化计算。优化设计结果表明改进后的差分进化算法满足内弹道设计工程实践要求,为内弹道参数优化设计提供了一种有效的算法。     

一种基于“GM(1,1)”模型的火炮初速灰预测方法

火炮初速量测是火炮进行弹道准备中的一项重要内容,运用灰色理论探讨火炮初速预测问题,既有利于提高火炮射击精度的修正,又有利于进一步完善火炮初速测量雷达的使用操作和改进设计。针对火炮初速随机变化的特点,基于灰色理论中的GM(1,1)模型,构建火炮初速灰预测模型,确定预测结果精度检验方法。最后通过一应用实例验证了该方法具有一定的合理性与实用性。     

Numerical research on adverse effect of muzzle flow formed by muzzle brake considering secondary combustion

The simulation of the artillery interior and intermediate ballistics problem is performed to investigate the influence of a gas dynamics device, muzzle brake, on the muzzle hazard phenomena, such as flash and blast waves. The correlation of the chemical reactions with the characteristics of the muzzle flow field is analyzed by the simulation for a further understanding of the secondary combustion phenom-enon of the muzzle flow. The novel structure of muzzle flow caused by the muzzle brake is presented by the simultaneous solution of the interior ballistics model and multi-species Navier-Stokes equations in order to analyze the influence of the muzzle brake structure on the chemical reactions. The secondary combustion of the muzzle flow due to the oxygen-supplement chemical reactions is obtained by the chemical reaction kinetic model. The interaction of the blast waves released from the muzzle brake is illustrated in detail and the mechanism of the formation of muzzle flash is analyzed. This research provides a reference for the studies on the suppression of the muzzle flash.     

遥控武器站总体结构参数优化研究

为减小遥控武器站炮口扰动以提高射击精度,建立了遥控武器站部分机构参数化三维模型、有限元模型和刚柔耦合动力学模型。基于多学科集成优化软件ModelCenter进行了系统集成,以减小炮口扰动为目标,建立了遥控武器站总体结构参数优化模型。采用多目标遗传算法对总体结构参数进行了优化,优化后炮口振动状况明显改善,与位移相关的起始撼动和与速度相关的起始扰动分别较原方案降低了17.05%和19.04%。     

A novel launch dynamics measurement system for multiple launch rocket system and comparative analysis with numerical simulations

In this paper,a novel launch dynamics measurement system based on the photoelectric sensor pair is built.The actual muzzle time(i.e.a time duration that originates from the initial movement to the rocket's departure from the muzzle)and the muzzle velocity are measured.Compared with the classical methods,the actual muzzle time is obtained by eliminating the ignition delay.The comparative analysis method is proposed with numerical simulations established by the transfer matrix method for multibody systems.The experiment results indicate that the proposed measurement system can effectively measure the actual muzzle time and reduce the error of classical methods,which match well with the simulation results showing the launch dynamics model is reliable and helpful for further analysis and design of the MLRS.     

A Measurement System for Railgun Test

A measurement system was designed to measure the railgun's parameters in launching process,which includes Rogowski coil sensor for measuring rail's current,B-dot probe for obversing projectile's velocity in bore,net target for catching muzzle velocity,signal condition circuit and high-speed data acquisition card for analyzing and storing data.Its software was also developed in WINDOWS operational environment via modularized design.The designed sensors and test software were successfully used in a practical electromagnetic railgun system to monitor the process of launching.The test results indicate that the state of launching can be intuitively observed and the parameters are accurately acquired and recorded.The software design method can shorten the development cycle,enhance the system's flexibility and provide the interface for the secondary development.The system shows great reliability.It is an effective and practical measurement platform for further research on the electromagnetic launch system.     

