Investigating the surface integrity of aluminium based composites machined by EDM

In the present work, the surface characteristics of Electrical Discharge Machined (EDM) Al (6351)SiC and Al (6351)SiCB₄C composites are investigated. The composites are prepared by employing the conventional stir casting technique, as it can produce better particle dispersion in the matrix. The detailed experimental study is performed on the composites by varying current (I), duty factor (τ), pulse on time (T_on), and the gap voltage (V) in order to analyze the Heat Affected Zone (HAZ) formed in the sub surface and the average crater diameter formed on the machined surface of the composites as an output function. The formation of recast layers, presence of bubbles and the surface texture of the composites at various machining conditions are observed. The results show that the increased Metal Removal Rate (MRR) increases the depth of HAZ and the average crater diameter on the machined area. Further, the addition of B₄C particles to the composite produces more surface defect than the AlSiC composite.     

Cell structure of microcellular combustible object foamed by supercritical carbon dioxide

In order to solve the issue that the combustible objects for cased telescoped ammunition (CTA) didn't burn completely during the combustion process, the microcellular combustible objects were foamed with numerous cells in the micron order to improve the combustion performance by the supercritical carbon dioxide (SCCO₂) foaming technology. As the cell structure determined the combustion properties of microcellular combustible objects, the solubility of SCCO₂ dissolved into the combustible objects was obtained from the gravimetric method, and scanning electron microscope (SEM) was applied to characterize the cell structure under various process conditions of solubility, foaming temperature and foaming time. SEM images indicate that the cell diameter of microcellular combustible objects is in the level of 1 μm and the cell density is about 10¹¹ cell⋅cm⁻³. The microcellular combustible objects fabricated by the SCCO₂ foaming technology are smooth and uniform, and the high specific surface area of cell structure can lead to the significant combustion performance of microcellular combustible object for CTA in the future.     

Heavy metal free primers: Polymorphism of gadolinium and titanium in the context of GSR glass phase

The possibility of identifying gunshot residue (GSR) particles produced by non-toxic primers containing only titanium and zinc is a very difficult task using SEM/EDX analysis employed in the analysis of GSR originating from primers containing lead, barium and antimony. However, Bauer et al. demonstrated that non-toxic (TiZn) primers form a TiZn₂O₄ spinel crystalline structure using SEM/EDX with EBSD (Electron Back Scatter Diffraction) and TKD (Transmission Kikuchi Diffraction), whereas GSR originating from gadolinium-doped TiZn primers form a non-crystalline glass phase. Here, a possible explanation of these different phenomena is hypothesized.     

Theoretical study of an energetic material di-1H-1,3,4-triazole derivatives

Computations by density functional theory (DFT) method are performed on a series of di-1H-1,3,4-triazole derivatives with different substituents and linkages. The heat of formation (HOF) is predicted by the designed isodesmic reactions. The predicted results reveal that –N₃ and –NN– groups are effective structural units for increasing the HOF values of the di-1H-1,3,4-triazole derivatives. The HOMO–LUMO gap is affected by the substituents and linkage groups. Detonation performance is evaluated using the Kamlet–Jacobs approach based on the calculated density and HOF. The results indicate that –NO₂, –NF₂, –NH–, –NH–NH– and –NN– groups are helpful for enhancing the detonation properties of di-1H-1,3,4-triazole derivatives. The bond dissociation energy and bond order of the weakest bonds are analyzed to investigate their stability. It is observed that the –CH₂–, –CH₂–CH₂– and –CHCH– groups are effective structural units for improving the stabilities of these derivatives. Considering the detonation performance and the stability, five compounds are screened as the potential candidates for high energy density materials.     

