美军军事转型及其启示(下)

三、美国军事转型的主要特性(一)顶层设计,追求“跨越一代”的规划效果美国军事转型的最显著特点就是谋求跨越时代的超前性,这种谋求超前性的强烈欲望,一方面来自美国人强烈的时代感和机遇意识,另一方面来自他们居安思危的忧患意识。信息技术群的迅猛发展,深刻改变着社会生活的     

Parallel Sets的改进及其在全球恐怖袭击数据分析中的应用

随着恐怖主义愈演愈烈,"反恐"成为当今世界各国军事安全部门的中心任务.使用分类型可视化工具Parallel Sets分析国际恐怖主义数据库中多属性分类值间的关系,揭示数据库中的隐性信息,并针对Parallel Sets任意排列分类值产生较多交叉的不足,提出带降势的启发式分类值布局算法,自动优化分类值布局顺序,减轻视图中...     

Effect of projectile parameters on opening behavior of PELE penetrating RC target

When a penetrator with enhanced lateral effect (PELE) impacts on a reinforced concrete (RC) target, the target is damaged with a large opening. An understanding of how PELE projectile parameters affect the opening dimension, is essential for effective design of the PELE projectile. In this study, under the condition that the impact velocity and target parameters (strength and thickness) were fixed values, the important influence factors of the PELE (jacket wall thickness B, jacket material strength Y1, filling material strength Y2 and angle of monolithic jacketθ) were determined by a dimensional analysis. Tests and simulations of the PELE penetrating the RC target were conducted to analyze the influence of these factors on opening diameter ((D), an equivalent diameter under relative kinetic energy). Based on the test and simulation results, it is found that the influence of these factors B, Y1 andθon the deformation mode of the jacket shows a similar trend:as values of the three factors decrease, the jacket deforms from small bending deformation to large one, and then to curling deformation. This causes the opening diameter to first increase with the decrease of these three factors, and then decreases. It is well known that the bending resistance of the jacket is related to these factors B, Y1 andθ. Therefore, a plastic limit bending moment (M0) of the jacket was quoted to characterize the influence of these factors on the bending deformation of the jacket and the opening diameter of the target. The influence factor Y2 causes (D) to first increase with the increase of Y2, and then decreases. A formula was developed to predict the opening diameter, whose influence parameters were considered in a dimensionless way. It has been shown that the dimensionless opening diameter (D)/d1 is dependent on two dimensionless parameters Q = (d31fc/M0) and G = (fc/Y2), where d1 and fc are the outer diameter of the projectile and the compressive strength of the target, respectively.     

Evaluation of infrared camouflage effectiveness via a multi-fractal method

This paper reports an alternative approach to the evaluation of infrared camouflage effectiveness via a multi-fractal method. By calculating multi-fractal spectra of the target region and the background re-gions in an infrared image, the spectrum shape features and the discrete Fréchet distances among these spectra were used to analyze the camouflage effectiveness of the target qualitatively and quantitatively, and the correlation coefficients of the spectra were further used as the index of camouflage effectiveness. It was found that the camouflaged target had better camouflage effectiveness than the target without camouflage in the same one background, and the same one camouflaged target had different camouflage effectiveness in different backgrounds. On the whole, the target matching well with its background had high camouflage effectiveness value. This approach can expand the application of multi-fractal theory in infrared camouflage technology, which should be useful for the research of infrared camouflage mate-rials, the design of camouflage patterns as well as the deployment of military equipment in battlefield.     

几种防锈液对T52钢在酸性介质中耐蚀性的影响

研究了几种防锈液对T52(10Ti热)钢在Ph=5.0酸性水溶液中耐蚀性能的影响.用线性极化和交流阻抗法对这些防锈液的耐蚀性能进行了综合评估,试验结果表明:亚硝酸钠类、含氨基和羧基的有机化合物类两种防锈液的耐蚀性能较好;并用动电位扫描法对上述防锈液的作用机理进行了初步探讨,试验表明:上述防锈液主要是抑制电极的阳极过程.     

利用Hough变换实现目标检测与航迹启动

经典的目标检测方法是Ｂａｙｅｓ方法，通常为门限检测。本文将利用Ｈｏｕｇｈ变换推导一种通过非相参积累实现目标检测和航迹启动的方法。针对目标的信噪比不同的情况，讨论了两种非相参积累形式，一种是直接积累，另一种是二值积累。二值积累在检测微弱目标时有独特的优越性。本文还讨论了两种非相参积累方法的理论检测性能。     

两段探测目标的传感器任务调度问题0-1规划模型及算法

为解决指挥系统控制中的调度困难,研究了一类特殊的传感器资源调度问。主要分析了跟踪目标的探测次数、时间间隔和传感器资源等约束条件。用跟踪目标的重要程度之和作为目标函数,建立了一个0-1规划的数学模型,再利用变换将其转化为0-1线性整数规划模型。利用割平面法求解得出最优调度策略,其能在工作量饱和的情况下合理调度传感器资源。为提高求解速度,提出了对应的模拟退火算法。通过对一些不同规模实例的求解,在资源利用率和算法的求解速度等指标上,与割平面法及遗传算法进行对比分析,验证了模型的有效性和模拟退火算法求解的高效性。     

适用于探空火箭的图像采集与压缩系统

针对探空火箭遥测带宽低、图像监控通路多、系统小型化等设计难点,提出一种基于ADV212的图像采集与压缩系统设计方案。采用可以同时支持无损和高压缩比有损压缩的JPEG2000图像压缩标准,提出适用于箭上图像采集特点的通道切换和中断处理策略,并以"乒乓"操作的流水线作业方式实现多路图像通道数据吞吐,通过两个实时发送通道和一个缓存发送通道向火箭遥测链路发送图像数据。提出一种具有动态帧频和压缩比的图像压缩方案,解决了探空火箭遥测带宽有限这一问题。本设计以Virtex-4系列现场可编程门阵列作为系统控制核心,采用ADV7182和ADV212分别完成图像的采集和压缩,分别采用静态随机存取存储器和同步动态随机存储器实现图像的实时传输和缓存传输。通过比较图像间的峰值信噪比值,试验并分析了适用于电荷耦合元件图像的压缩滤波器和小波变换级数,得到了较为满意的图像质量。设计较好地满足了本次空间环境垂直探测探空火箭的图像采集任务。     

Two‐agent scheduling on a single sequential and compatible batching machine

We study two‐agent scheduling on a single sequential and compatible batching machine in which jobs in each batch are processed sequentially and compatibility means that jobs of distinct agents can be processed in a common batch. A fixed setup time is required before each batch is started. Each agent seeks to optimize some scheduling criterion that depends on the completion times of its own jobs only. We consider several scheduling problems arising from different combinations of some regular scheduling criteria, including the maximum cost (embracing lateness and makespan as its special cases), the total completion time, and the (weighted) number of tardy jobs. Our goal is to find an optimal schedule that minimizes the objective value of one agent, subject to an upper bound on the objective value of the other agent. For each problem under consideration, we provide either a polynomial‐time or a pseudo‐polynomial‐time algorithm to solve it. We also devise a fully polynomial‐time approximation scheme when both agents’ scheduling criteria are the weighted number of tardy jobs.     

某型锅炉蒸发管束选材方案的探讨

通过对КВΓ－７６型锅炉蒸发管束强度计算的分析验算,发现原设计在某些参数的选取上存在明显的误差,导致选材要求过高．经过论证,得出可用普通碳素钢管替代低合金钢管的结论．