防暴发射器身管长度优化研究

为解决某型防暴发射器身管设计不合理导致有效射程短的问题,以仿真设计的方法,运用Matlab计算软件对其进行了内弹道模拟仿真,获得了不同身管长度下该防暴发射器的膛压和速度曲线,确定了最优身管长度。然后利用ANsYs有限元分析软件,对延长身管后的模型进行了强度校核。仿真结果和实弹数据表明：防暴发射器身管长度设计合理,有效提高了其实际射程和作战效能,研究工作优化了防暴发射器的设计。     

弹/枪相互作用引起的运动步枪枪口振动分析

为研究身管结构参数变化对运动步枪枪口振动的影响规律,采用非线性有限元方法建立了运动步枪弹/枪相互作用数值计算模型。借助压力测试系统对运动步枪进行了膛压测试试验;使用高速摄影设备实测了枪口在发射过程中竖直方向的振动规律,通过对比枪口实测数据与数值计算结果验证了模型的正确性。数值模型为研究参数变化对枪口振动的影响提供了理论基础,研究结果对工程实践具有一定实际意义。     

电磁轨道发射器动态发射过程的数值模拟

针对电磁轨道发射器动态发射过程的数值模拟问题,基于矢量磁位A和时间积分标量电位V,采用节点单元法,并选择运动坐标系描述运动问题,推导出动态发射下的电磁轨道发射器三维涡流场有限元离散方程。结合温度场控制方程,建立电磁轨道发射器的三维电磁-温度耦合有限元模型。针对一个电磁轨道发射器动态发射问题,对模型进行数值模拟,得到了动态发射下轨道及电枢的温度场分布特点及发射器电感梯度随时间的变化规律。计算结果表明,模型计算出的脉冲电流峰值、出口电流大小、出口速度等参数均与试验结果吻合较好,验证了所开发的有限元程序代码的正确性。     

Interception probability simulation and analysis of salvo of two electromagnetic coil launched anti-torpedo torpedoes

Electromagnetic coil launch is an important branch of electromagnetic launch (EML) technology, which is suitable for launching anti-torpedo torpedo (ATT). This paper focuses on the EML parameters and the interception probability of the EML two ATTs salvo. Based on the launching model of a multi-stage coil launcher, the trajectory model of the ATT and the attacking torpedo, a calculation method for the EML two ATTs salvo parameters is proposed, with the conditions of capture and interception given reasonably. An adaptive particle swarm optimization (APSO) algorithm is proposed to calculate the optimal launching parameters, by designing the adaptive inertia weight and time-varying study factors. According to the analysis of the simulation with Monte Carlo method, EML will improve the interception probability effectively, and the interception probability is affected by the launching range. The results demonstrate good performance of the proposed APSO in calculating EML parameters for the two ATTs salvo in certain combat situation. Implications of these results are particular regarding the command and decision in the anti-torpedo combat.     

基于混沌量子粒子群的舰炮身管多目标优化研究

舰炮的炮口扰动是影响舰炮射击精度的重要因素。为了减少舰炮的炮口扰动，优化身管结构，建立了柔性身管的有限元模型并将该模型的模态计算结果与模态试验测试值进行对比,证明建立的柔性身管有限元模型是有效的。提出了混沌量子粒子群算法与动力学联合优化的方法，进行身管和炮口的多目标优化，优化结果表明：优化后的炮口中心的线速度、角速度和角位移与优化前相比显著减小，身管质量有所降低，结构更加合理，该优化方法有效可行，为下一步全炮总体优化设计提供了一定的借鉴。     

电磁发射弹丸飞行弹道仿真

针对电磁发射弹丸飞行弹道进行仿真研究，在建立刚体六自由度飞行弹道模型的基础上，采用时频分析和涡流分析方法，建立电磁-动力学耦合模型分析弹丸出膛时由于膛内振动带来的炮口扰动，采用动网格技术建立电磁-气动耦合模型分析弹托分离产生的气动扰动，从而得到了电磁发射弹丸的飞行弹道模型。以得克萨斯大学先进技术研究所设计的IAT-HVP为例，仿真分析了弹丸以1117 m/s初速、0°射角出膛时弹丸出口扰动对弹体速度和气动特性的影响，并得到其飞行200 m的弹道曲线。仿真结果表明，受电磁发射一体化弹丸出口扰动的影响，弹体落点相比理想弹道产生了24%的偏差，其中炮口扰动引起的偏差最大，其次是弹托分离。     

Modeling and simulation of muzzle flow field of railgun with metal vapor and arc

During the electromagnetic railgun launching process, there will be a complex flow field with high temperature in the muzzle area because of the high-speed friction, transition and secondary arc-ignition. This paper models the muzzle area of railgun when the projectile is far away from the muzzle, and the dynamic simulation of the flow field with secondary arc in the muzzle area is carried out based on the magneto hydrodynamic equations. Meanwhile, a multi-component plasma transport model is used to analyze the muzzle arc plasma flow process of the mixed gas of Al vapor and the air. Furthermore, the pressure boundary conditions are fitted by the dynamic mesh simulation results. The current and voltage of the muzzle are obtained through the emission experiment of the railgun experimental prototype. We load the current data into the simulation model and the voltage of experiments and simulations are compared, which proves the accuracy of the simulation. Then the plasma temperature and the composition of Al vapor in the muzzle flow process are analyzed in-depth.     