Estimating component characteristics from system failure‐time data

Suppose that failure times are available from a random sample of N systems of a given, fixed design with components which have i.i.d. lifetimes distributed according to a common distribution F. The inverse problem of estimating F from data on observed system lifetimes is considered. Using the known relationship between the system and component lifetime distributions via signature and domination theory, the nonparametric maximum likelihood estimator _N(t) of the component survival function (t) is identified and shown to be accessible numerically in any application of interest. The asymptotic distribution of _N(t) is also identified, facilitating the construction of approximate confidence intervals for (t) for N sufficiently large. Simulation results for samples of size N = 50 and N = 100 for a collection of five parametric lifetime models demonstrate the utility of the recommended estimator. Possible extensions beyond the i.i.d. framework are discussed in the concluding section. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

Inventory policies for a make‐to‐order system with a perishable component and fixed ordering cost

We consider a make‐to‐order production system where two major components, one nonperishable (referred to as part 1) and one perishable (part 2), are needed to fulfill a customer order. In each period, replenishment decisions for both parts need to be made jointly before demand is realized and a fixed ordering cost is incurred for the nonperishable part. We show that a simple (s_n,S,S) policy is optimal. Under this policy, S along with the number of backorders at the beginning of a period if any and the availability of the nonperishable part (part 1) determines the optimal order quantity of the perishable part (part 2), while (s_n,S) guide when and how much of part 1 to order at each state. Numerical study demonstrates that the benefits of using the joint replenishment policy can be substantial, especially when the unit costs are high and/or the profit margin is low. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009     

On online bin packing with LIB constraints

In many applications of packing, the location of small items below large items, inside the packed boxes, is forbidden. We consider a variant of the classic online one‐dimensional bin packing, in which items allocated to each bin are packed there in the order of arrival, satisfying the condition above. This variant is called online bin packing problem with LIB (larger item in the bottom) constraints. We give an improved analysis of First Fit showing that its competitive ratio is at most , and design a lower bound of 2 on the competitive ratio of any online algorithm. In addition, we study the competitive ratio of First Fit as a function of an upper bound (where d is a positive integer) on the item sizes. Our upper bound on the competitive ratio of First Fit tends to 2 as d grows, whereas the lower bound of two holds for any value of d. Finally, we consider several natural and well known algorithms, namely, Best Fit, Worst Fit, Almost Worst Fit, and Harmonic, and show that none of them has a finite competitive ratio for the problem. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009     

Scheduling multiple products on parallel machines with setup costs

We consider a class of production scheduling models with m identical machines in parallel and k different product types. It takes a time p_i to produce one unit of product type i on any one of the machines. There is a demand stream for product type i consisting of n_i units with each unit having a given due date. Before a machine starts with the production of a batch of products of type i a setup cost c is incurred. We consider several different objective functions. Each one of the objective functions has three components, namely a total setup cost, a total earliness cost, and a total tardiness cost. In our class of problems we find a relatively large number of problems that can be solved either in polynomial time or in pseudo‐polynomial time. The polynomiality or pseudo‐polynomiality is achieved under certain special conditions that may be of practical interest; for example, a regularity pattern in the string of due dates combined with earliness and tardiness costs that are similar for different types of products. The class of models we consider includes as special cases discrete counterparts of a number of inventory models that have been considered in the literature before, e.g., Wagner and Whitin (Manage Sci 5 (1958), 89–96) and Zangwill (Oper Res 14 (1966), 486–507; Manage Sci 15 (1969), 506–527). © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

Transporting jobs through a two‐machine open shop

We consider the two‐machine open shop scheduling problem in which the jobs are brought to the system by a single transporter and moved between the processing machines by the same transporter. The purpose is to split the jobs into batches and to find the sequence of moves of the transporter so that the time by which the completed jobs are collected together on board the transporter is minimal. We present a ‐approximation algorithm. © 2008 Wiley Periodicals, Inc. Naval Research Logistics 2009     

Scheduling parallel machines with inclusive processing set restrictions and job rejection

In this article, we study a parallel machine scheduling problem with inclusive processing set restrictions and the option of job rejection. In the problem, each job is compatible to a subset of machines, and machines are linearly ordered such that a higher‐indexed machine can process all those jobs that a lower‐indexed machine can process (but not conversely). To achieve a tight production due date, some of the jobs might be rejected at certain penalty. We first study the problem of minimizing the makespan of all accepted jobs plus the total penalty cost of all rejected jobs, where we develop a ‐approximation algorithm with a time complexity of . We then study two bicriteria variants of the problem. For the variant problem of minimizing the makespan subject to a given bound on the total rejection cost, we develop a ‐approximation algorithm with a time complexity of . For the variant problem of maximizing the total rejection cost of the accepted jobs subject to a given bound on the makespan, we present a 0.5‐approximation algorithm with a time complexity of . © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 667–681, 2017     

Scheduling parallel machines with inclusive processing set restrictions

We consider the problem of assigning a set of jobs to different parallel machines of the same processing speed, where each job is compatible to only a subset of those machines. The machines can be linearly ordered such that a higher‐indexed machine can process all those jobs that a lower‐indexed machine can process. The objective is to minimize the makespan of the schedule. This problem is motivated by industrial applications such as cargo handling by cranes with nonidentical weight capacities, computer processor scheduling with memory constraints, and grades of service provision by parallel servers. We develop an efficient algorithm for this problem with a worst‐case performance ratio of + ε, where ε is a positive constant which may be set arbitrarily close to zero. We also present a polynomial time approximation scheme for this problem, which answers an open question in the literature. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

Technical note: Finite-time regret analysis of Kiefer-Wolfowitz stochastic approximation algorithm and nonparametric multi-product dynamic pricing with unknown demand

We consider the problem of nonparametric multi-product dynamic pricing with unknown demand and show that the problem may be formulated as an online model-free stochastic program, which can be solved by the classical Kiefer-Wolfowitz stochastic approximation (KWSA) algorithm. We prove that the expected cumulative regret of the KWSA algorithm is bounded above by where κ₁, κ₂ are positive constants and T is the number of periods for any T = 1, 2, … . Therefore, the regret of the KWSA algorithm grows in the order of , which achieves the lower bounds known for parametric dynamic pricing problems and shows that the nonparametric problems are not necessarily more difficult to solve than the parametric ones. Numerical experiments further demonstrate the effectiveness and efficiency of our proposed KW pricing policy by comparing with some pricing policies in the literature.     

二维 DFT 和 DCT 的 Systolic 阵列

超级计算中一个活跃的研究领域是将某些有限和,如离散富里叶变换(DFT)、离散余弦变换(DCT),映射到多处理机阵列上。本文首先通过二维DFT的行列分解算法流程图,给出了计算二维DFT的二种Systolic阵列:一种是由N_1个处理器组成的线性阵列,所花时间步为O(N_1N_2)(设二维DFT为N_1×N_2长的),与行列分解算法在单处理机上顺序执行所花时间相比,加速比为O(N)(设N_1=N_2=N)。这一结果无论是在时间消耗,还是在PE数量上都是目前最优的。另一种是由N_1×N_2个处理器组成的矩形阵列,所需时间为O(N_1+N_2),与行列算法在单处理机上顺序运行所花时间相比,加速比为O(N~2)(这里仍假定N_1=N_2=N)。本文还给出了二维DCT的与二维DFT相似的Systoilc阵列结构。不难将上述阵列推广到多维的情况。     

Studies on the flame propagation characteristic and thermal hazard of the premixed N2O/fuel mixtures

An experimental study was carried out to investigate the flame propagation and thermal hazard of the premixed N₂O/fuel mixtures, including NH₃, C₃H₈ and C₂H₄. The study provided the high speed video images and data about the flame locations, propagation patterns, overpressures and the quenching diameters during the course of combustion in different channels to elucidate the dynamics of various combustion processes. The onset decomposition temperature was determined using high-performance adiabatic calorimetry. It was shown that the order of the flame acceleration rate and thermal hazard was N₂O/C₂H₄>N₂O/C₃H₈>N₂O/NH₃.     