自航式鱼雷发射装置发射管长度优化研究

基于某型鱼雷自航发射的内弹道数学模型,选择自航管的总长度作为优化目标,讨论了约束函数的取值,确定了优化问题的数学表达.采用惩罚函数法进行寻优计算,针对约束函数具有不可微和非线性的特点,采用模式搜索算法进行了无约束优化的求解,给出了优化结果并进行了比较.     

基于刚柔耦合的坦克炮发射动力学仿真分析

炮口扰动是影响坦克炮射击精度的重要因素，为研究弹丸出炮口瞬间的炮口扰动规律，基于多体动力学与有限元方法构建了坦克刚柔耦合的全车动力学仿真模型，该模型考虑了身管的柔性特性，对身管进行了模态分析，得到了身管的模态中性文件。通过仿真，对比了后坐部分最大后坐位移与最大后坐速度的试验值与仿真值，对刚柔耦合模型的仿真结果进行了验证。在此基础上，分析了刚性身管和柔性身管对炮口扰动的影响，结果表明：考虑身管柔性特性的刚柔耦合模型能够有效提高坦克炮射击仿真精度。     

基于炮口雷达的初速综合预测技术

初速对火炮的"首发命中"影响较大.因而,预估初速的各种方法纷纷出台.从发射药、火炮两个不同角度分别测算初速偏差是以往的主要方法.初速综合预测技术首次以炮口测速雷达的测量数据为基础预测初速,预测效果和使用等问题被普遍关注.本着应用原则,从工程实现中的焦点问题出发,提供了在现有指挥平台上应用的方法.     

Augmented nested sampling for stochastic programs with recourse and endogenous uncertainty

We propose a novel simulation‐based approach for solving two‐stage stochastic programs with recourse and endogenous (decision dependent) uncertainty. The proposed augmented nested sampling approach recasts the stochastic optimization problem as a simulation problem by treating the decision variables as random. The optimal decision is obtained via the mode of the augmented probability model. We illustrate our methodology on a newsvendor problem with stock‐dependent uncertain demand both in single and multi‐item (news‐stand) cases. We provide performance comparisons with Markov chain Monte Carlo and traditional Monte Carlo simulation‐based optimization schemes. Finally, we conclude with directions for future research.     

轮式突击炮行进间射击炮口振动分析及稳定控制

为了研究不同因素对炮口振动的影响规律,建立了轮式突击炮行进间射击多体动力学模型,并与试验结果对比验证了合理性。路面谱采用谐波叠加法建模,在不同路面条件和火线高情况下进行了仿真计算,获得了两种因素对行进间射击炮口振动的影响规律。构建了垂向稳定器模型,进行了联合仿真,对比了有、无稳定器两种情况下的炮口振动。结果表明:炮口振动幅值随路面粗糙度增大而增大;火线高对炮口振动的影响是非线性的;垂向稳定器能有效控制炮口振动,相较于无稳定器情况,开炮前炮口最大高低角和高低角速度幅值分别降低了94.1%和97.4%,开炮后炮口最大高低角振动幅值降低了16.2%。该研究对轮式突击炮的总体设计起到了一定理论支撑,具有重要工程应用价值。     

基于耳轴轴承非线性的炮口响应分析

针对火炮耳轴轴承接触的非线性问题进行研究,推导了耳轴轴承接触刚度计算式,提出在ADAMS中考虑间隙和接触非线性的转动铰建模方法．基于多体动力学和接触理论,建立考虑耳轴轴承间隙的某自行火炮发射动力学模型,并对不同间隙水平下的炮口垂向扰动情况进行分析．仿真结果表明：由于非线性的存在,随着间隙水平的增加,3个垂向扰动指标（角位移、速度、角速度）并非单调或线性变化,但其在取值区间上存在一个平稳值（0．22-0．28mm）,耳轴间隙在该范围内能够保证射击精度的稳定性．