Level workforce planning for multistage transfer lines

In this article, we define two different workforce leveling objectives for serial transfer lines. Each job is to be processed on each transfer station for c time periods (e.g., hours). We assume that the number of workers needed to complete each operation of a job in precisely c periods is given. Jobs transfer forward synchronously after every production cycle (i.e., c periods). We study two leveling objectives: maximin workforce size () and min range (R). Leveling objectives produce schedules where the cumulative number of workers needed in all stations of a transfer line does not experience dramatic changes from one production cycle to the next. For and a two‐station system, we develop a fast polynomial algorithm. The range problem is known to be NP‐complete. For the two‐station system, we develop a very fast optimal algorithm that uses a tight lower bound and an efficient procedure for finding complementary Hamiltonian cycles in bipartite graphs. Via a computational experiment, we demonstrate that range schedules are superior because not only do they limit the workforce fluctuations from one production cycle to the next, but they also do so with a minor increase in the total workforce size. We extend our results to the m‐station system and develop heuristic algorithms. We find that these heuristics work poorly for min range (R), which indicates that special structural properties of the m‐station problem need to be identified before we can develop efficient algorithms. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 577–590, 2016     

Approximation algorithms for sequential batch‐testing of series systems

We introduce and study a generalization of the classic sequential testing problem, asking to identify the correct state of a given series system that consists of independent stochastic components. In this setting, costly tests are required to examine the state of individual components, which are sequentially tested until the correct system state can be uniquely identified. The goal is to propose a policy that minimizes the expected testing cost, given a‐priori probabilistic information on the stochastic nature of each individual component. Unlike the classic setting, where variables are tested one after the other, we allow multiple tests to be conducted simultaneously, at the expense of incurring an additional set‐up cost. The main contribution of this article consists in showing that the batch testing problem can be approximated in polynomial time within factor , for any fixed . In addition, we explain how, in spite of its highly nonlinear objective function, the batch testing problem can be formulated as an approximate integer program of polynomial size, while blowing up its expected cost by a factor of at most . Finally, we conduct extensive computational experiments, to demonstrate the practical effectiveness of these algorithms as well as to evaluate their limitations. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 275–286, 2016     

On a sequential rule for estimating the location parameter of an exponential distribution

Let us assume that observations are obtained at random and sequentially from a population with density function In this paper we consider a sequential rule for estimating μ when σ is unknown corresponding to the following class of cost functions In this paper we consider a sequential rule for estimating μ when σ is unknown corresponding to the following class of cost functions Where δ(X_I,…,X_N) is a suitable estimator of μ based on the random sample (X₁,…, X_N), N is a stopping variable, and A and p are given constants. To study the performance of the rule it is compared with corresponding “optimum fixed sample procedures” with known σ by comparing expected sample sizes and expected costs. It is shown that the rule is “asymptotically efficient” when absolute loss (p=-1) is used whereas the one based on squared error (p = 2) is not. A table is provided to show that in small samples similar conclusions are also true.     

On estimating the reliability of a component subject to several different stresses (strengths)

This paper is concerned with estimating p = P(X₁ < Y …, X_n < Y) or q =P (X < Y₁, …, X < Y_n) where the X's and Y's are all independent random variables. Applications to estimation of the reliability p from stress-strength relationships are considered where a component is subject to several stresses X₁, X₂, …, X_N whereas its strength, Y, is a single random variable. Similarly, the reliability q is of interest where a component is made of several parts all with their individual strengths Y₁, Y₂ …, Y_N and a single stress X is applied to the component. When the X's and Y's are independent and normal, maximum likelihood estimates of p and q have been obtained. For the case N = 2 and in some special cases, minimum variance unbiased estimates have been given. When the Y's are all exponential and the X is normal with known variance, but unknown mean (or uniform between 0 and θ, θ being unknown) the minimum variance unbiased estimate of q is established in this paper.